Penthouse

Penthouse (pronounced pent-hous)

(1) An apartment or dwelling on the roof of a building, usually set back from the outer walls.

(2) Any specially designed apartment on an upper floor, especially the top floor, of a building.

(3) A structure on a roof for housing elevator machinery, a water tank etc.

(4) Any roof-like shelter or overhanging part.

(5) In Real Tennis, a corridor having a slanted roof and projecting from three walls of the court.

(6) As mechanical penthouse, a floor, usually directly under a flat-roof, used to house mechanical plant & equipment.

(7) A special-interest magazine, aimed at a mostly male audience and published in several editions by a variety of owners since 1965.

1520–1530: Despite the appearance penthouse is not a portmanteau (pent + house) word.  Penthouse is an alteration (by folk etymology) of the Middle English pentis, pentiz & pendize (and other spellings), from the Old French apentiz & apentis (appendage, attached building), the construct being apent (past participle of apendre (to hang against)) + -iz (the French -is ) from the unattested Vulgar Latin –ātīcium (noun use of neuter of the unattested –ātīcius, the construct being the Latin -āt(us) (past participle suffix) + -īcius (the adjectival suffix)).  Old French picked up apentis from the Medieval Latin appendicium (from the Classical Latin appendo (to hang) & appendere (to hang from).  A less common alternative variant to describe a shed with a sloping roof projecting from a wall or the side of a building was pentice.  Penthouse is a noun; the noun plural is penthouses.

1965 Iso Grifo Bizzarini A3/C, Le Mans, 1965.

One of the most admired of the trans-Atlantic hybrids of the post-war years (1945-1973) which combined elegant coachwork, (hopefully) high standards of craftsmanship and the effortless, low-cost power of large-capacity American V8 engines, the Iso Grifo was produced between 1965-1974 by the Italian manufacturer Iso Autoveicoli.  Styled by Bertone’s Giorgetto Giugiaro (b 1938) with engineering handled by the gifted Giotto Bizzarrini (b 1926), the Grifo initially used a 327 cubic inch (5.3 litre) version of the small-block Chevrolet V8, coupled with the equally ubiquitous Borg-Warner four & five speed manual gearbox or robust General Motors (GM) automatics.  Later, after some had been built with the big-block Chevrolet V8, GM began to insist on being paid up-front for hardware so Iso negotiated with the more accommodating Ford Motor Company and switched to 351 cubic inch (5.8 litre) versions of their 335 (Cleveland) engine.

1955 Iso Isetta.

Iso was already familiar with the mechanical configuration, production of their Rivolta coupe, equipped also with the Chevrolet 327, having begun in 1962.  The Rivolta, let alone the Grifo was quite a change of direction for Iso which until then had produced a variety of appliances, scooters & moto-cycles, it’s most famous product the Isetta, one of the generation of “bubble cars” which played such a part in putting Europeans back on (three or four) wheels during the re-construction of the post-war years.  Surprisingly, despite the prominence of the Isetta name and the Italian association, barely a thousand were actually manufactured by Iso, the overwhelming majority produced in many countries by BMW and others to which the a license was granted.  Powered by tiny two and four-stroke engines, their popularity waned as “real” cars such as the Fiat 500 (1955) and later the Mini (1959) emerged; although costing little more than the bubble cars, they offered more space, performance and practicality.  By the early 1960s, the bubble cars were driven almost extinct but, as a tiny specialized niche, they never completely vanished and the Isetta is enjoying a twenty-first century revival as model urban transportation, including the option of electric propulsion.

1968 Iso Rivolta.

The Rivolta was thus quite a jump up-market and, while the engine wasn't the bespoke thoroughbred found in a Ferrari or Aston-Martin, the rest of the specification justified the high price.  Unlike some of the British interpretations using American V8s, Iso insisted on modernity, the platform probably the best of the era, the body welded to a pressed-steel chassis, a combination which proved both light and stiff.  Just as importantly, given the high rate of corporate failure among those attracted to this potentially lucrative market, it was cost-effective to manufacture, reliable and easy to service.  Probably the feature which let it rank with the most accomplished of the era was the sophisticated de Dion rear suspension which, combined with four wheel disc brakes, lent it a rare competence.  The de Dion design was not an independent arrangement but certainly behaved as if it was and, despite what Mercedes-Benz claimed of their beloved swing-axles, was superior to many of the independent setups on offer.  A noted benefit of the de Dion system is it ensures the rear wheels remain always parallel, quite an important feature in an axle which has to transmit to the road the high torque output of a big V8, a lesson Swiss constructor Peter Monteverdi (1934–1998) applied later in the decade when he went into production using even bigger engines.  Iso, with a solid base in accounting and production-line economics, ran an efficient and profitable operation not beset by the recurrent financial crises which afflicted so many and the elegant Rivolta was a success, remaining available until 1970.  Some eight hundred were sold.

1967 Iso Grifo Series One.

The Rivolta’s platform proved adaptable.  In 1965, Iso released the Grifo coupé, more overtly oriented to outright performance and strictly a two-seater.  With lovely lines and a modified version of the Rivolta’s fine chassis, the Grifo was another product of the fertile imaginations of Giugiaro & Bizzarrini but, in something not untypical in Italian industry of the time, the relationship between the latter and Iso’s founder Renzo Rivolta (1908–1966) soon became strained and was sundered.  Bizzarrini would go on to do remarkable things and Iso’s engineers assumed complete control of the Grifo after the first few dozen had been completed.  Bizzarrini had pursued a twin-stream development, a competition version called the A3/C with a lower, lightweight aluminum body as well as the road-going A3/L and when he decamped, he took with him the A3/C, to be released also under his name while Iso devoted its attentions to the A3/L, again using engine-transmission combinations borrowed from the Corvette.

