Porte-cochere

Porte-cochere (pronounced pawrt-koh-shair, pawrt-kuh-shair, pohrt-koh-shair or pohrt-kuh-shair)

(1) A porch or portico-like structure attached to a building through which a horse and carriage (or now a motor vehicle) can pass in order for the occupants to alight under cover, protected from the weather.

(2) A gateway for carriages in a building, leading from the street to an interior court.

1690–1700: From the French porte-cochère, literally “gate for coaches”, the construct being porte (gateway) + cochère (the feminine adjectival form of coche (coach). Porte was from the Latin porta (a gate or entrance) from the Proto-Italic portā, from the primitive Indo-European porteha, from per- (to pass through/over). It was cognate with the Ancient Greek πόρος (póros) (means of passage).  Cochere was from coche (stage-coach), from the Hungarian kocsi, via the German Kutsche or the Italian cocchio (and a doublet of coach) + -ière.  The –French ière suffix was the feminine equivalent of –ier, from the Old & Middle French –ier & -er, from the Latin -ārium, accusative of –ārius.  It was used to form names in many diverse fields such as botany, architecture, ship-building and chemistry.

The Sublime Porte, photographed in 1904.

Later known as The Imperial Gate (Bâb-ı Hümâyûn), the structure leading to the outermost courtyard of Topkapi Palace, was, until the eighteenth century, known as The Sublime Porte.  Known also as the Ottoman Porte or High Porte (باب عالی‎, Romanized as Bāb-ı Ālī or Babıali), Sublime Porte was a synecdoche for the central government of the Ottoman Empire in the same manner as the White House (US), Number 10 (UK), the Élysée (France) or the Kremlin (Russia).

The linkage which made the term Sublime Porte synecdochic of the Ottoman regime in Constantinople (modern-day Istanbul) was an old procedure in which the ruler delivered official pronouncements and sometimes judicial judgments at the gate of his palace of the palace.  It had been a frequent practice of Byzantine Emperors and was later adopted by Orhan I (Orhan Ghazi 1281–1362; second bey of the Ottoman Beylik 1323-1362) and thus the sultan’s palace became known as the Sublime Porte (High Gate).  The named moved with the sultan so after Constantinople fell to the Ottomans in 1453, the mystique once attached to the palace in Bursa, moved to the new imperial capital where, leading to the outermost courtyard of the Topkapı Palace, it was known variously as the "High Gate", the "Sublime Porte" or the “Imperial Gate” (Bâb-ı Hümâyûn).  The old imperial practice endures in modern politics as the “doorstop interview” although it’s become popular with politicians because having a lockable door immediately to their rear means there’s an easy and safe path with which to beat a rapid retreat when lies are detected or questions become too difficult.

In fourteenth century Europe, French was the most widely-spoken language and in 1539, the King’s Court declared French to be the official language of government.  It was in this era too that diplomacy began to assume a recognisably modern form with an increasingly consistent use of titles, conventions and institutions and this extended sometimes to architecture.  After Francis I (1494-1547; King of France 1515-1547) and Sultan Suleiman the Magnificent (Suleiman I (سليمان اول‎) 1494–1566; Sultan of the Ottoman Empire 1520-1566) negotiated a treaty in 1536, the French emissaries walked through the al-Bab al-'Ali (High Gate) to meet with the Sultan’s ministers to place their seals on the document.  Because French was the language of diplomacy, the French translation “Sublime Porte” was immediately adopted in other European chancelleries and became not only the term for the structure but also the synecdoche which served as a metaphor for the government of the Ottoman Empire.  Among locals however, it was often referred to as the “Gate of the Pasha” (paşa kapusu).  Damaged by fire in 1911, the buildings are now occupied by the offices of the Governor of Istanbul.

1967 Mercedes-Benz 600 (W100, 1963-1981) under the porte-cochere, Stamford Plaza Brisbane, Queensland, Australia.

Leverage

Leverage (pronounced lev-rij, lev-er-ij or lee-ver-ij)

(1) The action of a lever, a rigid bar that pivots about one point and that is used to move an object at a second point by a force applied at a third.

(2) The mechanical advantage or power gained by using a lever.  A force compounded by means of a lever rotating around a pivot.

(3) The power or ability to act or to influence people, events, decisions etc, based on position, personality, reputation etc (an applied to both institutions & individuals); sway.

(4) In finance, the use of a small initial investment, credit, or borrowed funds to gain a very high return in relation to one's investment, to control a much larger investment, or to reduce one's own liability for any loss (in some places known also as “gearing” and often used to express the “debt to equity” ratio).

(5) To use (a quality or advantage) to obtain a desired effect or result:

(6) To provide with leverage.

(7) To invest or arrange (invested funds) using leverage.

(8) To exert power or influence on:

1724: The construct was lever + -age.  Lever (a rigid piece which is capable of turning about one point, or axis (the fulcrum), and in which are two or more other points where forces are applied (used for transmitting and modifying force and motion)) was from the Middle English lever, levore & levour, from the Old French leveor & leveur (a lifter, lever (also Old French and French levier)), from the Latin levātor (a lifter), from levō (to raise).  The suffix -age was from the Middle English -age, from the Old French -age, from the Latin -āticum.  Cognates include the French -age, the Italian -aggio, the Portuguese -agem, the Spanish -aje & Romanian -aj.  It was used to form nouns (1) with the sense of collection or appurtenance, (2) indicating a process, action, or a result, (3) of a state or relationship, (4) indicating a place, (5) indicating a charge, toll, or fee, (6) indicating a rate & (7) of a unit of measure.  Leverage is a noun & verb, leverage is a noun, leveraged & leveraging are verbs and leverageable is an adjective; the noun plural is leverages.

