Futtock (pronounced fuht-uhk)
In nautical design and construction, any of a number of curved
(and otherwise shaped) timbers forming the lower, more curved portion of the
frame in a wooden hull; one of the ribs in the frame of a wooden vessel.
1605-1615: From the Middle English futtek & votek, of
uncertain origin but possibly a compound of the Old English fōt + hōc, or fut + -uc (analysed
as foot-hook or footock (“-ock” the diminutive suffix)) or a construct of the
Old Dutch vot or fuot + hoek, or from buttock
(from the jargon of timber merchants, the construct being butt (in the sense of
a cut of timber) + -ock.
Alternatively it may have been influenced by the Middle Dutch voetkijn, diminutive of voet (foot), the construct deconstructed
as foot + -kin. The words
in Old English from which the Middle English forms emerged may have been from
the Old Norse construct fótr or fett & futt (big) + ek (timbr),
or øks which gave the Old Norse fót'ek, futtek or futtøks, the
Norwegian equivalent Norwegian being fot
haki, fett eik (tømmer), or fett øks;
meaning foot hook, big oak (timber) , or bold axe. Futtock is a noun; the noun plural is
futtocks.
One theory with much support is it was simply the Old English fōtuc (foot) + -ock. Many boatbuilders seem convinced the origin of futtock must obviously have been an alteration of foothook (the ribs in a boat frame one could use to “hook one’s foot under for stability while on board”. Those with experience of standing in small craft while in rough waters will likely also support this etymology and similarly formed words include baloney from bologna, and cockamamie (originally “a decal, a design that can be transferred to a surface” and later re-purposed to mean something or someone ridiculous or absurd) from decalcomania. (from the French décalcomanie (process of transferring designs onto surfaces using decals) although cockamamie was once suggested to have a Yiddish connection on the basis of a vague similarity to certain words in the Jewish vernacular; the idea has long been discredited.
The sequence: Although modular systems now exist, historically, frames were built from the floor up, the second and subsequent futtocks added after each lower unit was secured.
Futtocks are the separate pieces of timber which form a frame (the
rib-like structure) in a wooden ship and historically there are usually three
or four (there can be five) futtocks to a rib in a ship of moderate size. Futtocks are solid pieces of compass timber
several of which make up a built frame, extending from the floor to the top timber.
The one closest to the keel is known is
the ground futtock or naval futtock, the remainder being the “upper”
futtocks while futtock riders are the large, vertical timbers strengthening the
inside of the hull below the waterline. A
bilge futtock is a specialized form
of frame futtock which covers the
sweep of the bilge. In a wooden vessel,
a floor futtock is the lowest of the
futtocks from which a built frame is made, running transversely across the top
of the hog and through which the keel bolts are fitted (the outer ends often of
differing lengths and are known as “wrung heads” or “wring heads”). Sistered Frames are frames constructed by paired
futtocks laid side by side and cross bolted together with the butts between the
various futtocks staggered. The
cross-bolting was to enhance structural stability and was required because vessels
are subject to both lateral and longitudinal stresses; recognition of this was
the reason internal combustion engine builders in the 1960s began using
cross-bolting to secure the main-bearing caps supporting the crankshaft.
Cross-bolting describes the placement of bolts at angles (ie essentially vertical vs horizontal although futtocks being inherently curved pieces, bolts are often installed at angles which follow the curve). What the cross-bolting does is better absorb and distribute stresses which in a vessel can be both and lateral and longitudinal. Note that depending on the hull profile desired, some futtocks can actually be straight.
