Birdcage

Birdcage (pronounced burd-keyj)

(1) A cage for confining birds (built traditionally with wire or wicker and used also as bird cage & bird-cage).

(2) Something that in form (at any scale) resembles (even vaguely) the construction of a birdcage.

(3) In aviation industry slang, the airspace over an airport and the aircraft there in flight.

(4) An area on a racecourse where horses parade before a race (“paddock” preferred in US use).

(5) In US slang, a used-car lot (now rare).

1480–1490: The construct was bird + cage.  Bird was a pre-900 form, from the Middle English byrd, from the Old English bridd & brid (which in the Northumbrian dialect was “bird”) (young bird, chick; feathered, warm-blooded vertebrate animal of the class Aves).  The Old English bird was an unusual collateral form of bridd and originally meant “young bird, nestling” whereas the typical Old English for bird was fugol, related to the noun fowl, of uncertain origin with no known cognates in any other Germanic language (speculated links to umlaut dismissed by etymologists).  Because birds are a creature doubtlessly noticed and in some form named by people since the early days of human evolution, it’s not surprising it believed variants in Middle English may go back to “an ancient period”.  From the early to mid-fourteenth century, “bird” increasingly supplanted “fowl” as the most common term.

Cage dates from 1175–1225 and was from the Middle English cage (and the earlier forms kage & gage), from the Old French cage (prison; retreat, hideout), from the Latin cavea (hollow place, enclosure for animals, coop, hive, stall, dungeon, spectators' seats in a theatre), the construct being cav(us) (hollow) + -ea, the feminine of -eus (the adjectival suffix); a doublet of cadge and related to jail.  The Latin cavea was the source also of the Italian gabbia (basket for fowls, coop).  The noun (box-like receptacle or enclosure, with open spaces, made of wires, reeds etc) typically described the barred-boxes used for confining domesticated birds or wild beasts was the first form and from circa 1300 was used in English to describe “a cage for prisoners, jail, prison, a cell”.  To “rattle someone's cage” is to upset or anger them, based on the reaction from imprisoned creatures (human & animal) to the noise made by shaking their cages.  The noun bird-cage (also birdcage) was in the late fifteenth century formed to describe a "portable enclosure for birds", as distinct from the static cages which came to be called aviaries.  The verb (to confine in a cage, to shut up or confine) dates from the 1570s and was derived from the noun.  The synonyms for the verb include crate, enclosure, jail, pen, coop up, corral, fold, mew, pinfold, pound, confine, enclose, envelop, hem, immure, impound, imprison, incarcerate, restrain & close-in.  Cage is a noun, verb and (occasional) adjective, caged & caging are verbs (used with object) and constructions include cage-less, cage-like, re-cage; the noun plural is cages.  Birdcage is a noun; the noun plural is birdcages.

The term gilded cage (often heard in the form “trapped in a gilded cage” describes a place (or situation) which superficially is attractive but is in some way constraining; a comfortable but confined situation.  The point of the “gilded cage” is the “effective confinement” is achieved not by the “cage” but by the unwillingness of the confined to relinquish the luxury of their “gilded lifestyle”; it’s thus a self-imposed “imprisonment”, certain comfort valued more than the uncertainties of freedom.  The term is thought to have been coined by the writers of the popular song A Bird in a Gilded Cage (1900).  History (some of it recent) is littered with examples of those “trapped in a gilded cage” and overwhelming they’re well-bred women, compelled for various reasons (dynastic, financial, political etc) to marry someone not of their choice.  A classic example of the adage “for everything you do there’s a price to be paid”, the best documented are the most miserable but the phenomenon is an illustration of the way what ultimately matters is not the situation in which one finds oneself but how one reacts.

Consuelo Vanderbilt (circa 1900), oil on canvas by Paul César Helleu (1859–1927).

Consuelo Vanderbilt (1877-1964) was the most illustrious of the American “dollar princesses” who crossed the Atlantic to marry increasingly impoverished members of the British aristocracy.  Unhappily (and tearfully), aged 18, she became Duchess of Marlborough, diligently and dutifully (for a while) fulfilling the role her father’s money had purchased.  The French painter Paul César Helleu was noted for his portraits of society women of the Belle Époque and, working on commission, he was not above flattery but there’s no doubt he captured the beauty of the slender Consuelo and they may have had had an affair, a diversion not uncommon among dollar princesses chaffing against the bars of their gilded cage.  While in the history texts most in gilded cages are there because they led tortured, unhappy lives, there were some who resolved to “make the best of things” and just try to enjoy the gild: taking the rough with the smooth as it were.  F Scott Fitzgerald (1896–1940) in The Great Gatsby (1925) described Daisy Buchanan as a “golden girl” who had opted for the security of marrying money and was thus consigned to life as a “beautiful little fool” in a “gilded cage of class and gender politics.”  There are worse ways to live and as George Bernard Shaw (GBS; 1856-1950) observed, while money may not buy happiness, surely it is better to be miserable and rich than miserable and poor.   

Lindsay Lohan in The Birdcage, Flemington Racecourse, Melbourne, Victoria, Spring Carnival Derby Day, 2 November, 2019.

The origin of the curious use of “birdcage” to describe the enclosed area where horses are saddled and walked before and after a race lies in an architectural analogy, the space enclosed traditionally by light iron railings, often decorative, painted white and closely spaced.  Spectators standing beyond the perimeter looked at the horses, much as one looks at birds inside an aviary; the metaphor thus “perspectival”.  In truth, the usually the circular or polygonal enclosure didn’t really resemble a large ornamental cage but the construction of the ironwork did recall the sides of a “birdcage” although obviously there was no need exactly to replicate the design, horses being unable, Pegasus-like, to “fly away”.  The term remains in common use in the UK, Australia and New Zealand where it had become part of the “social scene” of race days, the photographs published on society pages or Instagram often taken from “the birdcage”; at some tracks the spectator area has been remodelled for exactly that purpose with appropriate promotional backdrops.  In North America, used of “birdcage” in this context is rare, “paddock” the preferred term.

A similar linguistic adaptation was the “bullpen” (in baseball, an enclosed area for pitchers to practice in or “warm up”), the word possibly borrowed from rodeos where it literally was the (well-fenced) holding area for bulls.  In baseball, “bullpen” became a collective noun for pitchers and functioned as a synecdoche.  From the sport, it spread and came to be used figuratively to describe (1) “a place for someone or something to get prepared for some purpose” and (2) a military prison or its enclosing stockade.  Some decades after bullpen entered the vernacular of the sport, leagues were formed for women’s baseball and although in ranching the term “cowpen” (fenced area for holding cows) was well-known, baseball sensibly decided its nomenclature etymologically was detached from biological sex so assembled female pitchers also warmed-up in a bullpen and despite a recent trend towards gender-neutrality in sporting terminology, “bullpen” survived as fossilized baseball jargon.  Linguistically uncontroversial in the sport was “birdcage mask” which was the protective mask worn by catchers, the “birdcage element” referring to the thick wire structure protecting the face while still permitting adequate vision.

Lindsay Lohan (birdcage scene), Rumors (Official Music Video) from Speak (2004).