The original meaning was to describe the action of a lever, the meaning “the power or force of a lever” emerging in 1827 while the figurative sense of an “advantage for accomplishing a purpose” dates from 1858.  The use in financial matters seems first to have appeared in writing in 1933 and was a creation of US English, in use as a verb by at least 1956.  The synonyms and related terms when describing the physics of the mechanical effect include mechanical advantage, strength, multiplier effect & force multiplier; in the figurative sense the usual alternatives are clout, influence & pull.  In the world of limited liability companies, leveraged financial arrangements (such as the “leveraged buyout”) are so common that when the mechanism is not used, the adjectives non-leveraged & unleveraged often appear.  The word is so embedded in the slang of those in business where leveraged transactions are common that as a transitive verb, it’s commonly used generally to suggest “to use; to exploit; to manipulate in order to take full advantage of someone or something.  The word has also entered the language of international relations (though used more often by commentators than diplomats) to describe what is known casually as “hostage diplomacy”.  The taking of hostages for ransom or some other purpose is not new and has probably been practiced since human societies first interacted and many cases over the centuries have been documented but historically, the tactic was once blatantly admitted, the gangsterism unconcealed.  Now, states which use hostages for leverage usually gloss things with the pretence of legality, the hostage convicted of something and given a sentence disproportionately long and while none seem yet to have been sufficiently cynical to have used a charge of "unspecified offences" that may yet happen.  The leverage sought tends to be political (the release of prisoners held by the hostage’s country of origin or some other concession) and the expert practitioners are the usual suspects: the DPRK (Democratic People’s Republic of Korea (North Korea)), the PRC (People’s Republic of China) and the Russian Federation.

Lever porn: 1972 Mercedes-Benz Unimog w1416.  The multiple levers were required because of the many drive and gearing combinations available.  In vehicles of this type, this may be close to peak-lever because it's become common to use electronic controls for activation but the attraction of mechanical levers is their robust reliability.  For those who remember the way things used to be done, the tactility is also compelling.

The surname Lever is English and of Norman origin; it was a nickname for a fleet-footed or timid person, from the Old French levre (hare), from the Latin lepus (genitive leporis) although it’s not impossible that at least in some instances, it was a metonymic occupational name for a hunter or trapper of hares.  In some regions it may also have been a topographic name for someone who lived in a place thickly grown with rushes, the link the Old English lǣfer (rush, reed, iris).  Great & Little Lever in Greater Manchester are (collectively) named with this word and if there was a habitational origin to any names it would have come from such placed.  Although rare in Germany, where Lever exists it is a descendent of the medieval personal names Lever (a variant of Liever and Levert, a variant of Lievert.  In Slovenia, it’s an altered form of Levar.

Leverage began its life meaning “to use a lever or some similar tool to gain a mechanical advantage, typically in the context of lifting or moving heavy objects”, the idea generally thus one of “effective force multiplication”.  From here it came variously to be used figuratively, notably sine the 1930s in structured financial transactions.  Financial Leverage is the use of various financial instruments or borrowed capital to increase the potential return of an investment, the attraction the magnification of profit; the risk in increase in potential losses.  Social leverage is not new but it’s assumed a new significance in the age of social media because the proliferation of access afforded by the platforms has removed the “gatekeeper” role the legacy media once fulfilled and a presence, once established in one context can be leveraged into a position in other, lucrative fields.  Fame itself seemed to be enough: Lindsay Lohan’s forays into music and fashion might seem related to her career in film but wouldn’t appear obviously to be linked with her more recent activities promoting cryptocurrency.  That doesn’t matter because notoriety (for better or worse) is enough; her choice of a certain dress to wear to one of her many court appearances saw the garment sell-out within hours.  Nor is this multi-directional leverage a creature only of pop culture, a number of Nobel laureates wryly observing that having won the prize for their accomplishments is a certain branch of science, they end up on the “commentator lists” of media organizations and are asked for their thoughts on things hardly related to their field.

In the matter of Grand Theft Auto (GTA5): Lindsay Lohan v Take-Two Interactive Software Inc et al, New York Court of Appeals (No 24, pp1-11, 29 March 2018)

It’s of course routine for leverage to be weaponized but sometimes, there’s the suggestion the leverage of others can be appropriated and misused, the essence of many an ambush marketing campaign.  Lindsay Lohan in 2014 sued a software house, alleging one of the characters in the game Grand Theft Auto V (GTA5) was based on a likeness of her and thus an invasion of her privacy: “an attempt to leverage her public profile to boost sales of the latest instalment of the series”.  The game’s producers responded, labelling the suit a “publicity stunt” and in private discussions they may also have called it a cunning one.  It took an unremarkable four years from filing for the case to reach New York’s highest appellate court where it was dismissed, six judges of the Court of Appeals finding the “actress/singer” in GTA5 merely resembled a “generic young woman” rather than anyone specific.  Concurring with the 2016 ruling of the New York County Supreme Court which, on appeal, also found for the game’s makers, the judges, as a point of law, accepted the claim a computer game’s character “could be construed a portrait”, which “could constitute an invasion of an individual’s privacy” but, on the facts of the case, the likeness was “not sufficiently strong”.  The “… artistic renderings are an indistinct, satirical representation of the style, look and persona of a modern, beach-going young woman... that is not recognizable as the plaintiff” the judgment read.  Ms Lohan’s lawyers did not seek leave to appeal.