1964 Iso Grifo Spider.

The Grifo weighed a relatively svelte 1430 kg (3153 lbs) in what must have been a reasonably slippery shape because the reports at the time confirmed some 240 km/h (150 mph) was easily attained, an increase on that managed by the Corvette and, when configured with the taller gearing the factory offered, the factory claimed 260 km/h (162 mph), was possible.  A test in the UK in 1966 almost matched that with a verified 161 mph (259 km/h) recorded and two year later, the US publication Car & Driver 1968 tested a 327 Grifo but didn't to a top-speed run, instead estimating 157 mph (253 km/h) should be possible given enough road.  There were surprisingly few variations, fewer than two-dozen made with a targa-style removable roof panel and a single, achingly lovely roadster was displayed on Bertone's stand at the 1964 Geneva Motor Show; it remained a one-off although a couple of coupés privately have been converted.

1970 Iso Grifo Series Two.

The bodywork was revised in 1970, subsequent cars listed as series two models.  The revisions included detail changes to the interior, improvements to the increasingly popular air-conditioning system and some alterations to the body structure, the hydraulics and the electrical system, most necessitated by new regulatory requirements by some European countries but required mostly in an attempt to remain compliant with the more onerous US legislation.  The most obvious change was to the nose, the headlamps now partially concealed by flaps which raised automatically when the lights were activated.  Presumably the smoother nose delivered improved aerodynamics but the factory made no specific claims, either about performance or the drag co-efficient (CD) number.

1972 Iso Lele & 1972 Iso Fidia.

In 1972, an unexpected change in the power-train was announced.  After almost a decade exclusively using Chevrolet engines, Iso issued a press release confirming that henceforth, the series two Grifo would be powered by Ford’s 351 cubic inch (5.8 litre) 335 series (Cleveland) V8.  In the state of tune chosen by the factory (essentially the same as fellow Italian specialist De Tomaso were using in their mid-engined Pantera), the Ford engine was similar in size, weight to the small-block Chevrolet and delivered similar power and torque characteristics so the driving experience differed little although there were 22 high-performance Leles using a tuned 351, all with a ZF five-speed manual gearbox.  The other improvement in performance was presumably Iso’s balance sheet.  The switch had been made because internal policy changes at GM meant they were now insisting on being paid up-front for their product whereas Ford was still prepared to offer an invoice with a payment term.  The change extended to the other models in the range, the Lele coupé and Fidia saloon and while the Chevrolet/Ford split in the Lele was 125/157, the circumstances of the time meant that of the 192 Fidias made, only 35 were fitted with the 351.

1969 Iso Grifo 7 Litre (427).

One of the trends which made machines of the 1960s so memorable was a tendency never to do in moderation what could be done in excess.  In 1968, Iso announced the Grifo 7 Litre, built following the example of the US manufacturers who had with little more than a pencil and the back of an envelope worked out the economics of simple seven litre engines were more compelling than adding expensive components like overhead camshafts and fuel-injection to five litre engines.  Petrol was, of course, cheap and limitless.  Petrol actually wasn’t as cheap in Italy or the rest of Europe but Iso’s target market for the Grifo was those who either could afford the running costs or (increasingly) paid their bills with other people’s money (OPM) so fuel consumption wasn’t something often considered.  The new version used a 427 cubic inch (7.0 litre) version of the big-block Chevrolet V8, bigger and heavier than the 327 so the driving characteristics of the nose-heavy machine were changed but contemporary reports praised the competence of the chassis, the de Dion rear-end notably superior in behavior compared with the Corvette’s independent rear suspension although some did note it took skill and often a sense of restraint, effectively to use the prodigious power.  Tellingly, the most receptive market for the Grifos, small and big-block, was the Federal Republic of Germany (FRG, the old West Germany) with its network of highways without the tiresome speed limits elsewhere imposed and (even in Italy), often enforced.  The autobahn really was the Grifo's native environment.   

1970 Iso Grifo Can Am (454).

Faster it certainly was although the factory’s claim of a top speed of 186 mph (a convenient 300 km/h) did seem optimistic to anyone with a slide-rule and there appears not to be any record of anyone verifying the number although one published test did claim to have seen well over 255 km/h (150 mph) with the Grifo still "strongly accelerating" before “running out of road”.  It had by then become a genuine problem.  Gone were the happy times when testers still did their work on public roads; increased traffic volumes by the late 1960s meant the often deserted stretches of highway (in 1956 an English journalist had taken a Mercedes-Benz 300SLR Coupé to 183 mph (294 km/h) on the autobahn) were now rare but whatever the terminal velocity, nobody seemed to suggest the 7 litre Grifo lacked power.  In 1970, after Iso’s stock of the by-then out-of-production 427 were exhausted, the big-block car was re-named Can-Am and equipped instead with a 454 cubic inch (7.5 litre) version, the name an allusion to the unlimited displacement Group 7 sports car racing series run in North America in which the big-block Chevrolets were long the dominant engine.  Despite the increased displacement, power actually dropped a little because the 454 was detuned a little to meet the then still modest anti-emission regulations.

1971 Iso Grifo Can Am (454).

Unlike the 427 which breathed through three two barrel carburetors, the 454 was equipped with less intricate induction, a single four barrel and, officially, output dropped from 435 horsepower to 390 but, these were gross (SAE) numbers and Detroit’s high-performance engines in this era were rated at something around what a manufacturer thought would be acceptable (all things considered), rather than an absolutely accurate number but the 454 certainly was just a little less potent than the 427 although it's probable few owners often went fast enough to tell the difference.  What didn’t change between the 7 Litre and the Can Am was its most distinctive feature, the modification to the hood (bonnet) made to ensure the additional height of the 427's induction system could be accommodated.  The raised central section, the factory dubbed "the penthouse".