The origin of the use in baseball is contested although all seem to agree it came into use very early in the twentieth century.  One explanation is that by then it had become common for late-coming spectators to be cordoned off in a “standing room” area in “foul territory” (to the sides of the field where any ball hit was deemed “out of bounds”) and, noting the laggards were “herded like cattle”, “bullpen” was borrowed from the rodeo.  When those areas were re-purposed as the pitchers warm-up space, the designation stuck and the notion relief pitchers were once viewed “bullish” in temperament is thought one of baseball’s many myths.  An alternative theory is the use was at least influenced by the outfield fences at baseball grounds once often displaying advertisements for Bull Durham tobacco and in front of these relief pitchers would wait to be called into play and the use was thus associated with the billboards but for this there’s no documentary evidence. 

The Berghof, circa 1940.

By definition, a birdcage is of course “something in which one keeps one’s pet bird” but they can be also, certainly in their more elaborate forms, a decorative piece of furniture, a symbol of domesticity in the same way George Orwell (1903-1950) in Keep the Aspidistra Flying (1936) used the Aspidistra plant as an identifier of the middle-class though in fairness to the reputation of the perennial herbaceous plant, their popularity in English houses owed much to them being among the species most tolerant of the sometimes smoky atmosphere in an era when coal and wood burned on open fireplaces was a common form of heating.  They were thus an ideal house plant, being tolerant of neglect and suited to shade while their luxuriant growth meant they were effective oxygenators of air high in CO₂.  

Art Nouveau brass birdcage on conforming tripod stand.  The piece featured a domed tops, lift-out trays, swing perch and two small bird-seed feeders.

Tough, the Aspidistra wasn’t exactly “unkillable” but one really had to try and the plants thus were for generations something of a middle class fixture; it was in this sense Albert Speer (1905–1981; Nazi court architect 1934-1942; Nazi minister of armaments and war production 1942-1945), in his (sometimes reliable) memoir Erinnerungen (Memories or Reminiscences) and published in English as Inside the Third Reich (1969) noted the birdcage in Adolf Hitler’s (1889-1945; Führer (leader) and German head of government 1933-1945 & head of state 1934-1945) country house, some years before it was enlarged in the sprawling complex centred on the Berghof:  “After Berchtesgaden came the steep mountain road full of potholes, until we arrived at Hitler's small, pleasant wooden house on Obersalzberg.  It had a wide overhanging roof and modest interior: a dining room, a small living room, and three bedrooms. The furniture was bogus old-German peasant style and gave the house a comfortable petit-bourgeois look.  A brass canary cage, a cactus, and a rubber plant intensified this impression. There were swastikas on knickknacks and pillows embroidered by admiring women, combined with, say, a rising sun or a vow of ‘eternal loyalty.’  Hitler commented to me with some embarrassment: ‘I know these are not beautiful things, but many of them are presents.  I shouldn't like to part with them.’”  Speer made no mention of a canary or any other bird sitting in the cage and nor is there a reference in contemporary accounts; that is in keeping with Hitler’s known views on how animals should be treated and while his attitudes to humanity proved reprehensible, those on wildlife were quite enlightened.

Art Deco birdcage.

Although there’s obviously some functional overlap, as well as birdcages, there are birdhouses, coops, aviaries, pigeon lofts.  A birdhouse is a “small house” for birds (and known also as a nest box).  Made usually of wood and mounted somewhere the residents will be protected from ground-dwelling predators, birdhouses are outdoor structures designed not to imprison wild birds but provide them a shelter where they can build nests.  A coop (in this context) is a place where birds are kept but while a birdcage is for a household pet, a coup is for productive (egg-laying and sometimes feathers or meat) birds and are enclosures built outside, partially enclosed (“chicken coops” the best known).  The word aviary has a wide vista and can be anything from a relatively small structure housing two or more birds to vast zoo-like areas in which there may be a mix of captive and wild creatures.  A pigeon loft (known also as a dovecote) is a specialized type of birdhouse, often placed on a building’s roof or other elevated spot in which domestic pigeons are bred and housed, usually for use in the sport of pigeon racing; the element “loft” tends to be used irrespective of the location of the structure.  A synonym was columbarium, from the Latin columbārium, the construct being columb(a) (pigeon) +‎ -ārium (place for) and because the sport became popular among the aristocracy of the Ancien Régime (circa 1500-1789) in France, the construction of columbaria because something of a contest (al la the “size race” in luxury yachts between today’s billionaires) and architects were engaged to design large, elaborate structures, sometimes emulating the style of the owner’s chateau.

C3 Corvette T-Top birdcage.

From its debut in 1953, the Chevrolet Corvette’s body has always been made from non-steel composite materials ranging from simple GRP (glass-reinforced plastic and better known as fiberglass) to materials of increasing complexity so rust has never afflicted the external panels but beneath all those curves and angels is much vulnerable including the frame and “birdcage”, that latter an object of veneration or despair, depending on its condition.  A crucial component in the overall strength and structure of a Corvette, the birdcage was first integrated into the design when the C2 (1962-1967) was released and the same concept was used for the C3 (1968-1982): a reinforced frame surrounding the cabin, the nickname from the overall shape which vaguely recalled a birdcage.  Similar in outline to the “safety cell” for which Mercedes-Benz was in 1952 granted Patent 854157 (rigid passenger cell with front and rear crumple zones), the birdcage consisted of boxed steel channels with pillars running from the base of the windshield (A-pillars), along the rear of the cabin, and down to the frame kick-up behind the seats.  Although not really a complex piece of engineering, the fact that so integral to the car is the structure, for extensive repairs to be performed considerable disassembly is required and the cost of out-sourcing such a task often can exceed the value of the car; economics thus suggest it’s usually advisable to find a car with birdcage in sound condition, repairs often financially viable only if the car is rare (ie with a highly desirable specification or even a celebrity association).  A visual inspection is best left to experts because unless it has just emerged from a comprehensive restoration, all C2 & C3 Corvettes will have at least some light, surface rust but it can take an expert eye to tell the difference between that and rot which demands attention.  Fortunately, the Corvette community is vibrant with publications and on-line guides detailing the features & foibles of the birdcage.

Troubled birdcage: Rusted C3 windshield frame left-lower outer corner (left) and a replacement corner component (1968-1972) @ US$199.00 from Corvette Central.

On both the C2 & C3, there were two variants of the design, one for the coupe (T-top in the C3) and the one for the roadster (the last such C3 made in 1975) but all shared the susceptibility to rust, especially if used in areas with high salt-exposure (coastal regions or places where the stuff was spread on icy roads) and the part most often affected severely was the “Windshield Frame Lower Outer Corners”, replacement sections available and in two different versions for the C3, reflecting the design changes in the post 1973 cars.  However, while the birdcage's most afflicted components, the windshield frame’s outer corners are not unique and the hinge pillars & lock pillars (including the body mount at the bottom) also are notably rust-prone.

C4 Corvette structure diagram from Mobile Web-Cars.

The C4’s (1984-1996) “birdcage” was a bit of a gray area because although routines still is used, materially and structurally it was quite different from the classic template set by the C2 & C3.  What was carried over was welded steel structure surrounding the windshield frame, A-pillars, roof rails, B-pillars and rear window frame which created a defined passenger safety cell distinct from the outer composite body panels so it seems reasonable still to use the term but the C4 did not have a “stand-alone” frame onto which the body was mounted, the “birdcage” being an integral part of the frame.  There were a number of design imperatives which dictated the path chosen for the C4 and it was built with a uniframe in which front and rear frame sections were integrated, thereby providing greater rigidity so no longer was the “birdcage” a kind of bolted-on” internal scaffold but an inherent part of the whole.  The C4 was the last Corvette in which something recognizably “birdcagesque” would appear.