Demi, Hemi & Semi

Demi- (pronounced dem-ee or dem-ahy)

Of less than full size, status, or rank.

Circa 1350s: From the Middle English demi (half, half-sized, partial), from the twelfth century Anglo-Norman demi (half), from the Vulgar Latin dimedius, from the Classical Latin dīmidius, the construct being dis- (apart; in two) + medius (middle).  The French demi which English borrowed was a combining form which existed as noun, adjective, and adverb.  It appears in loanwords from French meaning “half” (demilune), “lesser” (demitasse), or sometimes used with a pejorative sense (demimonde) and, on that model, is also prefixed to words of English origin (eg demigod).

Hemi- (pronounced hem-ee)

A combining form meaning “half,” used in the formation of compound words (eg hemispherical, hemimorphic, hemicardia et al).

Pre 900: From the Middle English hemi from the Ancient Greek prefix ἡμι- (hēmi-) (half), from ἥμισυς (hḗmisus) (half).  It was cognate with the Classical Latin sēmi- and, as a word -forming element meaning "half", was a Middle English borrowing from the Latin hemi- which was taken directly from the Greek hēmi- (half) from the primitive Indo-European semi-, source also of the Sanskrit सामि (sāmí), the Old High German sami- (half) the Old English sam- and others, all soon denoting a partial or imperfect condition as well as the classically correct “half”.

Semi- (pronounced sem-ee)

(1) Half (strictly speaking) as in “semicircle”.

(2) In informal use, a proportion of something less than the whole.

(3) In English, a combining form or prefix (sometimes hyphenated) appended to words of any origin, usually with the senses of “partially,” “incompletely” or “somewhat” (eg semi-final, semi-trailer, semiautomatic, semi-articulated, semi-detached et al).

1400s: From the Middle English semi, from the Latin sēmi- (half).  It was connected with the Old English sōm- & sām- (half) (and related to the modern dialectical sam-), the Old High German sāmi-, the Sanskrit सामि (sāmí) and the Ancient Greek hemi-.  Ultimate root was the primitive Indo-European sēmi.

The word-forming prefixes semi-, hemi-, and demi- all began life meaning “half” but have evolved to mean other things too and exist also not just as prefixes but as stand-alone forms.  As a prefix, there appears to be 951 words with a “semi-” prefix, around 215 with a “hemi-” while a “demi” is appended only to 172, and, although it’s never been a rule, because of the origins, “demi-” is probably best paired with words of French origin, whereas “semi-” is a more natural fit with words with a Latin root.

Semi- may refer to something happening more than once (usually twice) within a certain time and is probably most familiar as “semi-final” to describe the matches of a competition which will determine the finalists.  In English it was used first to mean “half but became soon attached to concepts impossible to quantify (eg semi-abstract; semi-permanent) and thus came to mean also “virtually” or “somewhat.”

Hemi- is often employed in the hard-sciences.  It’s less commonly used than semi-, the association with the technical language of fields such as physics, chemistry, mathematics, biology and anatomy tending to mean it’s applied with more exactitude but even here, practices of use have produced anomalies.  In general use, it’s perhaps best known as a descriptor of the shape of the combustion chamber of certain internal combustion chambers to the extent of “Hemi” the noun being a Stellantis (the holding company of which Chrysler is now a part) trademark, even though many of the engines the company now market as such use a different shape.

Lindsay Lohan in demi-cup bra, photoshoot by Terry Richardson (b 1965) for Love Magazine, 2012.

The demi-cup style is most associated with the “push-up” bra of which Playtex's Wonderbra is the best known.  As the name implies, a demi-cup bra is one where the fabric covers rather less than the mainstream “full cup” bra although not necessarily half, some more revealing than others and the demi-cup is designed better to display the cleavage but need not do so in the exaggerated manner of the push-up bra, almost all of which use a kind of demi-cup.   Many demi-cup bras don't use the push-up engineering though they typically include most of the familiar components (padding, underwires etc).  A variation of the demi style is also inherent to the “plunge bra”, designed to accommodate garments with a low cut but why the industry settled on demi-cup rather than semi-cup isn't known and the term isn't universal, some manufacturers preferring "half cup".  Still, it's definitely all about the cup and to be regarded as a demi bra, it should be constructed with partial cups which cover between 50-75% of the breast and coverage should be the same all across the bra (similar to a balconette bra) as opposed to Plunge or T-Shirt bras where there's a slight dip in the middle.  Additionally, most demis use an underwire in a slightly wider than usual U-shape, evenly arched.

Demi- is used suggest something of less than full-size or status although it doesn’t of necessity imply something inferior.  In English, it’s the rarest of the three forms and, in English, was first used in heraldry, where things like demi-angels, demi-lions, demi-horses were applied to escutcheons.  It also held sway in certain niches such as the military (demi-brigade) and fashion (demi-cap; demi-lustre; demi-worsted) and coach-building (demi-limousine).  Of late, it has absorbed the sense of “virtual” as well as “lesser” and is quirky too: A demigod, while certainly not quite the real thing can be applied with either negative or positive connotations.

