Appurtenance

Appurtenance (pronounced uh-pur-tn-uhns)

(1) Something subordinate to another, more important thing; adjunct; accessory.

(2) In property law, a minor right, interest or privilege, or improvement belonging to and passing with a principal property upon transfer of title.

(3) The apparatus or instruments of a trade, art or profession.

(4) In classical grammar, a modifier that is appended or prepended to another word to coin a new word that expresses belonging (obscure to the point it's used in this context only between consenting grammar Nazis).

1350-1400: From the Middle English appurtenance, from the Anglo-Norman appurtenance (right, privilege or possession subsidiary to a principal one (especially in law); a right, privilege, or "an improvement belonging to a property), from the twelfth century Old French apartenance & apertenance; present participle of apartenir (be related to), from the Late Latin appertinere (to pertain to, belong to), the construct being ad (to) + pertinere (belong; be the right of (and related to the Modern English pertain)), the ultimate root the Latin appertineō (I belong, I appertain).  In the late fourteenth century (in the plural appurtenances) it acquired the meaning "apparatus, gear; tools of the trade", used in the sense now "kit" is often applied.  The adjective appurtenant emerged also in the late fourteenth century in the sense of "belonging, incident, or pertaining to", from the Anglo-French apurtenant, from the Old French apartenant & apertenant, present participle of apartenir (be related to).  Appurtenance is a noun and appurtenant is a noun & adjective; the noun plural is appurtenances.

Even in the twenty-first century, the matter of what is or is not appurtenant to a property can end up in court.  Typically the cases involve certain things being removed from the property after the agreement to purchase was executed.  The case law on these matters document where sellers have removed things like rose bushes, curtains, a decorative letter-box, garden gnomes and wall-hung ceramic ducks.

There’s long been general understanding about the general meaning of appurtenance but, at the margins, there are always lawyers prepared to test the waters.  In Attorney General of Canada v Western Higbie ([1945] Supreme Court of Canada 385), Thibaudeau Rinfret (1879–1962; Chief Justice of Canada 1944-1954) proposed as a definition: “Things belonging to another thing as principal, and which pass as incident to the principal thing.”  The effect he suggested, world be “In general everything which is appendant or appurtenant to land will pass by any conveyance of the land itself, without being specified, and even without the use of the ordinary form with the appurtenances at the end of the description."  Rinfert CJ appeared to suggest the appendix of appurtenances appended usually to the form of transfer either need not exist or need not be wholly inclusive, the implication being it could be used as a place to list those items not thought appurtenances, although, given even his helpful definition didn’t descend to specifics, lengthy appendices might still be expected.

Lindsay Lohan photographed by Life & Style magazine "at home" during one of her court-ordered stays "at home", June 2011.

In this photograph, of that which is "easily" removable, probably only the downlight, stair-rail and electrical switches would be thought appurtenant to the property whereas the the painting, furniture & items on the shelves (as "mere chattels") would not.  Light-fittings are a good example of how the distinction is drawn.  As a general principle, a light fitting is appurtenant if permanently installed and "wired into" the property's wiring system while a free-standing lamp which plugs into a wall-socket is not.  However, disputes can arrive and courts have had to decide, on the facts of each case, if a chandelier is appurtenant.  They've had to adjudicate too in instances where a property is sold "fully furnished" and might thus be called upon to rule on something like the fruit bowl.  Few would doubt the fruit would not be covered by the doctrine but, depending on the circumstances, the fruit bowl might be found so; it would depend on the facts of the case (representations made; photographs or videos in which "fully-furnished" was mentioned etc).  However, the doctrine of appurtenance need not be absolute and is subject at contract to agreement between the parties.  Provided the usual rules of contract are followed, (certainty of terms, lack of coercion etc) either within the documents of sale or as a collateral contract, buyer & seller can agree to exclude items which would usually be held appurtenant or explicitly include "mere chattels" on that basis.  Properly constructed, courts will enforce such contracts.

Montage

Montage (pronounced mon-tahzh (mawn-tazh in French))

(1) The technique of combining in a single composition, pictorial elements from various sources, as parts of different photographs or fragments of printing, either to give the illusion that the elements belonged together originally or to allow each element to retain its separate identity as a means of adding interest or meaning to the composition; the composition itself.

(2) By analogy, the creation of a thing or concept by combining a number of related elements; any combination of disparate elements that forms or is felt to form a unified whole.

(3) In photography, as photomontage, a juxtaposition or partial superimposition of several shots to form a single image.

(4) In film & television etc, a technique of editing used to present an idea or set of interconnected ideas.

1929: A borrowing from the French montage (assembly, set-up), the construct being mont(er) (to mount; to put up) + -age.  Monter was from the Vulgar Latin montāre, the present active infinitive of monto (to climb, mount, go up), from mōns & montem (mountain), from the primitive Indo-European men- (mountain).  The suffix -age was from the Middle English -age, from the Old French -age, from the Latin -āticum.  Cognates include the French -age, the Italian -aggio, the Portuguese -agem, the Spanish -aje & Romanian -aj.  It was used to form nouns (1) with the sense of collection or appurtenance, (2) indicating a process, action, or a result, (3) of a state or relationship, (4) indicating a place, (5) indicating a charge, toll, or fee, (6) indicating a rate & (7) of a unit of measure.  The French suffix -age was from the Middle & Old French -age, from the Latin -āticum, (greatly) extended from words like rivage and voyage.  It was used usually to form nouns with the sense of (1) "action or result of Xing" or (more rarely), "action related to X" or (2) "state of being (a or an) X".  A less common use was the formation of collective nouns.  Historically, there were many applications (family relationships, locations etc) but use has long tended to be restricted to the sense of "action of Xing".  Many older terms now have little to no connection with their most common modern uses, something particularly notable of those descended from actual Latin words (fromage, voyage etc).

A montage of Lindsay Lohan as Andy Warhol (1928–1987) might have rendered.