Chevrolet’s technical rendering of the C8’s structure.  In engineering, materials science and computing, much has advanced since 1962.

However, the structural integrity the birdcage in 1962 provided needed still to be achieved but the “brute-force” approach of the C2-C3-C4 era was replaced with more advanced techniques and by the time the mid-engined C8 was released in 2019, the platform structurally would have been unrecognizable to anyone familiar with the earlier generations.  The C8 is built around a core element (the so-called “backbone” or “spine”) which can be visualized as a large aluminum tunnel running down the centre of the car and from this the chassis gains its primary torsional stiffness.  The body panels are almost all non-structural and while there is (as is now universal) a reinforced “safety cell” around the cabin, this is protection of occupants in the event of an “impact incident” (better known as a “crash”).

The Birdcage: The Maserati Tipo 60/61 (chassis #2549, clothed & exposed).

Upon released in late 1962, the structure in the C2 Corvette gained the nickname “birdcage” because of the shape but before that, there was the Maserati “Birdcage”, the Tipo 60/61 (1959-1961) so dubbed because it departed from the typical approach of those building space fames in that instead of relatively few, thick tubes and sections, Maserati used many more but they were slender.  Observers were much taken with the apparent delicacy of the construction and although the engineers assured all the intricate latticework of some 200 chromoly steel tubes (welded often in triangulated form in the points of highest stress) was a design delivering both lightness and rigidity to match the more robust-looking creations.  Those admiring the intricacy were struck more by the resemblance to the thin wires of birdcages.  

Mercedes-Benz 300 SLR (W196S, upper) & 300 SL (W198, lower).

One of the reasons the Maserati’s skeleton looked so delicate was that the space-frame had become associated with Teutonic-flavored construction like that used by Mercedes-Benz for its 300 SL & 300 SLR.  Both shared the same method of construction but despite the names and the visual similarity between the two, there were few common components beyond the nuts, bolts & screws.  The 300 SL (W198; 1954-1963) was a road car while the SLR (W196S; 1955) was a lengthened version of the W196R Formula One Grand Prix car with a sexy body and an enlarged (though somewhat detuned) straight-eight engine; in the sport, it would be the last of the straight-8s.

Scale model of Maserati Typo 60/61 Birdcage by CMC.

The final and most remarkable Maserati birdcage was Tipo 63 Birdcage which featured a mid-mounted 3.0 litre V12.  The Tipo 60 & 61 used front-mounted four-cylinder engines in displacements of 2.0 & 2.9 litres and although there were problems which never wholly were solved (although the reliability did over time improved), the platform enjoyed some success because its forgiving nature lent it excellent handling characteristics and in long-distance events, the lack of power was somewhat offset by the modest fuel consumption and relative low tyre wear, time not spent in the pits as valuable as seconds shaved off lap-times.  Unlike some of its competitors, Maserati did not have the financial resources to “keep up with the times” and develop from scratch a mid-engined sports car so the factory took the approach familiar to many an American engineer and hot-rodder: put in a bigger engine.

1961 Maserati Birdcage Typo 63.  Although installing the V12 didn’t realize the hope-for success, the car will always have a place in the annals of “great moments in exhaust systems”.

Actually, the V12 wasn’t that much bigger than the largest of the four cylinder units used but, with a pedigree beginning with a brief (though unsuccessful) career in the Maserati 250F Grand Prix car, it certainly delivered more power.  Because it was a “relatively” simple matter of blending an existing engine and existing platform, the project quickly was accomplished and Maserati had a mid-engined car on the grid before anyone else and one which could top 305 km/h (190 mph) on long straights.  Unfortunately, placing the big lump of a V12 to the rear upset the Birdcages’s fine balance although one did place fourth in the 1961 Le Mans 24 Hours endurance classic (a place where a 190 mph top speed was unusually valuable), a result which proved to be the marque’s high-water mark in the famous event.

Superbird

Superbird (pronounced soo-per-burd)

(1) A single-season (1970) version of the Plymouth Road Runner with certain aerodynamic enhancements, built to fulfil homologation requirements for use in competition.

(2) A one-off Falcon XA GT built by Ford Australia for the motor show circuit in 1973.

(3) A series of 700-odd XA Falcon Hardtops (RPO77) built by Ford Australia in 1973.

1969: The construct was super + bird.  The Middle English super was a re-purposing of the prefix super-, from the Latin super, from the Proto-Italic super, from the primitive Indo-European upér (over, above) and cognate with the Ancient Greek ὑπέρ (hupér).  In this context, it was used as an adjective suggesting “excellent quality, better than usual; wonderful; awesome, excellent etc.  Bird was from the Middle English bird & brid, from the Old English bridd (chick, fledgling, chicken).  The origin was a term used of birds that could not fly (chicks, fledglings, chickens) as opposed to the Old English fugol (from which English gained the modern “fowl”) which was the general term for “flying birds”.  From the earlt to mid-fourteenth century, “bird” increasingly supplanted “fowl” as the most common term.  Superbird is a noun; the noun plural is Superbirds and an initial capital is appropriate for all (standard) uses because Superbird is a product name.  If used as hoc for some other purposes, it should probably be without the initial capital.

Of super- and supra-

The super- prefix was a learned borrowing of the Latin super-, the prefix an adaptation of super, from the Proto-Italic super, from the primitive Indo-European upér (over, above) and cognate with the Ancient Greek ὑπέρ (hupér).  It was used to create forms conveying variously (1) an enhanced sense of inclusiveness, (2) beyond, over or upon (the latter notable in anatomy where the a super-something indicates it's "located above"), (3) greater than (in quantity), (4) exceptionally or unusually large, (5) superior in title or status (sometimes clipped to "super"), (6) of greater power or potency, (7) intensely, extremely or exceptional and (8) of supersymmetry (in physics).  The standard antonym was “sub” and the synonyms are listed usually as “on-, en-, epi-, supra-, sur-, ultra- and hyper-” but both “ultra” and “hyper-” have in some applications been used to suggest a quality beyond that implied by the “super-” prefix.  In English, there are more than a thousand words formed with the super- prefix.  The supra- prefix was a learned borrowing from the Latin suprā-, the prefix an adaptation of the preposition suprā, from the Old Latin suprād & superā, from the Proto-Italic superād and cognate with the Umbrian subra.  It was used originally to create forms conveying variously (1) above, over, beyond, (2) greater than; transcending and (3) above, over, on top (in anatomy thus directly synonymous with super) but in modern use supra- tends to be differentiated in that while it can still be used to suggest “an enhanced quality or quantity”, it’s now more common for it to denote physical position or placement in spatial terms.

Superbirds of the northern & southern hemispheres

1969 Dodge Daytona (red) & 1970 Plymouth Road Runner Superbird (blue).

The Plymouth Superbird was a "homologation special" built only for the 1970 model year.  By the mid-1950s, various race categories sanctioned by NASCAR (National Association for Stock Car Auto Racing) had become popular with both competitors and audiences, something which induced the manufacturers, more or less openly, to provide resources to the teams running their products.  This had started modestly enough with the supply of parts and technical assistance but so tied up with prestige did success become that some created competition departments and, officially and not, ran teams or provided so much financial support that effectively they functioned as factory operations.  NASCAR had begun as a "stock" car series in the literal sense that the first cars used were "showroom stock" with only minimal modifications but that didn't last long, cheating soon rife and in the interests of spectacle (ie higher speeds and thus more crashes), certain "performance enhancements" were permitted although the rules were always intended to maintain the original spirit of using cars which were "close" to those sold from the showroom floor.