1969 Ford Torino Talladega.

Although modest by comparison with Chrysler’s radial Daytona and Superbird, Ford’s aerodynamic enhancements to the Torino proved surprisingly effective.  Actually, so good was the Talladega that when the sleek-looking replacement was released, the racers found it was slower and kept their Talladegas in service as long as they were eligible.  Ford had produced enough of their Fairlane-based Torino Talladegas to run them on the NASCAR circuits but needed to sell five-hundred cars with their new BOSS 429 V8 engine to reach the homologation threshold.

A helpfully inserted quirk in the NASCAR rules allowed them to put the engine in the Mustang rather than the larger Torino which would actually be used for competition.  That was good because the BOSS 429 Mustang attracted great interest and Ford sold more than enough to comply, something few were confident of doing with the Torino.  Additionally, and again helpfully, any doubts about the eligibility of the new engine had been resolved when NASCAR nudged the displacement limit by a couple of cubes.  The capacity limit of 428 cubic inches (7014 cm³) had been imposed in 1963 after Ford, caught cheating using a specialized aerodynamic part called a Starlift roof, sent one of the now-banned cars, fitted with a 483 cubic inch (7.9 litre) engine, to the Bonneville salt flats and set a number of international speed records.  NASCAR was watching what had started out as a "stock car" racing series in which essentially amateur teams could on a good day compete with the professionals, turn into a place where to be competitive, what was required was a big-budget operation, supported by the factories making available exotic and expensive components which had no purpose except on a race track.  Knowing where that 483 would be heading, NASCAR cracked down.  There would be plenty of other squabbles about engines during the 1960s but by the time the BOSS 429 came along, all was forgiven, NASCAR raising the limit to  430 cubic inches (7046 cm³).

1969 Ford Mustang Boss 429.

That was also bad because the Boss 429 was a big lump designed to fit in the wide-bodied intermediates and such was the task to shoehorn it into the narrower Mustang that the job had to be out-sourced to a specialist contractor because inserting the labour-intensive programme into the highly-structured Ford production-lines would have been too disruptive.  Thus, cars were delivered to the contractor which also received the 429 engines in crates.  Destined originally to be fitted with the physically smaller 428 SCJ engines, it was no small task to make the 429 fit, the shock towers being moved outwards along with the upper and lower control arms and stiffer springs were fitted and, surprisingly, it actually worked out quite well.  Although the bulky heads made the 429 a wide piece of machinery, they were made of aluminum and the total package was barely heavier than the all-iron 428 and some even included a few magnesium components which were lighter still.  The changes made had the effect of moving the front wheels further apart and increasing their negative camber and this gave the Boss 429 the best handling and road manners of any big-block Mustang although, it was still a front-heavy thing and clumsy to drive at low speed.  Re-locating the battery to the boot helped weight-distribution a little but none of the changes were ever going to make it behave like a Lotus Elan.

1969 Ford Mustang Boss 429.

However, one implication of things being such a tight fit was that there wasn’t the space to fit a free-flowing exhaust system so in the Mustang it was never possible for the engine to breathe as deeply as it did in the big NASCAR stockers and knowing this, Ford made no attempt to configure the it for maximum output, the carburetor smaller than those used on the Boss 302 and Boss 351.  Nor were the internal components assembled in a specification consistently intended to maximize performance, some built (supposedly in error) with a valve train which limited engine speed and the project anyway was a homologation exercise designed to sell the requisite number of parts required to qualify them for competition although, despite the low production spread over only two years, there were three distinct variations.  The first few hundred (S-code) units used heavy connecting rods secured with ½ inch (13 mm) bolts whereas the rest of the 1969 run and most built in 1970 (T-code) were fitted with lighter pieces and ⅜ (9 mm) bolts and initially, the early T-code engines carried over the hydraulic lifters from the S-code but production soon switched to a solid lifters with a somewhat more lumpy camshaft, the magnesium valve covers at the same time replaced with units cast in aluminum.  Finally there was an edition (A-code) which appeared in the last few of those built in 1970 and it varied from the T-series specification only in in some changes to the plumbing associated with what was still a quite rudimentary anti-pollution system.  Whatever its variations, a Boss 429 Mustang was what it was.

The shotgun ports.

It was also what it was not.  Expectations were high and, on paper, not unreasonable because the notion of putting a genuine seven litre racing engine in something as (relatively) small as the Mustang did hint at something special but, with the strangled engine, although quick, it wasn’t a cataclysm on wheels and the opposition was quicker still.  One of the issues was the fundamental design of those exotic heads.  Nick-named shotgun because the intake and exhaust ports reminded many of the double-barrels of a 12-gauge (although each was large enough almost to swallow a tennis ball), they worked admirably in the Talladegas at high-speed where they were matched with a big carburetor and free-flowing exhaust system.  On the street however, the big shotgun ports rarely saw sustained high-speed running and their sheer size meant the fuel at low speed didn’t achieve the flow-rate necessary for the low-end response needed on the street or strip.