Montage, although now most associated with photography, painting and other static installations, was originally a term in cinematography, first attested in 1929.  The use was extended in 1931 (as photomontage) to the use of photographs or photographic negatives to make art or illustrations.  The technique can, in many fields, be used to add a veneer of intellectual gloss to what is really an elaborated form of plagiarism.  More helpfully, photomontages have been a vital aspect of the techniques of producing large scale imagery and the first were literally assembled on large tables by technicians armed with scissors, magnifying glasses and adhesive tape, the most prolific of the early adopters being the military who used the small images taken during photo-reconnaissance (PR) missions.  As camera technology improved, definition increased and more detail was captured but this was counted somewhat by increased anti-surveillance measures which forced the PR missions to operate at higher altitude.  Interestingly, the Allied military in World War II (1939-1945) found women much more efficient in both analysing PR and assembling montages.

A montage of Lindsay Lohan as Andy Warhol (1928–1987) might have rendered.

The techniques honed in wartime proved valuable in peacetime for creating large-scale maps and renderings from sometimes even thousands of small fragments.  This was the way big areas on the surface of the earth were able to be visualized as if a single photograph and in the 1950s work began on the task of mapping the ocean floor, something of interest not only oceanographers & nautical geographers but also to navies, commercial shipping companies and miners, the oil & gas industry long aware that vast untapped resources lay under the waves.  The concept of mapping the seabed is simple in that all that is required is to have the images in the form of a grid which could then be assembled in a single montage (the world’s biggest).  However, while the scale in terms of the surface area proved manageable, obtaining the data at depths in which pressures are immense and darkness total proved as challenging as predicted and although the maps are in a sense complete, the deepest parts of the oceans remain to some extent mysterious.  The available montages (which scientists call bathymetric data sets) include the GEBCO (General Bathymetric Chart of the Oceans which is an international project), Seabed 2030 (a collaborative project between GEBCO and the Japanese Nippon Foundation which plans to have a comprehensive map of the entire ocean floor by 2030), the EMODnet (European Marine Observation and Data Network which publishes highly detailed bathymetric maps for European waters) and the US NOAA (National Oceanic and Atmospheric Administration which offers maps of US waters and contributes to global programmes, their material available through the National Centers for Environmental Information (NCEI).

A montage of Lindsay Lohan as Andy Warhol (1928–1987) might have rendered.

The difference between collage and montage is that while a collage weaves together things of difference to create a unified whole, a montage uses complete things of some similarity to create something visually coherent although, with some modern artists, coherence can prove elusive, however cohesive a whole the glue might produce.  At the definitional margins however, the distinctions can be significant in the production but be undetectable in the result.  To create what appeared to be the montage of the seabed, what was done was technically a collage, the assembled components including photographs, renderings from ship-based sonar measurements and satellite altimetry as well as some enhancement in software.  However big might have been the ambition to create a unified montage of the ocean floor, cosmologists & astronomers thought bigger still and as space-based cameras and wandering craft became available, montages were assemble of objects such as the moon and the lovely rings of Saturn.  Aiming to produce the grandest montage of all is the European Space Agency which (ESA), using observations from their Euclid space mission (launched in July 2023) will explore dark matter and dark energy; over time billions of galaxies will be viewed.  What makes Euclid different from the Hubble Telescope and JWST (James Webb Space Telescope) is it can survey large parts of the sky at once, the agency describing the difference as between looking through a window compared with a keyhole.  In time, all the known objects in the universe might be photographed which will permit quite a montage but what really interests the cosmologists is the dark matter (which may actually be dark energy or a combination of the two) so it’s a quest for the known unknowns and unknown unknowns.

Leverage

Leverage (pronounced lev-rij, lev-er-ij or lee-ver-ij)

(1) The action of a lever, a rigid bar that pivots about one point and that is used to move an object at a second point by a force applied at a third.

(2) The mechanical advantage or power gained by using a lever.  A force compounded by means of a lever rotating around a pivot.

(3) The power or ability to act or to influence people, events, decisions etc, based on position, personality, reputation etc (an applied to both institutions & individuals); sway.

(4) In finance, the use of a small initial investment, credit, or borrowed funds to gain a very high return in relation to one's investment, to control a much larger investment, or to reduce one's own liability for any loss (in some places known also as “gearing” and often used to express the “debt to equity” ratio).

(5) To use (a quality or advantage) to obtain a desired effect or result:

(6) To provide with leverage.

(7) To invest or arrange (invested funds) using leverage.

(8) To exert power or influence on:

1724: The construct was lever + -age.  Lever (a rigid piece which is capable of turning about one point, or axis (the fulcrum), and in which are two or more other points where forces are applied (used for transmitting and modifying force and motion)) was from the Middle English lever, levore & levour, from the Old French leveor & leveur (a lifter, lever (also Old French and French levier)), from the Latin levātor (a lifter), from levō (to raise).  The suffix -age was from the Middle English -age, from the Old French -age, from the Latin -āticum.  Cognates include the French -age, the Italian -aggio, the Portuguese -agem, the Spanish -aje & Romanian -aj.  It was used to form nouns (1) with the sense of collection or appurtenance, (2) indicating a process, action, or a result, (3) of a state or relationship, (4) indicating a place, (5) indicating a charge, toll, or fee, (6) indicating a rate & (7) of a unit of measure.  Leverage is a noun & verb, leverage is a noun, leveraged & leveraging are verbs and leverageable is an adjective; the noun plural is leverages.

The original meaning was to describe the action of a lever, the meaning “the power or force of a lever” emerging in 1827 while the figurative sense of an “advantage for accomplishing a purpose” dates from 1858.  The use in financial matters seems first to have appeared in writing in 1933 and was a creation of US English, in use as a verb by at least 1956.  The synonyms and related terms when describing the physics of the mechanical effect include mechanical advantage, strength, multiplier effect & force multiplier; in the figurative sense the usual alternatives are clout, influence & pull.  In the world of limited liability companies, leveraged financial arrangements (such as the “leveraged buyout”) are so common that when the mechanism is not used, the adjectives non-leveraged & unleveraged often appear.  The word is so embedded in the slang of those in business where leveraged transactions are common that as a transitive verb, it’s commonly used generally to suggest “to use; to exploit; to manipulate in order to take full advantage of someone or something.  The word has also entered the language of international relations (though used more often by commentators than diplomats) to describe what is known casually as “hostage diplomacy”.  The taking of hostages for ransom or some other purpose is not new and has probably been practiced since human societies first interacted and many cases over the centuries have been documented but historically, the tactic was once blatantly admitted, the gangsterism unconcealed.  Now, states which use hostages for leverage usually gloss things with the pretence of legality, the hostage convicted of something and given a sentence disproportionately long and while none seem yet to have been sufficiently cynical to have used a charge of "unspecified offences" that may yet happen.  The leverage sought tends to be political (the release of prisoners held by the hostage’s country of origin or some other concession) and the expert practitioners are the usual suspects: the DPRK (Democratic People’s Republic of Korea (North Korea)), the PRC (People’s Republic of China) and the Russian Federation.