Spirket blocks (also called spirket chocks) were “filling
chocks” fitted (1) between the floor futtocks and (2) the top of the hog and
the underside of the keelson; usually spirket blocks were dovetailed into the
floor futtocks but this method of construction is long obsolete. The general name usually given to the pieces
of timber which compose the frame of a ship such as floor timbers, futtock
timbers and top timbers as also the stem or head timbers and the stern timbers
was (logically): “timbers”. Sometimes,
the carved, ornamental pieces upon the munions of stern windows in the stead of
pilasters were called stern timbers although such use is now less common. The timberhead is the top of the uppermost
frame futtock extending above the covering board to form a stiffener to the
bulwark and to which the berthing is attached. The cap rail or main rail is attached to its
tops by means of a mortise and tenon joint and depending on the builder or the
type of vessel, it could be a piece of timber separate from the frame. The top timber was the uppermost of the
futtocks in a built frame and which stops just below the underside of the
covering board (except in sistered frames when one futtock is extended through
the deck to form the timberhead). The wrunghead
was the outer end of the floor futtocks in a built frame, a technique now
obsolete. When wrungheads were used, the
wrunghead wale was an especially thick piece of skin planking run over the
outer ends (ie the wrungheads) of the floor futtocks. A futtock band was fitted usually around a
mast and existed as a locating mechanism to which a futtock (or another fitting)
could be attached; such was their utility they were used for other purposes. Futtock
head is an unusual term in that it seems not to have been in use until the
1860s (although it’s so obvious it may have even then have been shipwright’s
slang). The futtock head described the
upper part of a futtock, that part which extends above the top of the frame and
is fastened to the ship's planking, its most vital function being to ensure the
strength of the structure.
It is futtocks which are the building blocks (more correctly spars) of the ribs which are part of a ship's frame and the components which give a vessel its distinctive shape. In anatomy, they can be compared with the ribcage of humans and many other animals. Lindsay Lohan on Melrose Avenue, Los Angeles, April 2009 (left) and a vessel during restoration (right) illustrate the similarities. This image of Lindsay Lohan (during her "thin" phase) has long been popular on thinspo and other pro-ana sites.
A futtock hole
is the opening in a frame through which the futtock is inserted and fastened to
the ship's planking. Futtock holes typically
are located at the top of the frame, the point at which the futtock head secured. Such are the possibilities “futtock hole”
offers that it must have been one of a shipyard’s more re-purposed terms. Futtock
lines are the lines used to measure the curvature of the futtock, the
purpose being to ensure the cut is properly shaped and fitted to the ship's
frame. Almost always, futtock lines are
made of rope or wire and are attached to the futtock at various points along
its length, the curvature determined by pulling the futtock lines taut and
measuring the distance between the points where the lines are attached. A futtock
staff is a wooden or metal rod, used to measure the curvature of a futtock
and fulfils the function of a template and whether a futtock staff or futtock
lines are used depends on things such as the size of the fittings and their accessibility. Futtock staffs are marked with measurements corresponding
to the desired curvature, enabling a shipwright to determine where alterations
are needed. During the measurement process,
a futtock staff is inserted into the futtock hole, the curvature determined by comparing
the position of the staff to the markings.
The somewhat misleadingly named futtock shroud is a rope or wire attached
to the futtock. It is not a locating
mechanism but is used to provide additional support and stability to the
futtock (a la the guy-wires used on land for radio masts and such) by limiting
or even preventing any shifting during a ship’s movements. Almost always, a shroud is attached to the
futtock at one end and to the ship's mast or another part of the rigging at the
other end. Usually, a shroud runs from
the futtock plates on the sides of the top, downwards and inwards to a futtock
band around the mast or directly to the lower shroud's futtock stave. The futtock
stave consists of a served piece of rope across and lashed to a lower
shroud, below the top and near the masthead. As a general principle (there were variations
and in some cases, complete departures), staves were attached at the same
distance below the top as the masthead is above the top, the purpose being to reinforce
the lower shroud where the futtock shrouds terminate.
A futtock plank is a piece of timber curved to fit the shape of a ship's
hull. Futtock planks provide additional
strength and support, required because the physics of such things mean the stresses
in the construction are multiplied at the point of attachment and they’re
attached in a series of layers, each fastened to the layer below it using nails
or screws. The layers often do more than
merely emulate a single thicker piece of because shipwrights can align with the
grain of the timbers running at right angles or even diagonally. A futtock
plate is a metal plate which connects the futtock to the frame; it provides
additional strength and simplifies installation, compared with using pure timber
construction. Usually made from steel high-strength
alloys, the plates are attached with bolts or marine coach screws.