Lindsay Lohan, as a superbird: generative AI (artificial intelligence) rendering by Stable Diffusion.

Despite NASCAR's efforts, the cheating didn't stop although the teams became more adept in its practice and one model produced by Chrysler's Dodge division typified the way manufactures worked within the homologation rules to game the system.  The rules (having to build and sell a minimum number of a certain model in that specification) had been intended to restrict the use of cars to “volume production” models available to the general public but in 1956 Dodge did a special run of what it called the D-500 (an allusion to the number which had to built to be “legal” under NASCAR regulations).  Finding a loophole in the interpretation of the word “option” the D-500 appeared in the showrooms with a V8 rated at a then impressive 260 HP (horsepower).  Distinguished by crossed-flag “500” emblems on the hood (bonnet) and trunk (boot) lid, the model was Dodge’s high-performance offering for the season and had things been left at that, it wouldn't have been in any way exceptional.  However, the trickery lay in the option list, knowledgeable buyers able to "tick the box" for the D-500-1 (or DASH-1) option, which made one's D-500 close to race-ready and, to ensure eligibility in NASCAR’s various competitions, it could be ordered as a two-door sedan, hardtop or convertible.  In its default configuration with dual four-barrel carburetors, the D-500-1's 315 cubic inch (5.2 litre) V8 thought to produce around 285 HP but more significant was the inclusion of heavy-duty suspension and braking components, more valuable on the circuits than additional power.  It was a successful endeavour which both triggered an "arms race" between the manufacturers and intensified the ongoing battle with the NASCAR regulators who did not wish to see their series transformed into something contested by specialized racing cars which bore only a superficial resemblance to the “showroom stock”.  Well before the 2020s, it was obvious NASCAR had surrendered to the inevitable but more than a decade, the battle raged.

Evening (The Fall of Day) (1869–1870), charcoal, crayon), oil & graphite on canvas by English-born US artist William Rimmer (1816–1879), Museum of Fine Arts Boston, Massachusetts.

That someone ran a Stable Diffusion prompt to depict Lindsay Lohan with wings is in the long tradition of winged humans, something in the imagination at least since the tale of Ικαρος (Icarus) was told in the mythology of Antiquity.  In the best-known version, Icarus was the son of Daedalus and one of Minos' slaves called Naucrate and it was when Daedalus explained to Ariadne how Theseus could find a way to escape the Labyrinth, so enraged was Minos he imprisoned Daedalus and his son in the structure.  Undeterred, Daedalus took fallen feathers and fashioned wings for them both, applying wax to fix them to their shoulders; a cautious parent, Daedalus warned Icarus to fly neither too close to the ground nor too near the sun.  Icarus however was headstrong and, finding the power of flight intoxicating, soared higher and higher until he was so close to the sun the heat melted the wax, disintegrating his wings; no longer a superbird, he fell into the sea around the island of Samos and drowned.  As a tribute, the sun god Helios called the body of water the Ικάριο Πέλαγος (Ikario Pelagos) (Icarian Sea), the name still used of the stretches of the Aegean between the Cyclades and Asia Minor (the modern-day Türkiye Cumhuriyeti (Republic of Türkiye, still often referred to as Turkey)).  Other versions from Antiquity have him drowning in nautical accidents but generally his name is used as a cautionary tale about the consequences of not heeding the advice of those who know better although, curiously, there’s also the odd reference to him having invented woodwork and carpentry.  In Rimmer’s evocative drawing, the model has always been presumed to be the doomed Icarus but the artist may also have had in mind the fallen angel Lucifer, the imagery of a prideful descent perhaps influenced by John Milton’s (1608–1674) Paradise Lost (1667) or Dante Alighieri’s (circa 1265–1321) Divina Commedia (Divine Comedy (circa 1310-1321)).

LP (long playing) album label for Led Zeppelin’s Presence (1976), issued by Atlantic Recording Corporation on the Swansong label.

The English graphic art production house Hipgnosis (best known for album covers which were (in the pre-CD (compact disc) era) for a quarter century-odd a vibrant part of the pop-art world) used Rimmer’s Evening as a model for the logo of Swan Song Records, set up in 1974 by the English band Led Zeppelin (1968-1974) after the expiration of their distribution contract with Atlantic Records (which anyway handled the distribution of Swan Song’s products).  The idea was to combine the imagery of Rimmer with the wings of a white swan and the notion of “songs”.  At the time, the popular music business substantially was controlled by the major labels and Swan Song was one of a number of (usually short-lived) labels created in an attempt to give musicians who could not secure a recording contract a way of having their output reach audiences.  Although the label remains active for the purposes of re-issuing older material, after the surviving members of Led Zeppelin disbanded in 1980, there were only spasmodic releases until in 1983 it was announced active operations would cease and no new contracts would be executed.

1970 Plymouth Superbird (left) and 1969 Dodge Daytona (right). Despite the obvious conceptual and visual similarities, it's when two are seen in close proximity (especially in profile) that the differences become more obvious, the Superbird's nose-cone less pointed, the rear wing higher with a rake more acute.  

By 1969, NASCAR's regulators had fine-tuned their rules restricting engine power and, further to "equalize" things, had mandated minimum weights.  Scope for innovation was thus limited so manufacturers turned to the then less policed field of aerodynamics, ushering what came to be known as the "aero-cars" and it was an era when the discipline had become suddenly fashionable, wings and spoilers sprouting on the cars used in Formula One and the Can-Am (the wonderful series for (Group 7) unlimited displacement sports cars) although initially, Chrysler's approach had been a modest "tweaking" rather than a radical alteration of the lines.  When the aerodynamics of the sleek-looking 1968 Charger proved to be unexpectedly inefficient, Dodge for 1969 modified the most suspect areas at the front and rear, "smoothing out" the air-flow and labelling the result the "Charger 500" in a nod to the NASCAR homologation rules which demanded for eligibility the production of 500 mechanically identical cars.  However, unlike the quite subtle modifications which proved so successful for Ford’s Torino Talladega and Mercury’s Cyclone Spoiler, what was done to created the 500 did not resolve the issues so production ceased after 392 were built.  Dodge solved the problem of the missing 108 needed for homologation purposes by subsequently introducing a different "Charger 500" which was just a trim level and nothing to do with homologation but, honor apparently satisfied on both sides, NASCAR turned to the telescope the same blind eye chosen when it became clear Ford with the Talladega and Cyclone Spoiler had also "bent the rules" a bit.

The rear wings (like the nosecone, the units on the Daytona and Superbird were not interchangeable) genuinely were there for the aerodynamic advantage they conferred but there were possibilities for repurposing.  Most of the photographs (left) of “washing hanging out to dry” from a wing were staged for comic effect but, between events, racing drivers really would use the structure as a place to air sweaty race overalls while for photographers, amateurs and professionals alike, the wings also proved an irresistible prop which could be adorned with decorative young ladies.  Had OnlyFans existed in the era, it can be guaranteed some content providers would have been juxtaposed against a Superbird’s wing.