Lever porn: 1972 Mercedes-Benz Unimog w1416.  The multiple levers were required because of the many drive and gearing combinations available.  In vehicles of this type, this may be close to peak-lever because it's become common to use electronic controls for activation but the attraction of mechanical levers is their robust reliability and, for those who remember the way things used to be done, the tactility can be compelling.

The surname Lever is English and of Norman origin; it was a nickname for a fleet-footed or timid person, from the Old French levre (hare), from the Latin lepus (genitive leporis) although it’s not impossible that at least in some instances, it was a metonymic occupational name for a hunter or trapper of hares.  In some regions it may also have been a topographic name for someone who lived in a place thickly grown with rushes, the link the Old English lǣfer (rush, reed, iris).  Great & Little Lever in Greater Manchester are (collectively) named with this word and if there was a habitational origin to any names it would have come from such places.  Although rare in Germany, where Lever exists it is a descendent of the medieval personal names Lever (a variant of Liever and Levert, a variant of Lievert.  In Slovenia, it’s an altered form of Levar.  English cricketer John Lever (b 1949) between 1976-1986 played 21 tests, scoring 306 runs at an average of 11.76 and took 73 wickets with an average of 26.72, his best figures being 7/46, on debut in the first test against India at Deli in 1976.

Leverage began its life meaning “to use a lever or some similar tool to gain a mechanical advantage, typically in the context of lifting or moving heavy objects”, the idea generally thus one of “effective force multiplication”.  From here it came variously to be used figuratively, notably sine the 1930s in structured financial transactions.  Financial Leverage is the use of various financial instruments or borrowed capital to increase the potential return of an investment, the attraction the magnification of profit; the risk in increase in potential losses.  Social leverage is not new but it’s assumed a new significance in the age of social media because the proliferation of access afforded by the platforms has removed the “gatekeeper” role the legacy media once fulfilled and a presence, once established in one context can be leveraged into a position in other, lucrative fields.  Fame itself seemed to be enough: Lindsay Lohan’s forays into music and fashion might seem related to her career in film but wouldn’t appear obviously to be linked with her more recent activities promoting cryptocurrency.  That doesn’t matter because notoriety (for better or worse) is enough; her choice of a certain dress to wear to one of her many court appearances saw the garment sell-out within hours.  Nor is this multi-directional leverage a creature only of pop culture, a number of Nobel laureates wryly observing that having won the prize for their accomplishments is a certain branch of science, they end up on the “commentator lists” of media organizations and are asked for their thoughts on things hardly related to their field.

In the matter of Grand Theft Auto (GTA5): Lindsay Lohan v Take-Two Interactive Software Inc et al, New York Court of Appeals (No 24, pp1-11, 29 March 2018)

It’s of course routine for leverage to be weaponized but sometimes, there’s the suggestion the leverage of others can be appropriated and misused, the essence of many an ambush marketing campaign.  Lindsay Lohan in 2014 sued a software house, alleging one of the characters in the game Grand Theft Auto V (GTA5) was based on a likeness of her and thus an invasion of her privacy: “an attempt to leverage her public profile to boost sales of the latest instalment of the series”.  The game’s producers responded, labelling the suit a “publicity stunt” and in private discussions they may also have called it a cunning one.  It took an unremarkable four years from filing for the case to reach New York’s highest appellate court where it was dismissed, six judges of the Court of Appeals finding the “actress/singer” in GTA5 merely resembled a “generic young woman” rather than anyone specific.  Concurring with the 2016 ruling of the New York County Supreme Court which, on appeal, also found for the game’s makers, the judges, as a point of law, accepted the claim a computer game’s character “could be construed a portrait”, which “could constitute an invasion of an individual’s privacy” but, on the facts of the case, the likeness was “not sufficiently strong”.  The “… artistic renderings are an indistinct, satirical representation of the style, look and persona of a modern, beach-going young woman... that is not recognizable as the plaintiff” the judgment read.  Ms Lohan’s lawyers did not seek leave to appeal.

Quartervent

Quartervent (pronounced kwawr-ter-vent)

A small, pivoted, framed (or semi-framed) pane in the front or rear side-windows of a car, provided to optimize ventilation.

1930s: The construct was quarter + vent.  Dating from the late thirteenth century, the noun quarter (in its numerical sense) was from the Middle English quarter, from the Anglo-Norman quarter, from the Old French quartier, from the Latin quartarius (a Roman unit of liquid measure equivalent to about 0.14 litre).  Quartus was from the primitive Indo-European kweturtos (four) (from which the Ancient Greek gained τέταρτος (tétartos), the Sanskrit चतुर्थ (caturtha), the Proto-Balto-Slavic ketwirtas and the Proto-Germanic fedurþô).  It was cognate to quadrus (square), drawn from the sense of “four-sided”.  The Latin suffix –arius was from the earlier -ās-(i)jo- , the construct being -āso- (from the primitive Indo-European -ehso- (which may be compared with the Hittite appurtenance suffix -ašša-) + the relational adjectival suffix -yós (belonging to).  The suffix (the feminine –āria, the neuter -ārium) was a first/second-declension suffix used to form adjectives from nouns or numerals.  The nominative neuter form – ārium (when appended to nouns), formed derivative nouns denoting a “place where stuff was kept”.  The Middle English verb quarteren, was derivative of the noun.  Dating from the mid fourteenth century, vent was from the Middle English verb venten (to furnish (a vessel) with a vent), a shortened form of the Old French esventer (the construct being es- + -venter), a verbal derivative of vent, from the Latin ventus (wind), in later use derivative of the English noun.  The English noun was derived partly from the French vent, partly by a shortening of French évent (from the Old French esvent, a derivative of esventer) and partly from the English verb.  The hyphenated form quarter-vent is also used and may be preferable.  Quarter-vent is a noun; the noun plural is quarter-vents.  In use, the action of using the function provided by a quarter-vent obviously can be described with terms like quarter-venting or quarter-vented but no derived forms are recognized as standard.