Penthouse on 1969 Iso Grifo 7 Litre (427).

Not everyone admired the stark simplicity, supposing, not unreasonably, that Giugiaro might have done something more in sympathy with its surroundings.  Critics more stern would have preferred a curvaceous scoop or bulge and thought the penthouse amateurish, an angular discordance bolted unhappily atop Giugiaro’s flowing lines  but for those brought up in the tradition of brutalist functionalism, it seemed an admirable tribute to what lay beneath.  The days of the big-block Grifo were however numbered.  In 1972, with Chevrolet no longer willing to extent credit, and Ford’s big-block (429 & 460) engines re-tuned as low-emission (for the time) units suitable for pickup trucks and luxury cars, the Can-Am was retired.  So the small-block 351 Grifo became the sole model in the range but it too fell victim to changing times, production lasting not long beyond the first oil shock in October 1973 which made petrol suddenly not only much more expensive but sometimes also scarce and the whole ecosystem of the trans-Atlantic machines became threatened and in little more than a year, Iso was one of the many dinosaurs driven extinct.  Decades later, the survivors of the 412 sold are highly desirable; fine examples of the small-block Grifos attract over US$500,000, the few dozen penthouse cars can sell for up to a million and the rare early A3/Cs for well over.

Not fans of brutalist functionalism were the Lancia-loving types at Road & Track (R&T) magazine in the US.  Late in 1974, R&T published their 1975 buyer’s guide for imported and domestically-built smaller cars (R&T neither approving of nor understanding why anyone would wish to buy a big American car) and surprisingly, there were reviews of the Grifo, Lele and Fidia although the last of these sold in the US some two years earlier had been titled as 1973 models, the company having never sought to certification to continue sales although, given nothing had been done to modify them to meet the new safety regulations, that would likely have been pointless unless the strategy was to seek a "low volume" exemption, something improbable by 1975.  The distributors had however indicated to the press all three would return to the US market in 1975, supplying publicity photographs which included a Series II "penthouse" Grifo although the big-block cars hadn't been built in Italy since 1972.  A further complication was that during 1974, Ford had discontinued production of the high-performance 351 (the "Cleveland" 335 series) V8 so it wasn't clear what power-train would have been used.  Others had the same problem, De Tomaso (which withdrew from the US market in 1974) switching to use tuned versions of the Australian-built Cleveland 351s but for Iso, the whole issue became irrelevant as the factory was closed late in 1974.  R&T's last thoughts on the penthouse appeared in the buyer's guide:

"However, the clean lines of the original Grifo have been spoiled by that terrible looking outgrowth on the hood used for air cleaner clearance.  For US$28,500 (around US$150,000 in 2024 $ although direct translation of such a value is difficult to calculate because of the influence of exchange rates), a better solution to this problem should have been found."

View from the penthouse in which Lindsay Lohan lived in 2014, W Residences, Manhattan, New York City.

Especial

Especial (pronounced ih-spesh-uhl)

(1) Special; exceptional; outstanding.

(2) Of a particular kind, or peculiar to a particular one; particular.

1350-1375: From the Middle English especial, from the Old and Middle French especial (pre-eminent, important) from the Latin speciālis (pertaining to a particular kind or species) from species (appearance, form, beauty), from specere (to look).  In French, the forms differed: Latin words with initial sp-, st- and sc- usually acquired an e- when borrowed by Old French whereas Modern French has restored the word to spécial.  The adverb especially emerged in the late fourteenth century, shortly after the adjective.  Especial is an adjective and (in commerce with an initial capital) a proper noun, the rare especialness is a noun and especially is an adverb; the proper noun plural is Especials.

Meanings of special and especial are essentially the same yet usage differs.  Special is common, especial rare, specially is rare, especially common.  Most dictionaries however maintain especial and especially should have a more limited use than special and specially.  Special is always used in preference to especial when the sense is one of being out of the ordinary.  Special is also used when something is referred to as being for a particular purpose.  Where an idea of pre-eminence or individuality is involved, either especial or special may be used,  In informal English however, special is usually preferred in all contexts but especially tends to prevail, probably because it’s a sound which more easily rolls of the tongue.  Special is by far more common than especial; the Corpus of Contemporary American English (COCA) claims special is used some six-hundred times for every time especial is used.  It’s more economical too for unlike especial, special does not demand to be followed by a noun.  However, all of this applies to English and in Spanish the adjective especial is common.  To purists, use of especial should be rare and use confined to particular contexts where it collocates with particular nouns and especially where it avoids conflicts with other specific meanings: An especial interest or an especial value meaning something different than a special interest or special value.  In A Dictionary of Modern English Usage (1926), Henry Fowler (1858–1933) observed the characteristic sense of especial & especially was "pre-eminence of the particular as opposed to the ordinary" whereas special & specially were used to convey the idea of the "particular as opposed to the general".  However, he proceeded to acknowledge modern practice which tended to use such special for all such purposes, leaving it for the recipient to pick up the meaning from the context, something he seemed to concede was "possible" if not "preferable" and he noted the continuing popularity of especially, lamenting only that it appeared to encourage tautology, constructions like "more especially" condemned.      