Not discouraged by the 500's aerodynamic recalcitrance, Dodge recruited engineers from Chrysler's aerospace & missile division (which was being shuttered because Richard Nixon's (1913-1994; US VPOTUS 1953-1961 & POTUS 1969-1974) détente era had arrived and the US & Soviet Union were beginning their arms-reduction programmes) and quickly created the Daytona, adding to the 500 a protruding nosecone and high wing at the rear.  As successful on the track as the scale-models had been in the wind-tunnel, this time the required 500 really were built (a reported 503 leaving the line).  Not best-pleased, NASCAR responded by again moving the goalposts, requiring manufacturers to build one example of each vehicle for at least half their registered dealers (exclusive or shared) so, there at the time being a reported 3832 franchised Plymouth dealers in the US, duly the company built a reported 1935 Road Runner Superbirds (although NASCAR apparently stopped counting once they'd verified the existence of the 1920 which satisfied their rules).  It was an exercise probably more expensive for Plymouth than Dodge because it's believed neither division made any profit on their "homologation cars" and some claim each was invoiced to dealers at a loss.  Now more unhappy than ever, NASCAR lawyered-up and drafted rules which included restricting the aero cars to an engine displacement of 5.0 litre (305 cubic inch) while permitting the rest of the field to run the full 7.0 litres (427 cubic inch); this rendered the aero-cars uncompetitive and their brief, shining moment ended.

Blondes have more fun: Emelia Hartford (b 1993) and her 1970 Plymouth Superbird at the Goodyear San Angelo Proving Grounds.  Before her restoration efforts, it had for 30 years sat neglected.

The estimable Emelia Hartford both builds and races cars and in 2025 she took a fully-restored NASCAR race Superbird to the high-speed test track at Goodyear’s San Angelo Proving Grounds facility in Texas.  Although in 1970 the boffins at Chrysler had studied their slide-rules and calculated that, in NASCAR-spec, a Superbird could not, even under ideal conditions, achieve 220 mph (354 km/h), it was an age of empiricists and nobody would be convinced until the rubber hit the road.  The numbers really did come from slide-rules and pencil & paper because, although engineers were by then using computers (they took up entire rooms), for many calculations, the old ways produced results more quickly.  Ms Hartford has a presence on YouTube and among her viewers must be some of Goodyear’s staff because somewhere in the corporate memory was jogged the recollection of the day, all those years ago, when a NASCAR Superbird had not quite hit the 220 mph mark.  Goodyear thus extended Ms Hartford an invitation to the proving grounds to see if it really was possible; it transpired the slide-rule operators had, more than a half century earlier, been right, the restored Superbird achieving 211 mph (340 km/h).

1969 Ford Torino Sportsroof (left), 1969 Ford Torino Talladega (centre) and 1970 Ford Torino Sportsroof (left).  What Ford did for its aero cars was much less dramatic than what Chrysler's missile engineers concocted but the modifications proved remarkable effective.  The 1970 Torino (the design language of which Ford Australia adopted for the Falcon Hardtop (1972-1978)), although it look sleek and the racing teams were promised “specific efficiencies”, proved less slippery than the Talladega so team managers for some time continued to use the older platform.

Given more power than they had when run in NASCAR spec, the aero cars could go faster but Ford’s experiments had proved what their calculations had suggested: above 190 mph, it would take an additional 50 HP to achieve an additional 3 mph (5 km/h) but an even greater increase would be realized simply by slightly altering the shape of the nose, lowering the leading edge by about an inch (25mm).  Under the rules, it was impossible to gain 50 HP but the rhinoplasty, although at a glance imperceptible to the untrained eye, successfully delivered the improved performance of the Talladega and Cyclone Spoiler.  The point was emphasised when in 1971 one of the Daytonas just rendered unlawful by NASCAR was taken to the Bonneville Salt Flats where it was used to set 28 USAC (United States Auto Club) & FIA (Fédération Internationale de l'Automobile, the International Automobile Federation) world speed records.  Although modified to produce more power and fitted with low-drag tyres and a very tall (ie numerically low) final drive ratio, even under Bonneville’s ideal conditions, the top speeds recorded were 216.465 mph (348.367) over a flying mile and 217.368 (349.820) over a flying kilometre.  Ms Hartford's 211 mph run was thus both impressive and in line with expectations but more may have been possible because, as the NASCAR teams discovered, fitting simple "smooth" fibreglass covers atop the A-pillars delivered a precious 1 mph (1.6 km/h).

The graphic for the original Road Runner (1968, left) and the version used for the Superbird (1970, right).  The image was used under licence from Warner Brothers, as was the distinctive "meep-meep" tone of the horn (the horn button on the steering wheel actually read "beep beep"), the engineering apparently as simple as replacing the aluminium strands in the mechanism with copper windings.  The fee for the cartoon character was US$50,000 with the rights to the "beep-beep" invoiced at a further US$10,000; both proved sound investments.  

Discounted Superbird, 1970.  When new, the seriously weird looking machines often lingered on lots and deals had to be done; nobody could have anticipated what they'd become a half-century on.

So extreme in appearance were the cars (at certain angles, distinctly they were ungainly) they proved at the time sometimes hard to sell and as well as being heavily discounted, some were converted back to the standard Road Runner specification by dealers anxious to get them out of the showroom (a generation on, some Volkswagen dealers resorted to the same approach after US buyers proved less attracted to the Harlequin Golfs than Europeans had been to the Harlekin Polos).  Views changed over time and they're now much sought by collectors, the record known price paid for a Superbird being US$1,650,000 for one of the 135 fitted with the 426 Street Hemi.  Despite the Superbirds having been produced in some four times the quantity of Daytonas, as collectables, they're treated as interchangeable with the determinates of price (all else being equal) being (1) engine specification (the Hemi-powered models the most desirable followed by the 6-BBL Plymouths (there were no Six-Pack Daytonas built) and then the 4 barrel 440s), (2) transmission (those with a manual gearbox attracting a premium) and (3) the usual combination of mileage, condition and originality.  Mapped on to that equation is the variable of who happens to be at an auction on any given day, something unpredictable.  That was demonstrated in August 2024 when a highly optioned Daytona in the most desirable configuration achieved US$3.36 million at Mecum’s auction in Monterey, California.

1969 Plymouth Road Runner advertisement.

The US$3.36 million achieved generated headlines on sites where such things are discussed, but what attracted the interest of amateur sociologists was the same Daytona had in May 2022 sold for US$1.3 million when offered by Mecum in an auction at the Indiana State Fairgrounds.  The US$1.3 million was at the time the highest price then paid for a Hemi Daytona (of the 503 built, only 70 were fitted with the Hemi and of those, only 22 had the four-speed manual) and the increase in value by some 250% was obviously the result of something other than the inflation rate.  The consensus was that although the internet had made just about all markets inherently global, local factors can still influence both the buyer profile and their behaviour, especially in the hothouse environment of a live auction.  Those who frequent California’s central coast between Los Angeles and San Francisco include a demographic not typically found in the mid-west and among other distinguishing characteristics there are more rich folk, able to spend US$3.36 million on a half-century old car they’ll probably never drive between purchase and a return to the auction circuit.  That’s how the collector market works, the cars now essentially the same sort of commodity as certain paintings; it's not that cars are art (although New York's MoMA (Museum of Modern Art) has a few on permanent exhibit including an early Jaguar E-Type (XKE, 1961-1974)) but the market structures and dynamics are more similar than they are different.

1970 Plymouth Hemi Superbird in TorRed over Black vinyl.  Between 2022-2025, its realized value fell by some US$1.2 million.