1959 Cadillac Eldorado Biarritz.

Like almost all US passenger cars, the post-war Cadillacs all had quarter-vents (“vent windows” or “ventiplanes” to the Americans) and on the most expensive in the range they were controlled by an electric motor, a feature optional on the lesser models.  This was a time when the company's slogan “Standard of the World” really could be taken seriously.  In 1969, with General Motors (GM) phasing in flow-through ventilation, Cadillac deleted the quarter-vents, meaning purchasers no longer had to decide whether to pay the additional cost to have them electrically-activated (a US$71.60 option on the 1968 Calais and De Ville).  GM's early implementation of flow-through ventilation was patchy so the change was probably premature but by 1969 the system was perfected and as good as their air-conditioning (A-C), famous since the 1950s for its icy blast.    

The now close to extinct quarter-vents were small, pivoted, framed (or semi-framed) panes of glass installed in the front or rear side windows of a car or truck; their purpose was to provide occupants with a source of ventilation, using the air-flow of the vehicle while in motion.  The system had all the attributes of other admirable technologies (such as the pencil) in that it was cheap to produce, simple to use, reliable and effective in its intended purpose.  Although not a complex concept, GM in 1932 couldn’t resist giving the things an impressively long name, calling them “No Draft Individually Controlled Ventilation” (NDICV being one of history’s less mnemonic initializations).  GM’s marketing types must have prevailed because eventually the snappier “ventiplanes” was adopted, the same process of rationality which overtook Chrysler in 1969 when the public decided “shaker” was a punchier name for their rather sexy scoop which, attached directly to the induction system and, protruding through a carefully shape lacuna in the hood (bonnet), shook with the engine, delighting the males aged 17-39 to whom it was intended to appeal.  “Shaker” supplanted Chrysler’s original “Incredible Quivering Exposed Cold Air Grabber” (IQECAG another dud); sometimes less is more.  Adolf Hitler (1889-1945; Führer (leader) and German head of government 1933-1945 & head of state 1934-1945) suggested a good title for his book might be Viereinhalb Jahre [des Kampfes] gegen Lüge, Dummheit und Feigheit (Four and a Half Years of Struggle against Lies, Stupidity and Cowardice) but his publisher thought that a bit ponderous and preferred the more succinct Mein Kampf: Eine Abrechnung (My Struggle: A Reckoning) and for publication even that was clipped to Mein Kampf.  Unfortunately, the revised title was the best thing about it, the style and contents truly ghastly and it's long and repetitious, the ideas within able easily to be reduced to a few dozen pages (some suggest fewer but the historical examples cited for context do require some space).

The baroque meets mid-century modernism: 1954 Hudson Italia by Carrozzeria Touring.  

Given how well the things worked, there’s long been some regret at their demise, a process which began in the 1960s with the development of “through-flow ventilation”, the earliest implementation of which seems to have appeared in the Hudson Italia (1954-1955), an exclusive, two-door coupé co-developed by Hudson in Detroit and the Milan-based Italian coachbuilder Carrozzeria Touring.  Although some of the styling gimmicks perhaps haven’t aged well, the package was more restrained than some extravagances of the era and fundamentally, the lines were well-balanced and elegant.  Unfortunately the mechanical underpinnings were uninspiring and the trans-Atlantic production process (even though Italian unit-labor costs were lower than in the US, Touring’s methods were labor-intensive) involved two-way shipping (the platforms sent to Milan for bodies and then returned to the US) so the Italia was uncompetitively expensive: at a time when the bigger and more capable Cadillac Coupe de Ville listed at US$3,995, the Italia was offered for US$4,800 and while it certainly had exclusivity, it was a time when there was still a magic attached to the Cadillac name and of the planned run of 50, only 26 Italias were produced (including the prototype).  Of those, 21 are known still to exist and they’re a fixture at concours d’élégance (a sort of car show for the rich, the term an un-adapted borrowing from the French (literally “competition of elegance”) and the auction circuit where they’re exchanged between collectors for several hundred-thousand dollars per sale.  Although a commercial failure (and the Hudson name would soon disappear), the Italia does enjoy the footnote of being the first production car equipped with what came to be understood as “flow-through ventilation”, provided with a cowl air intake and extraction grooves at the top of the rear windows, the company claiming the air inside an Italia changed completely every ten minutes.  For the quarter-vent, flow-through ventilation was a death-knell although some lingered on until the effective standardization of A-C proved the final nail in the coffin.

1965 Ford Cortina GT with eyeball vents and quarter-vents.

The car which really legitimized flow-through ventilation was the first generation (1962-1966) of the Ford Cortina, produced over four generations (some claim it was five) by Ford’s UK subsidiary between 1962-1982).  When the revised model displayed at the Earls Court Motor Show in October 1964, something much emphasized was the new “Aeroflow”, Ford’s name for through-flow ventilation, the system implemented with “eyeball” vents on the dashboard and extractor vents on the rear pillars.  Eyeball vents probably are the best way to do through-flow ventilation but the accountants came to work out they were more expensive to install than the alternatives so less satisfactory devices came to be used.  Other manufacturers soon phased-in similar systems, many coining their own marketing trademarks including “Silent-Flow-Ventilation”, “Astro-Ventilation” and the inevitable “Flow-thru ventilation”.  For the Cortina, Ford took a “belt & braces” approach to ventilation, retaining the quarter-vents even after the “eyeballs” were added, apparently because (1) the costs of re-tooling to using a single pane for the window was actually higher than continuing to use the quarter-vents, (2) it wasn’t clear if there would be general public acceptance of their deletion and (3) smoking rates were still high and drivers were known to like being able to flick the ash out via the quarter-vent (and, more regrettably, the butts too).  Before long, the designers found a way economically to replace the quarter-vents with “quarter-panes” or “quarter-lights” (a fixed piece of glass with no opening mechanism) so early Cortinas were built with both although in markets where temperatures tended to be higher (notable South Africa and Australia), the hinged quarter-vents remained standard equipment.  When the Mark III Cortina (TC, 1970-1976) was released, the separate panes in any form were deleted and the side glass was a single pane.