Special relativity: Being especially special

Holden, the General Motors (GM) Australian subsidiary, for over a decade had it pretty easy, enjoying a fifty-percent market share despite by the early 1960s its products being, whatever their other virtues, outdated and underpowered.  GM would later respond but in the short-term, resorted to a bit of tarting-up.  Holden had for ten years used the Special designation for their up-market offering but in 1962 added a new top of the range model called the Premier, meaning the Special was no longer so special.  Despite this, the name endured another six years before becoming the Kingswood which was no more special, the new name meaning nothing in particular.  Confusing things still further, for most of the years it existed, the Special was actually the best-selling Holden, the other models, the Standard and the shorter-lived Business, enjoyed lower sales so in that sense, the Special was the standard model rather than the Standard.

So, by 1968, GM had in Australia ceased to call anything Special though much of their advertising continued to suggest everything they sold was special in some way.  In the US, GM's use of the Special badge started sooner and lasted longer, Buick using it first in 1936, curiously for their lowest-priced model, a placement similar to that seen sometimes in education where it was applied to classes or schools for those with learning difficulties (although that use has ceased, falling foul of the linguistic treadmill).  Buick of course no more wanted their customers to make a connection with "special education" any more than with Albert Einstein's (1879-1955) theory of special relativity which explains how space and time are linked for objects moving at a consistent speed in a straight line.  Buick's interest in relativity was probably limited to that between the models in its line-up and Special really meant nothing other than being a word thought to have generally positive associations.  Additionally, Buick buyers didn’t like change then any more than now.

The 1969 Buick GS Sport Wagon was much more special than that year’s rather mundane Special Deluxe.  Like the similar model from Oldsmobile, the Sport Wagon was notable for the roof-mounted skylights.

After a brief hiatus, the Buick Special returned in 1938, its run in cars of various sizes almost uninterrupted until 1970.  In 1968 however, Buick must have had a moment of doubt that the Special may no longer be special enough and the range was renamed Special Deluxe, a change that lasted but two years.  In the 1970s and 1990s, there would be two half-decade long revivals but in 1996, the Special finally went extinct, not even Buick's entry into the Chinese market enough to encourage a revival.

1966 Ferrari 365 P Berlinetta Speciale.  Probably everything sounds better in Italian than English.  To the ears of English-speakers, a reading in Italian from a lawn-mower repair-manual sounds like the words of a lyric poet.

The Ferrari 365 P Berlinetta Speciale was a design by Pininfarina shown in 1966 and was both a test bed for a racing project and an exploration of the possibility of a mid-engined V12 road car, the styling taking cues from the designer’s smaller Dino 206 Berlinetta Speciale, built in 1965.  Reflecting the origin of its race-car chassis, the 365 Speciale was configured with three-abreast seating and a central driving position, a layout seat McLaren would later adopt for their F1 (1992-1998).  In a nod to the seating, the car is sometimes referred to as the 365 Berlinetta Tre-posti (three seater).  Ferrari still use speciale as a name.

1965 Dino 206 Berlinetta Speciale.

The Dino Speciale would influence the later Dino 206 & 246 road cars, produced by Ferrari between 1967-1974.  The relationship with the 365 is obvious but, being scaled up to accommodate the big V12, the lines aren’t as harmonious as the dainty V6 Dino, reflecting the difficulties stylists had applying the layout when using bulky engines.  Still, the 365 P Speciale provided the factory with valuable experience in the then novel concept and traces of the shape are evident in what did in 1971 emerge as the 365 GT/4 Berlinetta Boxer, the prototype which would become Ferrari’s first mid-engined twelve-cylinder car to reach production.  The Boxer's svelte shape was however made possible by flattening the vee to 180^o, something which proved a more satisfactory solution to the problem than the transverse location of the 60^o V12 Lamborghini used in 1966 for the Miura.  Achingly beautiful though the Miura was, its behaviour at speed could be tricky, exactly the reason Ferrari chose not to make the Stradale.       

1965 Ferrari 250 LM Stradale.

The 365 Speciale was actually the second mid-engined V12 road car Ferrari built; in 1965, the 250 LM Stradale (road) had been displayed at the Geneva Motor Show.  Based on the Le Mans winning 250 LM, it was a prototype for what was planned to be a small batch of road cars but Enzo Ferrari (1898-1988), then anyway dubious about the very idea of mid-engined V12s with all-independent suspension falling into the hands of amateurs, vetoed the project, the Stradale still just too much a racing car to let the unskilled rich unleash one on the streets.

Mean Girls Special Collector's Edition (2004) on DVD, Paramount Pictures (part number D341604D).

There’s no defined standard for what is included in “special” editions of commercially released films but unlike “director’s cut” versions which to some extent change the actual content of the original releases (cinema, optical, TV or streaming), “special editions” tend to be the original plus a bundle of “extras”.  Assembled usually as “featurettes”, typically, the additional content will consist of interviews with the cast, director or writers, out-takes, bloopers, deleted scenes, advertising and other promotional material and sometimes commentaries from critics or commentators with expertise in some issue of interest.  For nerds, there’s sometimes even content about technical aspects of production, an addition most often seen with product made with much use of special effects but discussions about matters such as fashion or history might also appear.

The Mean Girls Special Collector's Edition included (1) discussions about casting, (2) an interview with Rosalind Wiseman (b 1969), author of Queen Bees and Wannabes (2002) on which the Mean Girls screenplay was based, (3) commentary by the writers and producers, (4) “Word Vomit” (the Blooper Reel), (5) deleted scenes with commentary, (6) “Plastic Fashion” (a discussion about costume design and the use of clothing as a metaphor for character development), (7) interstitials (advertising material created with original material not used in the final cut) and (8) promotional trailers for other Paramount films.