Still, it's a volatile market and some who “overpaid” by buying in a “peak market” have booked considerable losses when compelled to sell at a time when demand proved less buoyant.  Although the aero-cars are among the more collectable Mopars, they remain a traded commodity and about such things, all that can be guaranteed about their value is: “it will fluctuate”.  In 2025, a Hemi Superbird sold at auction for US$418,000 which, given its condition and specification, was at the lower end of expectations but in 2022, the same machine had gone over the block for US$1.65 million.  The loss booked was thus US$1.2 million-odd or around 75%, neither of those numbers encouraging for collectors and immediately, the conspiracy theorists began offering explanations involving the interplay of tax deductions, charitable donations and such.  There are of course cases where losses even greater in magnitude can be imagined; the early 1 Gb USB sticks sold for US$199.00 and were an immaculate, unused example still in its original blister pack to be offered for sale in 2026, the nominal loss would be greater than 75%.  Still, “vintage” USB sticks are not (yet) a collectable and most who buy Superbirds don’t expect to suffer depreciation.

The Buick Skylark Grand Sport which in 1965 didn't become a Superbird.

Plymouth paid Warner Brothers US$50,000 to licence the trademarked image of the bird but “Superbird” was free to use which must have been pleasing, the avian reference an allusion to the big wing at the rear.  Curiously, had Buick a half-decade earlier decided to pursue what seems in retrospect a “sales department thought bubble”, Plymouth would have had to come up with something else because in 1965 Buick did run a one-off advertisement for their new Skylark GS (Grand Sport, the marque’s well-manicured toe in the muscle car water) with the copy headed “Superbird”.  It may seem strange Buick had been tempted by the muscle car business because, by the time the rungs of Alfred P Sloan’s (1875–1966; president of General Motors (GM) 1923-1937 and Chairman of the Board 1937-1946) "Sloan ladder" were in the 1940 finalized, Buick was second only to Cadillac in the five-step GM (General Motors) corporate hierarchy with Chevrolet at the bottom, followed by Pontiac and Oldsmobile.  However, the unexpected success the year earlier of Pontiac’s GTO had proved an irresistible temptation: there were profits to be made.  As it was, Cadillac was the only GM division in the era not to sell a muscle car.

1936 Buick Century.

Debatably, the Buick Century was the "first muscle car" and although in the mid 1930s some fanciful names appeared, it's unlikely anyone within GM would have thought of "Road Runner" or "Superbird", "Century" (denoting the 100 mph (160 km/h) speed all were able to achieve) thought both distinctive and informative.  The definition of “muscle car” is by some contested with the only consensus seemingly that none accept it can encompass FWD (front-wheel-drive), despite Cadillac in 1970 rating the Eldorado's 500 cubic inch (8.2 litre) V8 at at stellar 400 HP which was 25 more than Ford claimed for the Boss 429 Mustang which used a slightly detuned racing engine.  Ford of course had reasons to under-rate the stated output of the Boss 429 but it remains an amusing comparison.  The definition most prefer is: “a big engine from a big, heavy car installed in a smaller, lighter car” and although in 1936 the improvement in the economy remained patchy (and would soon falter), Buick rang in the changes, re-naming its entire line.  The new Century was a revised revised version of the model 60, created by replacing the 233 cubic inch (3.8 litre) straight eight with the 320 cubic inch (5.2 litre) unit from the longer, heavier Roadmaster.  Putting big engines into small cars was nothing new and during the interwar years some had taken the idea to extremes, using huge aero-engines, but those tended to be one-offs for racing or LSR (land speed record) attempts.  In Europe, (slightly) larger engines were sometimes substituted and British manufacturers often put six cylinder power-plants where once there had been a four but their quest was usually for smoothness and refinement rather than outright speed and the Century was really the first time a major manufacturer had used the concept in series production.  Many now acknowledge the Century as the LCA (last common ancestor) of the muscle cars which in the 1960s came to define the genre.

1970 Buick GSX 455 Stage 1.  It was available only in two colors and of the 678 built, 491 were Saturn Yellow and 197 Apollo White, the names topical because the Apollo moon missions of the era missions were launched using Saturn V rockets.

The model which in 1965 Buick seemingly flirted with promoting as the “Superbird” was the Skylark Grand Sport, built on the corporate intermediate A-Body shared with Chevrolet, Pontiac & Oldsmobile.  In its first season the Grand Sport was an option rather than a model and it used the 401 cubic inch (6.6 litre) Buick “Nailhead” V8 which technically violated GM’s corporate edict placing a 400 cubic inch displacement limit on engines in intermediates but this was “worked around” by “rounding down” to 400 for purposes of documentation and for that there was a (sort of) precedent; earlier Pontiac’s 336 cubic inch (5.5 litre) V8 contravened another GM rule and PMD (Pontiac Motor Division) solved that problem by claiming the capacity was really 326 (5.3) with the GM board again turning a blind eye for as long as it took for the foundry to organize the downsizing.  The Grand Sport option proved a success and for 1967 the package was elevated to a model as the GS 400, Buick’s new big-block engine a genuine 400 cid (there were also small-block Skylark GSs appropriately labelled GS 340 and later GS 350) and on the sales charts it continued to perform well, but, being a Buick, its appearance was more restrained than the muscle cars from the competition (including those from other GM divisions) so it tended to be overshadowed.  In 1968, that began to changed when the “Stage 1” option was introduced as a dealer-installed option.  What this did was increase power and torque, optimizing the delivery of both for quarter-mile (402 m) sprints down drag strips and as a proof-of-concept exercise (in terms of market demand), it worked and in 1969 the Stage 1 package appeared on the factory’s official option list.  When tested, it performed (on the drag strip) so well it was obvious the official output numbers were under-stated but things really clicked the next year when Buick enlarged the V8 to 455 cubic inches (7.5 litre), delivering 510 lb⋅ft (691 Nm) of torque, the highest rating in the industry.  It's often claimed Detroit wouldn't top this until the second generation Dodge Viper (ZB I, 2003-2006) debuted with its V10 enlarged to 506 cubic inches (8.3 litres) but the early 472 (1968) & 500 (1970) cubic inch (7.7 & 8.2 litre) Cadillac V8s were rated respectively at 525 lb⋅ft (712 Nm) & 550 lb⋅ft (746 Nm).

1970 Buick GSX brochure.

Buick in 1970 made available the GSX “Performance and Handling Package” which added a hefty US$1,100 to the GS 455’s base price US$3,098, a factor in it attracting only 678 buyers, 400 of whom ordered the “Stage 1” option.  In this context, use of the word “stage” was unusual but, like the color choices, that too was an allusion to the space program, the big Saturn V rockets divided into “stages”.  Although Buick buyers had for years overwhelmingly purchased cars with automatic transmission, the GSX was a Buick of a different flavor and this was reflected 199 of them being sold with the optional four-manual; clearly the GSX was attracting the much sought “conquest buyers” (ie those who usually purchased another brand).  Presumably, whether or not “conquests” most buyers presumably were content because the straight-line performance was impressive; while the GSX didn't possess the ability of genuine race-bred engines like the Chrysler Street Hemi, Ford Boss 429 or the most lusty of the big-block Chevrolets effortlessly to top 140 mph (225 km/h), on the drag strip, the combination of the prodigious low-speed torque and relatively light weight meant it could be a match for just about anything.  The use of “Stage 1” of course implied there would be at least a “Stage 2” (a la Pontiac’s Ram Air II, III etc) but the world was changing and only a handful of "Stage 2" components were assembled and shipped to dealers.  While both the GSX and Stage 1 would live until 1972, 1970 would be peak Buick muscle.