1969 Boss 429 on stand with open exhaust headers.

Prior to release there was talk of quarter-mile runs somewhere in the twelve second range but in reality, no stock Boss 429 ever went quicker than low fourteens, enough to put it in the upper echelon of the muscle car era but there were those who expected more.  More did come, as initially disillusioned engine builders began to understand what it responded to, it became for decades one of the dominant forces in drag-racing, the shotgun ports meaning it took to forced aspiration like few engines, twin-turbocharged Boss engines able to generate thousands of horsepower.

1970 Ford Mustang Boss 429.

So it was quite a legacy and the surviving Mustangs now sell for as much as US$250,000.  Although Ford was compelled to build only 500, 857-odd were sold in 1969 and 499 in 1970 so it’s a bit of an oddity, quite a rarity yet almost mass-produced compared with some of the limited production machines of the muscle car era and such is the allure that there are companies now producing reproductions of the famous heads, modified slightly to fit regular production blocks.  It’s never been known how much money Ford lost on each Mustang it sold but, fitted with the famous Holley Dominator 1150 CFM carburetor and open exhaust headers suited to an engine happiest running at full throttle, the BOSS 429 did its job on the circuits and the company seemed happy with the investment although its life as a flag-bearer would be short, motorsport soon to be neglected as a changing world and a onrush of legislation demanding compliance needing the resources the circuits soaked up.

The semi-hemi combustion chamber.

As well as being nick-named the shotgun, it was also called the semi-hemi.  The BOSS 429’s combustion chambers weren’t actually hemispherical but they tended towards the shape (and the ones used in the race cars sometimes were).  Although Ford apparently would have preferred to have them known as a "blue crescent", it didn't catch on and, there being no obvious word in use to describe what they looked like, they came to be known as semi-hemi.  Musicologists had already gone one better than Ford.  Noting that English had contrived to borrow three words from Antiquity in order to have three prefixes meaning “half”, they invented hemidemisemiquaver to describe a sixty-fourth of a note (ie a half of a half of a half of an eighth note), a coining from that year of semi-revolutions: 1848.

Autophagia

Autophagia (pronounced aw-tuh-fey-juh or aw-tuh-fey-jee-uh)

(1) In cytology, the process of self-digestion by a cell through the action of enzymes originating within the same cell (the controlled digestion of damaged organelles within a cell which is often a defensive and/or self-preservation measure and associated with the maintenance of bodily nutrition by the metabolic breakdown of some bodily tissues).

(2) In cytology, a type of programmed cell death accomplished through self-digestion (known also as apoptosis and associated with the maintenance of bodily nutrition by the metabolic breakdown of some bodily tissues).

(3) In psychiatry, self-consumption; the act of eating oneself.

The construct was auto- + -phagia.  The auto-prefix was a learned borrowing from Ancient Greek αὐτο- (auto-) (self-) (reflexive, regarding or to oneself (and most familiar in forms like autobiography)), from αὐτός (autós) (himself/herself/oneself), from either a construct of (1) the primitive Indo-European hew (again) + to- (that) or (2) the Ancient Greek reflexes of those words, αὖ (aû) (back, again, other) +‎ τόν (tón) (the) and related to Phrygian αυτος (autos), the existence of alternatives suggesting there may have been a common innovation.  Phagia was from the Ancient Greek -φαγία (-phagía) (and related to -φαγος (-phagos) (eater)), the suffix corresponding to φαγεῖν (phageîn) (to eat), the infinitive of ἔφαγον (éphagon) (I eat), which serves as aorist (A verb paradigm found in certain languages, usually an unmarked form or one that expresses the perfective or aorist aspect) for the defective verb ἐσθίω (esthíō) (I eat).  The alternative spelling is autophagal and the synonyms (sometimes used in non-specialist contexts) are self-consumption & auto-cannibalism.  Autophagia, autophagophore, autophagosome & autophagy are nouns, autophagically is an adverb, autophagocytotic is an adjective and autophagic is an adjective (and a non-standard noun); the noun plural is autophagies.

In cytology (in biology, the study of cells), autophagy is one aspect of evolutionary development, a self-preservation and life-extending mechanism in which damaged or dysfunctional parts of a cell are removed and used for cellular repair.  Internally, it’s thus beneficial, the removal or recycling of debris both efficient and (by this stage of evolutionary development) essential, most obviously because it removes toxins and “effectively “creates” younger cells from the old; it can thus be thought an anti-aging mechanism.  It something which has also interested cancer researchers because all cancers (as the word and the parameters of the disease(s) are defined) start from some sort of cell-defect and the speculation is it might be possible to in some way adapt the autophagic process, re-purposing it to identify and remove suspect cells.

In psychiatry, autophagia refers to the act of eating oneself which is sometimes described as self-consumption or the even more evocative auto-cannibalism.  Perhaps surprisingly, the behavior is not explicitly mentioned in the American Psychiatric Association's (APA) Diagnostic and Statistical Manual of Mental Disorders (DSM) which of course means there are no published diagnostic criteria nor recommendations for treatments.  The DSM’s editors note there are a number of reasons why a specific behavior may not be included in the manual notably (1) the lack of substantial empirical evidence or research, (2) the rarity of cases and (3) the material to hand being unsuitable (in terms of volume or quality) for the development of practical tools for clinicians to diagnose and treat a disorders.