Tea Tray

Tea Tray (pronounced tee-trey)

(1) A tray used to carry a tea service.

(2) A tray of this type used for related purposes.

(3) The accepted descriptor of certain rear spoilers on some Porsches.

Mid-late 1600s: Trays in one form or another are probably one of mankind’s earliest inventions and the creation of the “tea tray” reflected the popularity of the brewed leaf and the place it assumed in polite society as the rich were able to purchase elaborate “tea services” (cups, saucers, milk jugs, tea pots, strainers et al).  In England and Europe, the “taking of tea” in such circles was sometimes formalized    

The noun tea entered English in the late sixteenth century, from the Dutch thee, from the Amoy (Xiamen) dialect of Hokkien 茶 (written both as “tê” & “t’e”), akin to the Chinese chá, from Old Chinese, thought ultimately from the primitive Sino-Tibetan s-la (leaf, tea).  It was the merchants of the Dutch East India Company (based in what is modern-day Indonesia) who after 1610 brought the leaf (and thus the word “tea”) to England and other parts of Western Europe.  The traders obtained the leaf in Amoy (the Malay teh was shipped along the same trade routes). The doublets chai and cha are from the same root.  Served in Paris by at least 1635, tea was introduced in England by 1644.  The spelling “tea” wasn’t at first the default, the variations including tay, thea, tey & tee and the popular early pronunciation seem to have been to rhyme with obey, the familiar modern tee not predominate until the late eighteenth century.  The Russian chai, the Persian cha, the Greek tsai, the Arabic shay and the Turkish çay all came overland from the Mandarin form.  The meaning “afternoon meal at which tea is served” dates from 1738 and is still used in certain regions to mean “evening meal” in the sense other use “dinner” (historically, for these folk “dinner was served around midday).  In US use, tea was slang for “marijuana” during the 1930s (apparently an allusion to it being often brewed in boiling water) but an onrush of newer slang rendered it obsolete as early as the early 1950s.

Lindsay Lohan in The Parent Trap (1998) with silver tea tray.

Tray (a small, typically rectangular or round, flat, and rigid object upon which things are carried) predates the eleventh century and was from the Middle English treye, from the Old English trēġ & trīġ (flat wooden board with a low rim), from the Proto-West Germanic trauwi, from the Proto-Germanic trawją or traujam (wooden vessel), from the primitive Indo-European dóru, a variant of the root drewo- (be firm, solid, steadfast (with also the specialized senses  “tree; wood” and derivatives referring to objects made of wood. The primary sense may have been “wooden vessel”).  It was cognate with the Old Norse treyja (carrier), the Old Swedish trø (wooden measure for grain & corn), the Low German Treechel (dough trough), the Ancient Greek δρουίτη (drouítē) (tub, vat) and the Sanskrit द्रोण (droṇa) (trough); trough and tree were influenced by the same sources.  The alternatives teatray and tea-tray are both accepted as standard forms but both are usually listed as “rare”, the former especially so.  Tea tray is a noun; the noun plural is tea trees.

George IV sterling silver tea set, hallmark from the silver workshop of Rebecca Emes (widow of silversmith John Emes (circa 1765-1810)) & Edward Bernard who were in partnership between 1808-1829.

The pieces are rendered in a melon shaped form with a textured leaf inspired frieze at the top register, rising from embellished shell form feet.  Originally a four piece set (teapot, coffee pot, cream jug and open sugar bowl) more than a century later a Canadian owner commissioned (through Birks (Canada)) a matching muffin dish.  The trademark on the muffin dish is that of Ellis & Co, Empire Works, Great Hampton Street & Hall Street, Birmingham (hallmarked 1937).  The tea tray is a sterling silver “George III” tea tray by Solomon Hougham,

High tea at the Savoy, London: High teas are events where ladies meet to talk about their feelings.

Although there are some striking modernist creations, the most sought after teas sets are those of porcelain or sterling silver, antique versions of the latter more common simply because they are less fragile, lasting centuries with only minimal care.  The first tea sets seem to have been the simple porcelain containers made in China during the Han Dynasty (206–220 BC).  From these humble, functional beginnings came eventually the intricately designed services of the eighteenth & nineteenth centuries which included not only the teapot and tea tray but also cups, sugar bowls with tongs, milk jugs, small plates for lemon slices and a remarkable variety of strainers and sieves to filter out pieces of the leaves.  In the sixteenth century porcelain tea sets arrived with the leaf and like many innovations from the East, consumption was originally limited to the rich who soon began to object to scalding their fingers on the handle-less cups; cups with handles (surely a marker of civilization) soon became essential in any drawing room.  Less pleasingly, adding milk and sugar also became fashionable so sugar bowls and milk jug (creamers) were added to sets along with the necessary teaspoons.  The tea craze thus influenced furniture, the “tea table” the item on which tea was served, sometime a place for the tea tray to sit but used also for more elaborate events which included cakes and such; this was the origin of the modern “high tea” which became such a profitable side-line for hotels.  Sterling silver tea sets began to appear in the late eighteenth century although it would be some decades before they attained great popularity, aided by Queen Victoria’s (1819–1901; Queen of the UK 1837-1901) fondness for tea and although the influence of the British royalty on the fashions of society was often negligible, in this she seems to have led the way.