1967 Dodge Coronet R/T advertisement.

Another footnote to the tale is that in 1967, months before Plymouth released the Road Runner, Dodge (Plymouth’s corporate stable-mate) published an advertisement for the Coronet R/T (Road/Track) which must have been ticked off by the legal department because cleverly it included the words “road” and “runner” arranged in such as way a viewer would read them as “Road Runner” without them appearing in a form which might have attracted a C&D (cease & desist letter) from Warner Brothers.  Obviously, the tie-in with Road/Track was the idea of a machine suited both to street and competition use and the agency must have congratulated themselves but the satisfaction would have been brief because within hours of the advertisement appearing in magazines on newsstands, Chrysler’s corporate marketing division instructed Dodge to “pull the campaign”.  By then, Plymouth’s plans for the surprise release in a few months of the appropriately licensed “Road Runner” were well advanced and they didn’t want any thunder stolen.  The Dodge advertisement remained a one-off but the division must have wished they’d thought of using “Road Runner” themselves because the Super Bee (their later take on the Road Runner's "stripped down, low cost" concept) only ever sold a quarter of the volume of Plymouth’s original; it pays to be first but a flaky name like “Super Bee” can’t have helped.  Subsequently, the names Road Runner & Roadrunner (the latter which, without the initial capital, is the taxonomic term for the bird (genus Geococcyx and known also as chaparral birds or chaparral cocks) Warner Brothers' Wile E. Coyote could never quite catch) have been used for products as varied as a Leyland truck, sports teams, computer hardware & software and a number of publications.

Don't mess with popular and respected birds.

However, just because Chrysler’s lawyers dotted the i's and crossed the t's with Warner Brothers didn’t mean their involvement with the Plymouth Road Runner was done.  Shortly after the Road Runner was released late in 1967, the corporate office became aware “...certain Chrysler-Plymouth Division dealers in the Southwest [were] using live Roadrunner birds in local sales promotions and offering cash rewards for the capture of live specimens.”  That would at the time have seemed to dealers just a clever marketing gimmick but consulted, the legal department determined it was “...against Federal Law to hunt, capture kill, sell or offer to purchase a nonautomotive Roadrunner.”  Further to clarify, it was added Roadrunners were “…none-game birds classified as national resources and protected by Federal and International law.”  Who knew?  In the C&D letter Chrysler-Plymouth's public relations manager circulated to all dealers, the cultural significance was also mentioned, the Roadrunner described as a “...popular and respected bird... particularly in New Mexico where it is honored as the state's official bird.”  Accordingly, the corporate directive banned “...any future use of live Roadrunners in promotional activities.”

1970 Plymouth Road Runner with a Warner Brothers' interpretation of the genus Geococcyx in fibreglass.

So using live examples of the “popular and respected bird” was out but the marketing department wasn’t deterred and for promotional purposes later arranged production in fibreglass of large representations of the cartoon bird, designed to emerge, grinning and wide-eyed through the hood (bonnet) scoop which Chrysler called the “air-grabber” because it did what it said on the tin: funnelled desirable cold air straight to the induction system.  While "air grabber" might seem a bit brutish, it was that sort of car and in 1970 Plymouth briefly had called a variant of the idea the "Incredible Quivering Exposed Cold Air Grabber" but that improbable moniker didn't last much beyond an appearance in an early brochure (I.Q.E.C.A.G. one of history's less mnemonic initializms) and the hardware has only ever been known as the "shaker".  Being advertising, the large fibreglass birds owed much to the Warner Brothers depiction of the creature and little to how evolution had produced genus Geococcyx.  Some of the fibreglass promotional props survived to be exhibited protruding through a Road Runners air-grabber and die-cast models of the ensemble (car plus “popular and respected bird”) sometimes are available.

Australia's Ford Falcon Superbirds

1973 Ford XA Falcon GT Superbird, built for the show circuit and first shown at the Melbourne Motor Show in March 1973. 

Based on the then-current XA Falcon GT Hardtop, Ford Australia’s original Superbird was a one-off created for display at the 1973 Sydney and Melbourne Motor Shows, the purpose of the thing to distract attention from Holden’s new, four-door HQ Monaro model, a range added after the previous year’s limited production SS had generated sufficient sales for the “proof-of-concept” to be judged a success.  Such tactics are not unusual in commerce and Ford was responding to the Holden’s earlier release of the SS being timed deliberately to steal the thunder expected to be generated by the debut of the Falcon Hardtop.  Despite the SS in 1972 being so successful a second batch was needed to meet demand, for some reason GMH (General Motors Holden's) decided that when added as a regular-production model, it would use the "Monaro GTS" name which, since 1968, had been used exclusively of two-door hardtop coupés.  So, despite Chevrolet in the US having for a decade built an enviable "brand recognition" for the SS badge and the success of its own SS in 1972, Holden opted not to take advantage of the new model inheriting the aura and instead diluted the value of the Monaro brand.  Even at the time it seemed a strange choice and tellingly, within a few years, after production of the Monaro coupés ended, the four door models were renamed simply "GTS".       

1973 Ford XA Falcon GT Superbird with model in ankle-length, sleeveless floral sheath maxi dress.  The model was Jill Goodall who in the 1970s appeared on the covers of Australian fashion magazines and in television & print advertising.  She worked also as an actor, including a role as a “harem girl” in the James Bond film The Spy Who Loved Me (1977).

Although it featured a new wool fabric (described in the press-kit as a "rough-blend") for the upholstery and a power-steering system with the rim-effort increased from 4 to 8 lbs (1.8 to 3.6 kg), mechanically, the Superbird show car was something of a “parts-bin special” in that it differed from a standard GT Hardtop mostly in the use of some of the components orphaned when the run of 250-odd (Phase 4) Falcon GTHOs in 1972 was cancelled after a Sydney tabloid newspaper had stirred a moral panic with one of their typically squalid and untruthful stories about the “160 mph [258 km/h] supercars” which soon would be sold to males aged 17-25 (always a suspect demographic in the eyes of a tabloid editor).  Apparently, it was a “slow news day” so the story got moved from the sports section at the back to the front page where the headline spooked the politicians who demanded manufacturers not proceed with the limited-production specials which existed only to satisfy the homologation rules for competition.  Resisting for only a few days, the manufacturers complied and within a week the nation’s regulatory body for motor sport announced the end of “series-production” racing; subsequently, the "production" cars used on the track would no longer need to be so closely related to those available in showrooms.

Ms Goodall with 1973 Ford XA Falcon GT Superbird.  The XA Hardtop's styling motifs were borrowed from the second generation Ford (US) Torino (1970-1971), a machine which, like the 1968 Dodge Charger, looked slippery but, when used at speed on the ovals, was found to induce rather more drag than had been hoped.  Although one German race-driver noted some "chassis flex" in the pillarless coupé, the Australian car's aerodynamics proved sound and the cars were stable on the circuits.  Contemporary tests of the road cars noted the XA GT Hardtop's top speed being some 8 mph (13 km/h) higher than an identically configured sedan, the gain attributed to (1) the reduced frontal area (the hardtop's roofline 2 inches (50 mm) than the sedan) and (2) the efficiency of the air flow over and around the rear section.  