Fluid dynamics in action: GM's Astro-Ventilation.

So logically a “quarter-vent” would describe a device with a hinge so it could be opened to provide ventilation while a “quarter-pane”, “quarter-light” or “quarter-glass” would be something in the same shape but unhinged and thus fixed.  It didn’t work out that way and the terms tended to be used interchangeably (though presumably “quarter-vent” was most applied to those with the functionality.  However, the mere existence of the fixed panes does raise the question of why they exist at all.  In the case or rear doors, they were sometimes a necessity because the shape of the door was dictated by the intrusion of the wheel arch and adding a quarter-pane was the only way to ensure the window could completely be wound down.  With the front doors, the economics were sometimes compelling, especially in cases when the opening vents were optional but there were also instances where the door’s internal mechanisms (the door opening & window-winding hardware) were so bulky the only way to make stuff was to reduce the size of the window.  In some cases, manufacturers "solved" the problem by making rear side glass fixed which lowered their costs but it was never popular with customers.

1976 Volkswagen Passat B1 (1973-1980 (1988 in Brazil)) without quarter-vents, the front & rear quarter-panes fixed.

The proliferation of terms could have come in handy if the industry had decided to standardize and the first generation Volkswagen Passat (1973-1980) was illustrative of how they might been used.  The early Passats were then unusual in that the four-door versions had five separate pieces of side glass and, reading from left-to-right, they could have been classified thus: (1) a front quarter-pane, (2) a front side-window, (3) a rear side-window, (4) a rear quarter-pane and (5) a quarter-window.  The Passat was one of those vehicles which used the quarter-panes as an engineering necessity to permit the rear side-window fully to be lowered.  However the industry didn’t standardize and in the pre-television (and certainly pre-internet) age when language tended to evolve with greater regional variation, not even quarter-glass, quarter-vent, quarter-window & quarter-pane were enough and the things were known variously also as a “fly window”, “valence window”, “triangle window” and (possibly annoying architects) “auto-transom”, the hyphen used and not.

1960 Bentley S2 Continental Flying Spur by H.J. Mulliner (Design 7508 with Van Gerbig rear quarter-windows, left), the "Van Gerbig" quarter-window (centre) and the Flying Spur's (Six Light) standard rear quarter pane (right).

In 1960, cars with rear quarter windows which pivoted open were not uncommon so it may seem strange such a fitting can attract comment.  However, much prized in the rarefied world of coach-built Rolls-Royces and Bentleys are the little quirks and oddities which can make the bespoke creations “even more unique” (a phrase which will annoy the grammar Nazis but in this context it’s handy verbal shorthand).  H.J. Mulliner bodied an estimated 125 Bentley S2 chassis with the Flying Spur four-door sports saloon coachwork (Design 7508 “Six Light” saloon) but only three were fitted with the “Van Gerbig-style pop-open rear quarter lights (following Design 6110)”.  Of the three “Van Gerbig Flying Spurs” two were built with LHD (left hand drive) and one was RHD (right hand drive).  The otherwise unexceptional quarter-vents gained the name from Peter Van Gerbig (b 1934), a New York socialite who specified the feature in a Flying Spur he ordered for US delivery.

PA Vauxhall Velox (1957-1962): 1959 (left) and 1960 (right).  The one-piece rear window was introduced as a running-change in late 1959.

Before flow-through ventilation systems and long before A-C became ubiquitous, quarter-vents were the industry standard for providing airflow to car interiors and it was common for them to be fitted on both front and rear-doors and frequently, the rear units were fixed quarter-panes (the lowering of the side window thing).  A special type of fixed quarter-pane were those used with rear windows, originally an economic imperative because initially it was too expensive to fabricate one piece glass to suit the “wrap-around styles becoming popular.  Improved manufacturing techniques let the US industry by the early 1950s overcome the limitations but elsewhere, the multi-piece fittings would continue to be used for more than a decade.

1957 Mercury Turnpike Cruiser (left), details of the apparatuses above the windscreen (centre) and the Breezeaway rear window lowered (right)

The 1957 Mercury Turnpike Cruiser was notable for (1) the truly memorable model name, (2) introducing the “Breezeway" rear window which could be lowered and (3) having a truly bizarre arrangement of “features” above the windscreen.  Unfortunately, the pair of “radio aerials” protruding from the pods at the top of the Mercury’s A-pillars were a mere affectation, a “jet-age” motif decorating what were actually air-intakes.

Brochure for 1957 Mercury Turnpike Cruiser promoting, inter-alia, the Breezeway retractable rear window.

A three-piece construction was however adopted as part of the engineering for the “Breezeway”, a retractable rear window introduced in 1957 on the Mercury Turnpike Cruiser.  It was at the time novel and generated a lot of publicity but the concept would have been familiar to those driving many roadsters and other convertibles which had “zip-out” rear Perspex screens, allowing soft-top to remain erected while the rear was open.  Combined with the car’s quarter-vents, what this did was create the same fluid dynamics as flow-through ventilation.  The way Mercury made the retractable glass work was to section the window in a centre flat section (some 80% of the total width), flanked by a pair of fixed quarter-panes.  After the run in 1957-1959, it was resurrected for use on certain Mercury Montclairs, Montereys and Park Lanes.

1958 (Lincoln) Continental Mark III Convertible (with Breezeway window).  The platform was unitary (ie no traditional chassis) which with modern techniques easily was achievable on the sedans and coupes but the convertible required so much additional strengthening (often achieved by welding-in angle iron) that a Mark III Convertible, fueled and with four occupants, weighed in excess of 6000 lb (2720 kg). 

Ford must have been much taken with the feature because it appeared also on the gargantuan “Mark” versions of the (Lincoln) Continentals 1958, 1959 & 1960, dubbed respectively Mark III, IV, & V, designations Ford shamelessly would begin to recycle in 1969 because the corporation wanted the new Mark III to be associated with the old, classic Continental Mark II (1956-1957) rather than the succeeding bloated trio.  The “Breezeway” Lincolns also featured a reverse-slanted rear window, something which would spread not only to the Mercurys of the 1960s but also the English Ford Anglia (105E, 1959-1968) and Consul Classic (1961-1963) although only the US cars ever had the retractable glass.  The severe roofline was used even on the convertible Continentals, made possible by them sharing the rear window mechanism used on the sedan & couple, modified only to the extent of being retractable into a rear compartment.