It would be flippant to suggest autophagia might have been included when the revisions in the fifth edition of the DSM (DSM-5 (2013)) included a more systematic approach taken to eating disorders and as well as variable definitional criteria being defined for the range of behaviours within that general rubric, just about every other form of “unusual” consumption was listed including sharp objects (acuphagia), purified starch (amylophagia), burnt matches (cautopyreiophagia), dust (coniophagia), feces (coprophagia), sick (emetophagia), raw potatoes (geomelophagia), soil, clay or chalk (geophagia), glass (hyalophagia), stones (lithophagia), metal (metallophagia), musus (mucophagia), ice (pagophagia), lead (plumbophagia), hair, wool, and other fibres (trichophagia), urine (urophagia), blood (hematophagia (sometimes called vampirism)) and wood or derivates such as paper & cardboard (xylophagia).  The DSM-5 also codified the criteria for behaviour to be classified pica (a disorder characterized by craving and appetite for non-edible substances, such as ice, clay, chalk, dirt, or sand and named for the jay or magpie (pīca in Latin), based on the idea the birds will eat almost anything): they must (1) last beyond one (1) month beyond an age in infancy when eating such objects is not unusual, (2) not be culturally sanctioned practice and (3), in quantity or consequence, be of sufficient severity to demand clinical intervention.  However, pica encompassed only “non-nutritive substances” which of course one’s own body parts are not.

Finger food: Severed fingers are a popular menu item for Halloween parties; kids think they're great.  For those who like detail, those emulating nail polish seem to be following Dior shades 742 (top right) and 999 (bottom right). 

In the profession, autophagia seems to be regarded not as a progression from those who eat their fingernails or hair but something with more in common with the cutters.  Cutters are the best known example of self-harmers, the diagnosis of which is described in DSM as non-suicidal self-injury (NSSI).  NSSI is defined as the deliberate, self-inflicted destruction of body tissue without suicidal intent and for purposes not socially sanctioned; it includes behaviors such as cutting, burning, biting and scratching skin.  Behaviorally, it’s highly clustered with instances especially prevalent during adolescence and the majority of cases being female although there is some evidence the instances among males may be under-reported.  It’s a behavior which has long interested and perplexed the profession because as something which involves deliberate and intentional injury to body tissue in the absence of suicidal intent (1) it runs counter to the fundamental human instinct to avoid injury and (2) as defined the injuries are never sufficiently serious to risk death, a well-understood reason for self-harm.  Historically, such behaviors tended to be viewed as self-mutilation and were thought a form of attenuated suicide but in recent decades more attention has been devoted to the syndrome, beginning in the 1980s at a time when self-harm was regarded as a symptom of borderline personality disorder (BPD) (personality disorders first entered DSM when DSM-III was published in 1980), distinguished by suicidal behavior, gestures, threats or acts of self-mutilation.  Clinicians however advanced the argument the condition should be thought a separate syndrome (deliberate self-harm syndrome (DSHS)), based on case studies which identified (1) a patient’s inability to resist the impulse to injure themselves, (2) a raised sense of tension prior to the act and (3) an experience of release or at least partial relief after the act.  That a small number of patients were noted as repeatedly self-harming was noted and it was suggested that a diagnosis called repetitive self-mutilation syndrome (RSMS) should be added to the DSM.  Important points associated with RSMS were (1) an absence of conscious suicidal intent, (2) the patient’s perpetually negative affective/cognitive which was (temporarily) relieved only after an act of self-harm and (3) a preoccupation with and repetitiveness of the behavior.  Accordingly, NSSI Disorder was added to the DSM-5 (2013) and noted as a condition in need of further study.

However, although there would seem some relationship to cutting, it’s obviously a different behavior to eat one’s body parts and the feeling seems to be that autophagia involves a quest for pain and that suggests some overlap with other conditions and it certainly belongs in the sub category of self-injurious behavior (SIB).  The literature is said to be sparse and the analysis seems not to have been extensive but the behavior has been noted in those diagnosed with a variety of conditions including personality disorders, anxiety disorders, obsessive compulsive disorder, schizophrenia and bipolar disorder.  The last two have been of particular interest because the act of biting off and eating some body part (most typically fingers) has been associated with the experience of hallucinations and patients have been recorded as saying the pain of the injury “makes the voices stop”.  Importantly, autophagia has a threshold and while in some senses can be thought a spectrum condition (in terms of frequency & severity), behaviors such as biting (and even consuming) the loose skin on the lips (morsicatio buccarum) or the ragged edges of skin which manifest after nail biting (onychophagia) are common and few proceed to autophagia and clinicians note neurological reasons may also be involved.    

Lindsay Lohan with bread on the syndicated Rachael Ray Show, April 2019.

Autophagia and related words should not be confused with the adjective artophagous (bread-eating).  The construct was the Artos +‎ -phagous.  Artos was from the Ancient Greek ἄρτος (ártos) (bread), of pre-Greek origin.  Phagous was from the Latin -phagus, from the Ancient Greek -φάγος (-phágos) (eating) from φαγεῖν (phageîn) (to eat).  Apparently, in the writings of the more self-consciously erudite, the word artophagous, which enjoyed some currency in the nineteenth century, was still in occasional use as late as the 1920s but most lexicographers now either ignore it or list it as archaic or obsolete.  It’s an example of a word which has effectively been driven extinct even though the practice it describes (the eating of bread) remains as widespread and popular as ever.  Linguistically, this is not uncommon in English and is analogous with the famous remark by Sheikh Ahmed Zaki Yamani (1930–2021; Saudi Arabian Minister of Petroleum and Mineral Resources 1962-1986): “The Stone Age came to an end not for a lack of stones, and the Oil Age will end, but not for a lack of oil” (the first part of that paraphrased usually as the punchier “the Stone Age did not end because the world ran out of rocks”).