The Falcon GT Superbird displayed at the motor shows in 1973 was a harbinger in that it proved something a “trial run” for future ventures in which parts intended solely for racing would be added to a sufficient number of vehicles sold (almost surreptitiously) to the public to homologate them for use on the circuits.  In that sense, the mechanical specification of the Superbird previewed some of what would later in the year be supplied (with a surprising amount of car-to-car variability) in RPO83 (regular production option 83) including many of the settings and parts intended for the 1972 GTHO (the genuine homologation model which would have been produced in a batch of 300-odd) such the suspension rates, a 780 cfm (cubic feet per minute) carburetor, the 15” x 7” aluminium wheels, a 36 (imperial) gallon (164 litre) fuel tank and various bits and pieces designed for greater durability under extreme (ie race track) conditions.  Cognizant of the effect the tabloid press has on politicians, none of the special runs in the immediate aftermath of the 1972 moral panic included anything which much increased performance.  However, while the details of the mechanical specification delighted the nerds, it was the large orange Superbird logo on the flanks which attracted most comment, the press-kit handed to journalists mentioning the "unique black shadows" which "highlighted its appearance".  However, although nicely done, the black shadows professionally were hand-painted and not included in the full-sized decal which became available from Ford dealers in white (part-number XA-19C 600), black (XA-19C 600 B) & orange (XA-19C 600 C) at Aus$59 which may sound reasonable but the ABS (Australian Bureau of Statistics) reports that in the March quarter, 1973, average MFTWE (male full-time weekly earnings) were Aus$102.50.  Demand for the decal in any color was subdued and it was not long available.

Toned down: 1973 Ford Falcon 500 Hardtop with RPO77 (Superbird option pack) in Polar White with Cosmic Blue accents over white vinyl.

Most who saw the Superbird probably didn’t much dwell on the mechanical intricacies, taken more by the stylized falcon which extended three-quarters the length of the car.  It was the graphic which no doubt generated publicity in a way the specification sheet never could and as an "adhesive transparancy" it could be ordered from Ford dealers but so low was the take-up rate it was decided instead to capitalize on the success of the show car by releasing a production Superbird (RPO77) with the graphic's length scaled down to a mere 18 inches (450 mm), applied to the rear quarters with an even smaller version on the glovebox lid.  In keeping with that restraint, RPO77 included only “dress-up” items and a 302 cubic inch (4.9 litre) V8 in the same mild-mannered state of tune as the versions sold to bank managers and such.  It was a much more modest machine than the Melbourne Motor Show car with its high-compression 351 (5.8) V8 so although not quite a "budgerigar in a birdcage next to a hunting falcon", the messages conveyed by the respective avian graphics were in accord with the hardware.

1973 Ford XA Falcon Superbird in the Lime Glaze & Jewell Green combo over black vinyl.  The other available color combinations were Polar white / Cosmic Blue and Yellow Fire / Walnut Glow.

Still, as a package which offered a bundle of options at an substantial discount (nominally about 11%), RPO77's cost breakdown attracted buyers and did succeed in stimulating interest in the two-door Hardtop, sales of which had proved sluggish after the initial spike in 1972.  It seems of the 750 planned, some 700 were built and that all but 200 were fitted with an automatic transmission was an indication of the target market.  In Australia, the surviving Superbirds are now advertised for six figure (Aus$) sums while the surviving three Phase 4 GTHOs (the fourth was destroyed in a rally which sounds and improbable but it was said to have been competitive, only the sheer weight of the thing meaning the tyre's sidewalls were subject to frequent failure) command over a million.

A (sort of) Superbird at speed.

Murray Carter (b 1931), Falcon RPO83 XA GT Hardtop (modified to resemble the then current XB GT, a common practice in the era), Oran Park round of the 1975 ATCC (Australian Touring Car Championship) 27 April, 1975.  The “Superbird” finished third in the race and second in the 1975 championship.  There was much production-line standardization between the XA-XB-XC Hardtops (more so than the sedans and station wagons which used different rear doors) so the visual updating wasn't difficult and the car would later receive XC panels before being stripped of anything useful and scrapped, race teams then an unsentimental crew.

Although RPO77 was purely an “appearance package”, the Superbird was a footnote in the homologation of the hardtop body for racing, Ford using the specification sheet provided to state motor vehicle registration authorities in their submission to CAMS (Confederation of Australian Motorsport, then the national regulatory body for the sport).  The advantages in citing the Superbird as a base were (1) being built between March-May, 1973 the structure benefited from the changes to the rails and braces which didn’t appear on the earlier cars and (2) at 2910 lb (1320 KG), it was up to 210 lb (95 KG) lighter (depending on configuration) than the Falcon GT Hardtops which were basis of the vehicles actually used in racing.  Whether CAMS was deceived or was just anxious to accommodate isn’t clear but the certification was granted with the designation “Superbird” appearing in their published documentation.  That’s why it was common in press reports at the time for the racing RPO83 XA Hardtops to be referred to as “Superbirds” even though not one was based on a RPO77 Falcon.  Despite all that, the race cars were on occasions seen with “Superbird” emblazoned in bold type.  

The original Superbird, unused image from a publicity photo session, Melbourne, 1973.  Built in August 1972, the Superbird was painted "Pearl Silver" and road-registered (LHA 614) in Victoria.  It was re-painted in its original "Wild Violet" before being sold (without the graphic).

As a nerdy footnote, the 302 V8 used in the RPO77 Superbirds was exclusive to Australia in being based on the Cleveland (335) engine which in the US was the basis only for 351 and 400 (6.6) versions.  The rationale for the Australians developing their unique "302 Cleveland" was one of production-line standardization, the local operation having never produced the Windsor line of V8s which by 1969 provided the US market with both 302 & 351 versions.  According to the convention in use at the time, the Australian engines could have been dubbed "302 Geelong" & "351 Geelong" (Geelong the city where the Ford foundry was located) but that was never adopted and both tend to be called "Australian Clevelands".  Creating the 302 Cleveland wasn't challenging or expensive and both the Australian engines were (with detail differences between them) a single-configuration compromise optimized for use on the street, eschewing use of the components which delivered improved top-end power (as fitted to some of the US engines) which worked well at high speed but was not ideal for street use where a progressive curve of low and mid-range torque is the most desired characteristic.

For the Superbird photo-shoot, as well as the floral maxi, Ms Goodall also donned some dresses with a shorter cut.  She had studied graphic design in Melbourne and after retiring from modelling, worked as a studio manager and photographer.  Now based in Germany and known professionally as Jill Seer, she has exhibited her work in European galleries.

What the Australian engineers did for their 351 was was combine the large (61-64 cm³) combustion chambers from the US "4V" heads (ie "4 venturi" indicating their use with a four barrel carburetor) with the smaller "2V" intake ports, the arrangement producing a good quench and air/fuel swirl through the ports, enhancing the low-to-mid range torque output.  The short-stroke Australian 302 was different in that it used a 56.4–59.4 cm³ combustion chamber in conjunction with the high-swirl, small ports.  That combination ("closed" combustion chamber & small ports) turned out to be a "sweet-spot" for street use which has made the Australian 302 heads a popular item for those in the US modifying 351s, the swap made possible by the shared bore and bolt pattern.  While in "heavy duty" use the Cleveland (335) suffered from fundamental flaws (excessive weight and limited lubrication channels), the canted-valve heads were right from day one, the reason why the 1969 Boss 302 (which put efficient Cleveland heads on the lighter, well-oiled Windsor block) was so highly regarded.  Although its sounds oxymoronic, Ford Australia really did market its 302 as "an economy V8" but that phrase needs to be read as something comparative rather than absolute, both the 302 & 351 even then regarded as "thirsty".