Forks in evolution: The ducktail, the whale tail and the tea tray

There was much thoughtful engineering which made the 1973 Porsche 911 Carrera RS 2.7 such a formidable car in competition both in terms of what was taken out (most creature comforts) and what was put in (horsepower, light weight components and a braking system said to cost about as much as a new Volkswagen Beetle) but what caught the eye of most were the lurid graphics along the sides (Yellow, Blue, Green, Red and Blood Orange among the choices) and the spoiler which sprouted from the rear; it came to be called the “Ducktail” and was the subject of Patent 2238704: “The invention relates to a passenger car with a rear spoiler – one preferably mounted between side panels - and an aerodynamic device in the rear to increase the dynamic rear wheel pressure.”

1973 Porsche 911 Carrera RS 2.7 during wind tunnel testing of the Ducktail spoiler (left) and a production version with blue graphics (right).

The 911 Carrera RS 2.7 was a homologation special and Porsche planned to build only the 500 identical road-legal versions examples demanded to qualify the thing to be eligible competition under the Group 4 (Gran Turismo) regulations.  Although its 210 hp (156 kW) doesn’t sound impressive fifty years on (and even in the era there were many more powerful machines), weighing a svelte 960 KG (3086 lb), it could reach 100km/h (60 mph) in 5.8 seconds and touch 245 km/h (152 mph).  Given the performance, the Ducktail was a necessity to ensure there was at speed no dangerous lift at the rear but the factory was soon compelled to issue a bulletin warning that anyone fitting a ducktail to any other 911 would also have to fit the factory's front spoiler because, without the front unit, the rear down-force would become “excessive”, lifting the nose, the result: instant instability.  As it turned out, demand was greater than expected and eventually 1580 cars were built, many with a few of the creature comforts restored and today the 1973 Carrera is among the most collectable of the 911s; sales over US$2 million have been recorded.

1974 Porsche 911 Carrera RS 3.0 with whale tail.

The delicate lines of the 911 were spoiled when the 1974 models were released, the “impact” bumpers grafted on to satisfy US regulations an unhappy addition but in fairness to Porsche, their implementation was aesthetically more successful than many, notably their Stuttgart neighbors Mercedes-Benz which appeared to have taken for inspiration the naval rams once fitted beneath the waterlines of battleships and there to sink smaller vessels by ramming; at least on warships they couldn’t be seen.  The Ducktail however survived the legislative onslaught and became available on the new Carrera coupe (fitted as standard in North American markets) which was a pure road car without any of the compromises which made its raw-boned predecessor so engaging.

Later in the year however, a variant of the rear spoiler evolved for the 911 Carrera RS 3.0, this time rendered as a larger, flatter piece with rubber edges, the trailing edge rakishly upturned; it came to be called the “Whale Tail.”  Actually to speak of the Whale Tail as an item is a little misleading because the evolution continued and it was only the early examples which used the simple construction with a recessed grille which tracked the line of the engine cover, blending into the uninterrupted flat expanse of the spoiler itself.  By 1976 the (pre-intercooler) Turbo Carrera (the 930, the so-called “widow-maker”) was fitted with a Whale Tail with a second grille inset into the spoiler itself and to complicate the parts catalogue further, the secondary grille on the RoW (rest of the world) cars was smaller than that fitted to vehicles destined for North America; again the increasingly rigid US regulations the cause.  As the years went by, the Whale Tail continued to change.

The Whale Tail (left) and the Tea Tray (right)

By 1978, there was another evolutionary fork, the 911 Turbo’s spoiler becoming the “Tea Tray”, distinguished by a continuous raised rubber lip around the sides and rear edge.  The recessed grilles were replaced by a large, inset louvered plastic grille, needed to accommodate the additional height of the intercooler while the base of the assembly became a wide pedestal mounted through the engine cover and although there were detail changes, the Tea Tray was fitted to 930s (and atmospheric cars with the M491 option) until the retirement of the long-serving (the 1974-1989 911s often called “G Series” although technically that should apply only to the 1974 model year production but such is the visual similarity the use persists) platform in 1989.

Tea Tray on 930 Turbo Cabriolet (left) and Taco on 996.1 GT3 (right)

The Ducktail, Whale Tail and Tea Tray remain the best known of the Porsche spoilers but there were others including the “Swan Neck” but the most photogenic was the “Taco”.  It was introduced on the 911 GT3 (RoW 996.1) and was so admired the factory later made it available as part of an optional aero-kit.  The nickname is of course an allusion to the Mexican culinary staple, the resemblance quite obvious when viewed in profile although it has also been dubbed the “Pacman”.  The 996.1 GT3, production of which was limited to 1868 units, was first displayed at the 1999 Frankfurt Motor Show and was one of the dual-purpose 911s (for road and track, the GT3 badge appearing several times since) and like all the spoilers, the Taco was functional and it needed to be, the 300 lbs (136 KG) downforce generated at the top speed of 304 km/h (189 mph) required to ensure the thing remained in contact with planet Earth.

Spoilers and other aerodynamic aids can be re-purposed.  A young lady with a tea tray (with coffee pot) (left) and laundry hanging on a the wing of a 1969 Dodge Daytona (right).  In period, between stints on the tracks, drivers would hang their sweat-laden racing suits on the wings of Daytonas and Plymouth Superbirds.

Gully

Gully (pronounced guhl-ee)

(1) A small valley or ravine originally worn away by running water and serving as a drainage-way after prolonged or heavy rain.

(2) A ditch or gutter.

(3) In cricket, a position in the off-side field (some 30^o behind square), between point and the widest of the slips (or wicket-keeper if no slip is set); the fielder occupying this position.

(4) In tenpin bowling, either of the two channels at the side of the bowling lane.

(5) To make gullies in the ground or an object

(6) In hydrology, to form channels by the action of water.

(7) In slang, or relating to the environment, culture, or life experience in poor urban neighborhoods; vulgar, raw, or authentic and sometimes used as an alternative to ghetto.