1974 Lincoln Continental Town Car with mini vents.

In the 1970s Lincoln introduced the novelty of “mini-vents” which raised and lowered separately from the main side-glass.  Smoking was at the time socially acceptable (in some circles it must have appeared obligatory) and there was a lot of it about so engineers devoting time to finding a better way for those wanting to “flick ash out the window” while running the A-C wasn’t surprising.  Those visualizing a “flick” in process might be surprised such a thing existed because if in a modern vehicle, its shape honed in wind-tunnels and computer simulations, what would likely happen would be “blowback”.  That’s because the shape is aerodynamically efficient (with a “buffer zone” very close to the surface) and disrupting that by lowering a window shifts the inside pressure from positive to negative, ask thus being “sucked-in”.  However, on something like a 1974 Lincoln Continental (which conceptually can be imagined as one brick sitting atop two), the buffer zone can (depending on speed) extend as as much as 3 feet (close to a metre) from the body.  The meant ash was flicked into the “buffer zone” and it didn’t end up back in the cabin.  The vents didn’t last (another casualty of the quest for lower drag) but as late as 1985 they appeared as a US$72 extra and were known in the industry as the “smoker's option”.

1967 Chevrolet Camaro 327 Convertible with vent windows (left), 1969 Chevrolet Camaro ZL1 without vent windows (centre) and Lindsay Lohan (b 1986) & Jamie Lee Curtis (b 1958) in 1969 Chevrolet Camaro Convertible during filming of the remake of Freaky Friday (2003), Los Angeles, August 2024.  Freakier Friday is slated for release in August, 2025).

Through Chevrolet's COPO (Central Office Production Order) system, 69 1969 Camaros were built with the ZL1, an all-aluminum version of the 427 cubic inch (7.0 litre) big-block V8.  The COPO had been established as an efficient way to coordinate the production of fleet orders (law enforcement agencies, utility companies etc) for runs of vehicles in a certain specification but the drag racing community and others worked out it could be used also as “back-door” way to order small runs of cars with otherwise unavailable high-performance engines.  The Freakier Friday Camaro (badged as a 396 SS but several were used during filming including at least one with a roll-over bar for the stunt work) lacks the vent windows which were deleted from the range after 1967 when “Astro-Ventilation” (GM’s name for flow-through ventilation) was added.  In North American use, the devices typically are referred to as “vent windows” while a “quarter light” is a small lamp mounted (in pairs) in the lower section of the front bodywork and a “quarter-vent” is some sort of (real or fake) vent installed somewhere on the quarter panels.  As flow-through ventilation became standardized and A-C installation rates rose, Detroit abandoned the quarter-vent which pleased industry because it eliminated both parts and labor, lowering the cost of production (the savings absorbed as profits rather than being passed to the customers).  On the small, cheap Ford Pinto (1971-1980), removing the feature saved a reported US$2.16 per unit but, being small and cheap, A-C rarely was ordered by Pinto buyers which was probably a good thing because, laboring under the 1970s burdens of emission controls, the weight of  impact-resistant bumper bars and often an automatic transmission a Pinto was lethargic enough with out adding power-sapping A-C compressor and plumbing.  Responding (after some years of high inflation) to dealer feedback about enquires from Pinto customers indicating a interest in the return of vents, Fords cost-accountants calculated the unit cost of the restoration would be some US$17.

1961 Maserati 3500 GTi with single (front) quarter-vent.

With the coming of flow-through ventilation and in increasing up-take of air conditioning, the US manufacturers welcomed being able to eliminate quarter-vents because it meant fewer parts, less material and some minutes of labor saved during assembly.  The process also worked the other way which resulted in some Maserati 3500 GTs (Tipo 101, 1957-1964) being a rare example of a car with front and rear quarter-vents fitted to the same door.  Between 1947-1956, Maserati had sold various versions of its A6 as road cars but, with a design based on the principles used in racing as well as many components from the competition department, none were ideally suited to volume (or even series) production.  Noting the success Ferrari was enjoying with the road-going variants of their 250 series sports cars, Maserati resolved to emulate the business model and developed a platform which was something of a “parts bin special”, components from many European manufacturers bought “off the shelf” as a way of lowering costs; in the usual manner of the low-volume Italian specialists in the post war-era, coachbuilders were asked to submit designs for the bodywork and ultimately, the contract was awarded to Carrozzeria Touring of Milan.  Like Ferrari, Maserati used a derivative of one of their racing engines and although the 3.5 litre (213 cubic inch) straight-6 neither looked or sounded as exotic as Ferrari’s charismatic V12s, it was a reliable, well-proven unit with power and torque characteristics better suited to a wide range of buyers (many of whom appreciated the ease with which the straight-6 could be serviced).  As a relic of its days in Formula One and sports car racing, Maserati did have a V12 but it was bulky and in output offered little more than the six, certainly for road use (Remarkably, the ancient V12, heavily revised, briefly would enjoy some success in 1966 when it was one of the few fully-developed engines available when the new 3.0 litre (183 cubic inch) rules took effect in Formula One).

1962 Maserati 3500 GTi with front & rear quarter-vents.

Almost all the 3500 coupés were bodied by Touring using their patented Superleggera (super light) technique of construction, the method involving the fabrication of a structural framework of small diameter steel tubes that conformed to the body shape, this skeletal frame then covered by an aluminium outer skin.  The result was something both light and rigid. In the late 1950s, the 3500 GT was the right car for the time and was company’s first truly successful road car, the profits from the model for the first time putting things on a stable financial footing; almost 2000 coupés and some 250 Spyders (roadster), mostly by Carrozzeria Vignale, leaving the factory between 1957-1964 and the memorable, bespoke 5000 GTs (1959-1966) were developed on the same platform with Maserati 5.0 litre (301 cubic inch) (the original “big bore” units later replaced by “long stroke” versions better suited to road use).  In 1959-1962, the 5000 GT was probably the fastest car on sale but was so expensive only 32 were built.