Paramount

Paramount (pronounced par-uh-mount)

(1) Chief in importance or impact; supreme; pre-eminent; of the highest importance.

(2) Above others in rank or authority; superior in power or jurisdiction.

(3) A supreme ruler; overlord (now rare thought often in historic texts).

(4) In law (in a hierarchy of rights), having precedence over or superior to another.

1525-1526: From the Anglo-Norman paramount & paramount (pre-eminent; above), the construct being the Old French par & per (by) + amont & amunt (upward).  Par was from the Latin per (by means of, through), from the primitive Indo-European per- (to go through; to carry forth, fare).  Amont & amunt were from the Latin ad montem (to the mountain; upward), the construct being ad (up to), ultimately from the primitive Indo-European héd (at; to) + montem (the accusative singular of mōns (mount, mountain), ultimately from the primitive Indo-European men- (to stand out, tower).  Synonyms include predominant, preeminent, outstanding, capital, cardinal, chief, commanding, controlling, crowning, dominant, eminent, first, foremost, leading, main, overbearing, predominate, premier, preponderant utmost & prevalent while the most common antonyms are insignificant, secondary & unimportant (in historic land law, the antonym paravail was from the Old French par aval (below), the construct being par + aval (down), the construct being the Latin a(d) + val (a valley), from the Latin vallis; of feudal tenants, it referred to those at the bottom of the hierarchy of rights).  Paramount is a noun & adjective, paramountcy paramountship & paramountness are nouns, paramountly is an adverb; the noun plural is paramounts.

Land law and freehold title

Paramount Pictures promotional poster for Mean Girls (2004).

Paramount was originally a term in feudal land-title law.  It described the lord paramount, the one who held absolute title to his fiefdom, not as a grant dependent upon (or revocable by) a superior lord.  A paramount lord was thus superior to a mesne lord (a landlord who has tenants holding under him, while himself the subject of the holding of a superior lord (a kind of sub-letting), mesne being the general legal principle of something intermediate or intervening) whose title to a fief existed ultimately at the pleasure of a superior. The concept endures in modern land law where titles are listed in documents and, even today, there exist jurisdictions where land, said to enjoy an indefeasible title, can still be subject to “paramount interests” which, although unregistered, can prevail over those formally registered.  In land law, a lord paramount could be male or female but in a charming quirk, in the sport of archery, the noun "lady paramount" (the plural being ladies paramount) is the title awarded to the woman who achieves the highest score.

In Australia, the lord paramount is not the crown but the person of the sovereign.  In a legal sense, the king or queen (of Australia) “owns” all the land that constitutes the nation of Australia and those who “own” their own little piece by virtue of holding a valid freehold title (fee simple), in the narrow technical sense, actually hold only a revocable grant from the crown (via some instrument of the state) exercising rights delegated by the sovereign (the king or queen).  Although of no practical significance, it’s not a legal fiction and the position of Queen Elizabeth II (1926-2022; Queen of the UK and other places, 1952-2022) as lord paramount in the system of land tenure in Australia was affirmed by the High Court of Australia in Mabo v Queensland (No 2) (1992).

Mirror

Mirror (pronounced mir-er)

(1) A reflecting surface, originally of polished metal but now usually of glass with a silvery, metallic, or amalgam backing; used casually, any reflective surface.

(2) Such a surface set into a frame, attached to a handle, etc and used usually for viewing oneself or as an ornament or architectural feature.

(3) In music (of a canon or fugue), capable of being played in retrograde or in inversion, as though read in a mirror placed beside or below the music.

(4) In computing, a disk (often as part of an array), website or other resource containing replicated data.

(5) Historically, a kind of political self-help book, advising kings, princes, etc on how to behave.

(6) In zoology, as mirror carp (known regionally as the Israeli carp) a type of domesticated fish commonly found in Europe but widely introduced or cultivated elsewhere (the name based on the creature’s appearance).

(7) In mathematics & geometry, to create the “mirror image” of a shape across a point, line or plane.

(8) To reflect in or as if in a mirror.

(9) To reflect as a mirror does.

(10) To mimic, replicate or imitate something.

(11) To be or give a faithful representation, image, or idea of something.

1175-1125: From the Middle English mirour, from the Old French mireor (mirror (literally “looker, watcher”)), from mirer (look at), from the Latin mīror (wonder at) & mīrārī (to wonder at), from mīrus (wonderful), from the primitive Indo-European smey- (to laugh, to be glad).  The construct of the Middle English mirour was the Latin Mir(er) + -eo(u)r, from the Latin -ātor, a noun suffix of agency; it displaced the native Old English sċēawere (literally “watcher”), which was also the word for “a spy”.  According to Nancy Mitford's (1904–1973) Noblesse Oblige: An Enquiry Into the Identifiable Characteristics of the English Aristocracy (1956), "looking glass" is the "U" (upper-class) term while "mirror" is used by the "non-U" (everyone else).  The alternative spelling mirrour is obsolete.  The verb mirror (to reflect) dates from the 1590s and developed from the noun; the related forms mirrored & mirroring soon followed.  The early fifteenth century Middle English verb mirouren meant “to be a model” in the sense of one’s conduct or behavior while the mid-fourteenth century miren (from the Old French mirer) meant literally “to look in a mirror”.  Mirror & mirroring are nouns & verbs, mirrored is a verb, mirrorlike & mirrorless are adjectives and mirrorful is a noun & adjective; the noun plural is mirrors.