(8) In (US) slang, as gullywasher, an intense, but typically brief rain event, the form dating from 1887.

(9) In Scotland and northern England, a knife, especially a large kitchen or butcher’s knife (the alternative spelling gulley).

(10) In some parts of the English-speaking word, a synonym for valley, especially one heavily wooded; a deep, wide fissure between two buttresses in a mountain face, sometimes containing a stream or scree (although in most traditions gullies are usually dry, water flowing only after heavy rain or a sudden input of water from other drainage systems.

(11) In engineering slang, any channel like structure which is available to be used for some purpose such as ducts or cables (applied to anything from computer motherboards to nuclear reactors).

(12) In engineering, a grooved iron rail or tram plate (mostly UK).

(13) In civil engineering, sometimes used as a descriptor for drop-kerbs, gutters etc.

(14) Of liquid, noisily to flow (obsolete).

(15) In South Asia (chiefly India but known also in Pakistan, Bangladesh & Sri Lanka, an alleyway or side street.     

1530–1540: Etymologists have traced several possible sources of the word and it’s not impossible the word evolved independently in different places.  It may have been a variant of the Middle English golet (esophagus, gullet), from Old French goulet (the French –et ultimately replace by –y), from Latin gula (throat) and the meaning-shift in the Middle English to "water channel, ravine" may have been influenced by Middle English gylle, gille & galle (deep narrow valley, ravine), hence gill for some time being a synonym.   An alternative source from The French has been suggested as goulet (neck of a bottle).  The use is South Asia is more certain, borrowed from Hindi गली (galī) and the Urdu گَلی‎ (galī) with the spelling evolving under the Raj under the influence of English.  It was inherited from Ashokan Prakrit galī and was cognate with the Punjabi ਗਲੀ (galī) / گَلی‎ (galī), the Gujarati ગલી (galī), the Sindhi ڳَليِ‎ / ॻली, the Marathi गल्ली (gallī) and the Bengali গলি (gôli), the Latin callis, the Italian calle and Spanish calle (street, lane or path).  The first reference (in Scottish English) to the knife (the spelling gully or gulley) dates from circa 1575–1585, the origin unknown.  Gully is a noun & verb and gullied & gullying are verbs; the noun plural is gullies.

Historically, a gully was a natural formation of water flows which was usually dry except after periods of heavy rainfall or a sudden input of water from other drainage systems after more remote flooding or the melting of snow or ice.  Over the years the meaning has become less precise and other words are sometimes used to describe what are understood by many as gullies.  The noun ravine (long deep gorge worn by a stream or torrent of water) dates from 1760 and was from the mid seventeenth century French ravin (a gully), from the Old French raviner (to pillage; to sweep down, cascade), and the French ravine (a violent rush of water, a gully worn by a torrent), from the Old French ravine (violent rush of water, waterfall; avalanche; robbery, rapine).  Both the French noun and verb ultimately came from the Latin rapina (act of robbery, plundering (related to rapine and the source of much modern confusion because “rape” was long used in the sense of “pillage” or “kidnapping”)) with sense development influenced by the Latin rapidus (rapid).  Entries for ravine appear in early seventeenth century dictionaries with the meaning “a raging flood” whereas in fourteenth century Middle English, both ravin & ravine meant “booty, plunder, robbery”, this circa 1350-1500 borrowing of the Latin influenced French word.  Dating from 1832, the noun gulch (deep ravine), despite being of recent origin, is a mystery.  It may have been from the obsolete or dialectal verb gulsh (sink in to the soil) or "gush out" (of water), from the early thirteenth century Middle English gulchen (to gush forth; to drink greedily), the most evocative use of which was the mid thirteenth century gulche-cuppe (a greedy drinker).  Despite the vague similarities, etymologists maintain these forms had no etymological connection with gully.  Other words (trench, culvert, crevasse, chasm, notch, chase, watercourse, channel, gutter gorge watercourse etc), even when they have precise meanings in geography or hydrology, are also sometimes used interchangeably with gully.

Japanese manhole covers (マンホールの蓋 (Manhōru no futa)) can be delightful or functional (in a typically thoughtful Japanese manner, some include a locality map with directions) but usually provide little inspiration for those designing wheels.

In the nineteenth century, Modern German picked up Gully from English in the sense of “a road drain, a drainage channel” (synonym: Straßenablauf), the covering of a road drain or gully being Ablaufgitter & Ablaufdeckel.  One adaptation quickly coined was Gullydeckel (manhole cover), the construct being gully + deckel, (an untypically economical construct in German given the usual forms for manhole were Kontrollschacht & Einstiegschacht), an alternative to Kanaldeckel (manhole cover).  Deckel (lid, cap, cover of a container) was an ellipsis of Bierdeckel (beer mat) and also used in humorous slang to mean “headwear, hat” although it was most productive in the formation of compounds with cap in the sense of “an artificial or arbitarily imposed upper limit or ceiling” such as Preisdeckel (price cap), the common synonym being Deckelung (capping).

A German Gullideckel (left), a Mercedes-Benz “Gullideckel” aluminum wheel (centre) and a 1988 Mercedes-Benz 560 SL so equipped.

The alternative spelling was Gullideckel and it was this which was picked up to describe the design of aluminum wheel adopted by Mercedes-Benz in 1982.  The reference is explained by the wheel’s design bearing a similarity to that typically used by German manhole covers although Mercedes-Benz dryly explained their concerns were less artistic or a tribute to Teutonic urban hydrology than a reflection of the imperatives of optimizing the air-flow required for brake cooling and a reduction in drag compared to their earlier, long-serving design.  It was in the 1980s that the greatest improvement in the aerodynamic efficiency of cars was achieved and wheels were a significant, though often little-noticed part of the process.