1962 Maserati 3500 GTi; the quarter-vents were opened and closed using knurled, stainless steel knobs.

The 3500 GT was however a design of its time and although in some ways mechanically advanced, was in other aspects little different from the way things were done in the 1930s, including the cabin ventilation, the extent of the sophistication being the ability to wind down the windows (power windows were standard on all but the earliest models).  So, in a 3500, things could get hot and stuffy and, in late 1961, the first were built with air-flow augmented by second, rear-mounted quarter-vent.  What that did was emulate exactly the fluid dynamics of flow-thru ventilation and the reason it was done that way was simple economics: to add a pair of quarter-vents was simple and cheap whereas the addition of an integrated flow-thru ventilation system would be demanding of time and resources and thus expensive.  In one review, it was reported such an upgrade would cost more than three times the budget the factory allocated for the introduction of Lucas mechanical fuel-injection to replace the triple Weber carburetors.  The engineers did implicitly acknowledge the second quarter-vent was an unhappy, if necessary, compromise, all subsequent Maseratis including an integrated flow-thru system.  

Ford Australia’s early advertising copy for the XA Falcon range included publicity shots both with and without the optional quarter-vents (left) although all sedans & station wagons had the non-opening, rear quarter-panes, fitted so the side window completely could be lowered.  One quirk of the campaign was the first shot released (right) of the “hero model” of the range (the Falcon GT) had the driver’s side quarter-vent airbrushed out (how “Photoshop jobs” used to be done), presumably because it was thought to clutter a well-composed picture.  Unfortunately, the artist neglected to defenestrate the one on the passenger’s side.

Released in Australia in March 1972, Ford’s XA Falcon was the first in the lineage to include through-flow ventilation, the previously standard quarter-vent windows moved to the option list as RPO (Regular Production Option) 86.  Because Australia often is a hot place (and now getting hotter) and many Falcons were bought by rural customers, Ford expected a high take-up rate of RPO 86 (it was a time when A-C was expensive and rarely ordered) so the vent window hardware was stockpiled in anticipation.  However, the new flow-through ventilation system was effective and the option didn’t prove popular but with a warehouse full of the parts, they remained available on the subsequent XB (1973-1976) and XC (1976-1979) Falcons although the take-up rate never rose, less the 1% of each range so equipped and when the XD (1979-1983) was introduced, there was no such option and this continued on all subsequent Falcons until Ford ceased production in Australia in 2016, by which time A-C had long been standard equipment.

Great moments in tabloid journalism: Sydney's Sun-Herald, Sunday 25 June, 1972.  The Sun-Herald was then part of the Fairfax group, proving Rupert Murdoch (b 1931) can't be blamed for everything.

The infrequency with which RPO 86 was ordered has been little noted by history but on one car the fixtures did become a element which enabled a owner to claim the coveted “one-of-one” status.  In August 1973, near the end of the XA’s run, with no fanfare, Ford built about 250 Falcons with RPO 83, a bundle which included many of the parts intended for use on the stillborn GTHO Phase IV, cancelled (after four had been built) in 1972 after a tabloid newspaper generated one of the moral panics of which they're so fond, this time about the “160 mph super cars” it was claimed the local manufacturers were about to unleash and sell to males ages 17-25.  Actually, none of them were quite that fast but not often has the tabloid press been too troubled by facts and the fuss spooked the politicians (it's seldom difficult to render a "minister horrified").  Under pressure, Holden cancelled the LJ Torana V8, Ford the GTHO Phase IV and Chrysler reconfigured it's E55 Charger 340 as a luxury coupé, available only with an automatic transmission and no high-performance modifications.

The “quarter-vent XA RPO 83 GT”: 1973 Ford Falcon XA GT sedan (Body Identification: 54H; Model Code: 18238) in Calypso Green (code J) with Onyx Black (code B) accents over Black Vinyl (Code B) with 351 4V V8 (Code T) and four-speed manual transmission (Code L).  It’s the only one produced with both RPO 83 (a (variably fitted) bundle of parts left-over from the aborted GTHO Phase IV project) and RPO 86 (front quarter-vent windows).  In the collector market they're referred to usually as “the RPO83 cars”.

So in 1973 Ford's warehouse still contained all the parts which were to be fitted to the GTHO Phase IV so they’d be homologated for competition and although the rules for racing had been changed to ensure there was no longer any need to produce small batches of “160 mph [257 km/h] super cars”, Ford still wanted to be able to use the heavy-duty bits and pieces in competition so quietly conjured up RPO 83 and fitted the bundle on the assembly line, most of the cars not earmarked for allocation to racing teams sold as “standard” Falcon GTs.  Actually, it’s more correct to say “bundles” because while in aggregate the number of the parts installed was sufficient to fulfil the demands of homologation, not all the RPO 83 GTs received all parts so what a buyer got really was “luck of the draw”; with nobody being charged extra for RPO 83, Ford didn’t pay too much attention to the details of the installations and many who purchased one had no idea the parts had been included, the manual choke's knob the only visually obvious clue.  Ford made no attempt to publicize the existence of RPO 83, lest the tabloids run another headline.  It’s certain 250 RPO 83 cars were built (130 four-door sedans & 120 two-door Hardtops) but some sources say the breakdown was 131 / 121 while others claim an addition nine sedans were completed.  Being a genuine RPO 83 car, the Calypso Green GT attracts a premium and while being only RPO 83 with quarter-vent windows is not of any great significance, it does permit the prized “one-of-one” claim and not even any of the four GTHO Phase IVs built (three of which survive) had them.  In the collector market, the “one-of-one” status can be worth a lot of money (such as a one-off convertible in a run of coupés) but a Falcon’s quarter-vents are only a curiosity.

The Bathurst 1000 winning RPO 83 Falcon GTs, 1973 (left) & 1974 (right).

All else being equal, what makes one RPO83 more desirable than another is if it was factory-fitted with all the option's notional inventory and most coveted are the ones with four-wheel disk brakes.  Because the project was focused on the annual endurance event at Bathurst's high-speed Mount Panorama circuit, the disks were as significant as an additional 50 horsepower and a few weeks before the RPO 83 run they'd already been fitted to the first batch of Landaus, which were Falcon Hardtops gorped-up (what bling used to be called) with hidden headlights, lashings of leather, faux woodgrain and a padded vinyl roof, all markers of distinction in the 1970s; unusually, there was also a 24 hour analogue clock.  Essentially a short wheelbase, two-door LTD (which structurally was a Falcon with the wheelbase stretched 10 inches (250 mm) to 121 (3075 mm)), the Landau was not intended for racetracks but because it shared a body shell and much of the running gear with the Falcon GT Hardtops, Ford claimed Landau production counted towards homologation of the rear disks.  Fearing that might be at least a moot point, a batch were installed also on some of the RPO 83 cars and duly the configuration appeared at Bathurst for the 1973 event, their presence of even greater significance because that was the year the country switched from using imperial measures to metric, prompting the race organizers to lengthen the race from 500 miles (804 km) to 625 (1000), the Bathurst 500 thus becoming the Bathurst 1000.  RPO 83 Falcon GTs won the 1973 & 1974 Bathurst 1000s.