In idiomatic use, the phrases “done with mirrors” and “smoke & mirrors” are used to describe things accomplished within the laws of physics but appear in some way the product of “magic”, smoke and mirrors sometimes used by stage magicians in their tricks.  Mirror is used also to refer to a thing that reflects or depicts something else: a website or a political part might claim to “mirror of public opinion” and a student in search of a high grade might do well to “mirror the lecturer’s opinions”.  To “hold up a mirror to” is used to mean: (1) “to represent and by resemblance provide insight into and (2) To elucidate; to make explicit some aspect of.  Historically, a “mirror” was a kind of political self-help book, advising kings, princes etc on how to behave.  Mirrors have appeared in more than a dozen folkloric superstitions, the best-known of which is the seven years bad luck which will accrue to anyone breaking a mirror, the notion first documented in the 1770s and the Queen’s question “Mirror mirror on the wall, who's the fairest of them all?” was from the German fairy tale Snow White, first publish in 1812 by the Brothers Grimm published it in 1812 as Sneewittchen and subsequently revised for later editions.

1974 BMW 2002 Turbo

The 1973 Frankfurt Motor Show was held in September in an atmosphere of (mostly) untroubled optimism, one indication of which was the debut of the BMW 2002 (E20) Turbo.  In road cars, supercharging had faded from popularity in the post-war years as improvements in technology made it possible to deliver the required output with conventional aspiration and in an era of rising prosperity and low energy costs, increased displacement was an easier path to power and while turbochargers had for decades been widely used in aviation and heavy diesel transports, in cars they were still a rare novelty.  The 2002 Turbo delivered a significant lift in performance so expectations were high, something which seemed justified by the reception the car received at the show and those enchanted by its pace seemed prepared to overlook that as well as enjoying the benefits of turbo-charging, the 2002 suffered also the foibles which afflicted the early implementations of the technology, notably the combination of “lag” (the elapse of time between opening the throttle and the expected response) and the sudden delivery of power (and thus acceleration).

1974 BMW 2002 Turbo (left) and as it would appear in a rear-view mirror (right)

However, within three weeks of the Frankfurt show closing, the first OAPEC (Organization of Arab Petroleum Exporting Countries) oil embargo was declared, the price of oil increasing four-fold in the wake, something which curbed customer enthusiasm for fast, thirsty machines and while plenty were more affected, between 1973-1975, only 1672 were built but the car is now recognized as a pioneer of the template which European (and later other) manufacturers would adopt and over the decades refine to the point where the dreaded “turbo-lag” became just a memory.  The survival rate was high and although the performance level was later much surpassed (without any need for turbo-charging), they became much sought after by those wanting to enjoy what could be an exciting experience.  They’re now a collector’s item bought more to admire and trade than drive and prices in excess of US$200,000 are not unknown.  When first announced, the cars allocated to the press fleet had “2002” and “turbo” written in reverse lettering on the front spoiler, just to let drivers glancing in their rear-view mirrors was coming up fast although in the six months following the release, a 100 km/h (60 mph) was imposed on the autobahns as a fuel-saving measure so opportunities to overtake were limited.  The message implied in the graphics attracted the interest of the authorities in some German Länder (state governments) which claimed the concept was “aggressive” and cars with the lettering might not be registered.  Aggression has been a sensitive topic in Germany since 1945 and BMW made the graphics and option but apparently nowhere in the country was registration denied and like the originally optional blue strips on Shelby Mustangs, many 2002 Turbos have since had the graphics retrospectively applied.

Selfie expert Lindsay Lohan, well acquainted with the properties of mirrors.

In computing, the concept of “mirroring” exists in several contexts but the best-known and most widely practiced is in data storage and management.  “Disk mirroring” describes the replication of data stored on one volume onto a physically separate volume, sometimes in the one physical array, sometimes onto media far away.  The attraction of mirroring is that in the event of disk failure, data losses are limited (often eliminated) because the system can continue to use one disk until the failed unit is replaced.  One of the most widely used (and simplest) implementations is RAID (Redundant Array of Inexpensive Disks) Level 1 which in which two disks operate in unison although users only ever see one volume.  Various methods of writing data are used, described usually as synchronous, asynchronous and semi-synchronous and the choice is dictated both by cost and what’s technically possible.  The ideal approach is synchronous writing under which, at most, data losses related to disk failure should be measured in minutes or even seconds.  The industry standard for corporations using mirroring has long been the “hot-swap” which means a failed disk can be pulled from a system while running and a replacement inserted, the RAID software re-mirroring (re-building) the new disk.  A less often seen configuration includes a standby disk which sits in a system, remaining unused until notified of failure in which case it assumes the role of the failed media, re-mirroring beginning as soon as it is found to be on-line.