The “quarter-vent XB GT”: 1973 Ford Falcon XB GT sedan (Body Identification: 54H; Model Code: 18338) in Polar White (Code 3) with Onyx Black (code B) accents over Parchment Vinyl (Code P) with 351C 4V V8 (Code T) and four-speed manual transmission (Code L).  This is the only XB GT ordered with RPO 86 (front quarter-vent windows).

So with a large stock sitting in the warehouse, despite the dismally low take-up rate, the quarter-vents remained available when the XB Falcon (1973-1976) range was released and of the 1952 XB GT sedans sold (there were also 949 two-door Hardtops) a single buyer ticked the RPO 86 box.  Again, while granting the coveted “one-of-one” status, it’s not something of great significance although the car to which the pair of vents was fitted is one of the more desirable XB GTs because it was one of the 139 XB GTs built with the combination of the “4V Big Port” 351 V8 and four-speed Top Loader manual transmission.  The first 211 XB GTs received the fully-imported 351 4V Clevelands, “using up” what was in stock, subsequent models switching to the locally made variant.

US Built 351C-4V in 1973 XB Falcon GT.

Ford Australia had been importing from the US the high-performance 351C-4V V8 for use in the GT but when advised US production of that configuration was ending, the decision was taken to produce a local “high-performance” version of the 351 using the 351C 2V “small port” cylinder heads with “open” combustion chambers and a four-barrel carburetor; Ford Australia only ever manufactured the “small port” heads.  That means the Australian nomenclature “351C-4V” (small ports & four barrel carburetor) differs in meaning from that used in the US where it translated to “big ports & four barrel carburetor”.  It sounded a retrogressive step and while there was some sacrifice in top-end power, the antipodean combo turned out to be ideal for street use because the fluid dynamics of the flow rate through the smaller ports made for better low and mid-range torque (most useful for what most drivers do most of the time) whereas the big-port heads really were optimized for full-throttle operation, something often done on race tracks but rarely on public roads… even in the Australia of the early 1970s.  Still, some did miss the responsiveness of the high-compression US-built engine, even if the difference was really apparent only above 80 mph (130 km/h).  Ford's "2V" & "4V" nomenclature came to mislead some because the terms later were adopted to differentiate between cylinder heads using two (intake) and four (exhaust) valve configurations in the cylinder head(s).  Why Ford decided to use "venturi" rather than the more usual "barrel", "throat" or "choke" doesn't seem to be documented but it must at the time have seemed a good idea.  Ford Australia's hybrid interpretation of the Cleveland (the 2V heads & 4V carburetor combo) must have baffled the Americans which only ever assembled their 351s in matching form.      

The other ceremony that happened in Australia on 11 November, 1975: Ford Australia's photo shoot, Melbourne, Victoria.

Although only 2,901 XB GTs were produced, as the “halo” model it was an important image-maker and the XB range proved successful with almost 212,000 sold over its 34 month life (over 18 months in a generally more buoyant economy XA production had reached over 129,000).  Stylistically, the XB was an improvement over the poorly detailed XA and much was made (among Ford's claimed 2,056 changes from the XA) of the headlight’s high-beam activation shifting from a foot-operated button to a steering column stalk which, thirty-odd years on from the achievement of nuclear fission, doesn’t sound like much but motoring journalists had for years been advocating for “a headlight flasher”, having been impressed by the “safety feature” when being “flashed” on the German Autobahns by something about to pass at high speed.  More welcome still were the GT’s four-wheel disk brakes, acknowledged as good as any then in volume production.  The success of the XB coincided with Ford Australia’s two millionth vehicle leaving the assembly line so on Tuesday 11 November, 1975, Ford’s public relations office invited journalists and camera crews to a ceremony to mark the occasion, laying on the usual catering (including free cigarettes!) to ensure a good attendance.

Ford Australia pre-release publicity shot for the XB range release (embargoed until 15 September 1973).

1973 Ford Falcon XB GT Hardtop (Body Identification: 65H; Model Code: 18318) in Yellow Blaze (Code M) with Onyx Black (code B) accents over Black Vinyl (Code B) with 351C 4V V8 (Code T) and three-speed T-Bar automatic transmission (Code B).  Because the various side windows used by the Hardtop, Ute and Panel Van derivatives were different to fit the door and roof shapes, the quarter-vents were never offered on those and RPO 86 on the Hardtops was the dreaded vinyl roof in tan.  The sunroof (RPO 10) was a rarely (168 Falcons and 244 Fairmonts) specified option.

Unfortunately, the pictures of the dutifully polished XB Fairmont (a Falcon with some gorp) sedan didn’t generate the publicity expected because the next editions of the daily newspapers (there were then a lot of those and they sold in big numbers) had a more sensational story to cover: On that Tuesday, Sir John Kerr (1914–1991; governor-general of Australia 1974-1977) had dismissed from office Gough Whitlam (1916–2014; prime minister of Australia 1972-1975) and his troubled administration.  It was the first time the Crown had sacked a prime-minister since William IV (1765–1837; King of the UK 1830-1837) in 1834 dismissed Lord Melbourne (1779–1848; prime minister of the UK 1834 & 1835-1841) and although in 1932 Sir Philip Game (1876–1961; governor of NSW 1930-1935) had sundered the commission of Jack Lang (1876–1975; premier of New South Wales 1925-1927 & 1930-1932), the few Australians who pondered such things believed the days of meddling viceroys were done.  Sir John however proved the royal prerogative still existed (although paradoxically perhaps now only in the hands of a monarch’s representative rather than their own) and a certain XB Fairmont making a footnote in the history of Australian manufacturing passed almost unnoticed.