Top row: Mercedes-Benz C111 at Hockenheimring, 1969 (left).  The C111 series was originally a rolling test bed for the evaluation of Wankel engines ad it was on the C111 that the new wheels (then called “Premier”) were first shown although no production versions (centre) were ever made so wide.  The 6½ inch versions were first used on the 450 SEL 6.9 (right).  Bottom row: A bundt cake tin (left); like the wheels, the tins are made from aluminum but are always cast or pressed, not forged.  A ginger bundt cake (centre) and a lemon blueberry bundt cake with vanilla icing (right).      

The earlier design used by Mercedes-Benz was apparently not inspired by any existing product but the public soon found nicknames.  Introduced in 1969 and soon an option throughout the range except du Grosser (the 600 (W100) 1963-1981) until 1986, the factory initially listed them as the “Premier Wheel” (ie the “top of the range”) but in the public imagination the nicknames prevailed.  First informally dubbed "Baroque" because of what was then considered an ornate design, the name which endured was “Bundt” an allusion to the popular “bundt cakes”, a circular cake with a hole in the centre and there was certainly some resemblance.  Produced by the Otto Fuchs (pronounced fuks) Company of Meinerzhagen (near Cologne), the early versions were all painted silver (though not clear-coated) and available only in a 14 x 6-inch size, 5½ inch versions soon offered to suit the lower powered cars while in the mid-1970s, production began of 6½ inch versions to handle the tyres fitted to the much faster 450 SEL 6.9 (W116) and 450 SLC 5.0.  Demand for the bundt wheel option grew rapidly, forcing Fuchs to add a line of cast wheels in the same design, the casting process able to achieve both higher volumes and a lower unit cost.  The process of forging aluminum requires great heat and immense pressure (Fuchs used as much as 7,000 tons of force) and realigns the granular structure of the material in the direction of the flow, creating a more homogeneous and less porous micro-structure.  Forging renders aluminum as strong as steel for less weight and provides a notably higher resistance to fatigue and corrosion but the process is expensive.  Fuchs also manufactured small runs of a 15 x 7-inch version and today these are much sought after.  Such is the appeal of the style, specialists in the US have fabricated versions in both a 16 & 17-inch format although, being very expensive, they remain rare.  Today, factories often offer a variety of designs of aluminum wheels with some styles available only briefly but for over fifteen years, the bundt was the only one offered.

Fuchs wheels on Porsche 911s in matt metal, (left), polished (centre) & with painted highlights.  The Porsche pedants chide any restorer who finishes the wheels in any manner than that originally done at the factory.  

A half a decade earlier, Mercedes-Benz neighbors in Stuttgart had also designed an aluminum wheel.  Porsche had planned a 1965 release for its new 911 S, at that time the fastest, sportiest version of the 911 which had been on sale since 1963 and the distinctive five-spoke shape would first be sold in 1966 and remain on the option list until 1989, the popularity so enduring it’s since been reprised more than once.  Distinctive though it was, there were really only two requirements for the new wheel: It needed to be durable and light, strong enough to endure the stresses the higher speed of the 911 S and delivering a reduction in un-sprung mass weight significant enough to enhance handling.  The design target was an aluminum wheel which weighted 3 kg (6½ lb) less than steel wheel of the same dimensions.

Porsche had also used the Otto Fuchs Company, impressed by the foundry having developed a new manufacturing process which, instead of using a cast rim, manufactured it in one piece from an alloy made of 97% aluminum with the remainder composed mostly of magnesium, silicon, manganese & titanium, the technique still used by the company today.  The five-leaf clover design was based on nothing in particular and was done in-house by Porsche, the only change from the original prototype apparently a smoothing of the scalloped shape which first adorned the spokes.  The design proved adaptable, the original 15 x 4½-inch wide wheels growing eventually to eight inches when fitted to the rear of the 911 Turbo (930), the additional rubber required to tame the behavior of a machine which some labeled the “widow maker”.  Later designs have offered various specific improvements but none has matched the charm of the original and Fuchs have continued its manufacture for later model 911s, some in larger diameters to accommodate advances in suspension geometry and tyres.

Gas-burners: Lindsay Lohan using gas-burner as improvised cigarette lighter, Terry Richardson (b 1965) photo-shoot, 2012 (left), two of Mahle GmbH’s magnesium wheels (centre) and a 1971 Porsche 911 T so equipped.

The five spoke wheel is a matter of particular interest to the originality police in the Porsche collector community and great attention is paid to date-stamping and paint, it being very important that where appropriate the wheels variously should either be unpainted or painted in a certain way in a certain color.  Deviations from what the factory did are not tolerated.  Although five-leaf clover design never picked-up an association with other circular shapes like manhole covers or cakes, there was another Porsche wheel which did.  Produced by Mahle GmbH and quickly dubbed “gas-burners”, they were available on the 911, 912 & 914-6 between 1970-1972 and although generally not thought as attractive as Fuchs’ creations, the “gas-burners” have a cult following based on pure functionality: Pressure cast in magnesium and available only in a 15 x 5½-inch format, at 4.3 kg (9½ lb) they’re said to be the lightest 15-inch wheel ever made, more svelte even than the 15 x 6-inch units Michelin rendered in glass fibre & resin for the Citroën SM (1970-1975).

Aunger magazine advertisement, 1974.  Not all wheels use an existing circular product as a model.  A style popular in the 1970s, it was known colloquially as the “jellybean”, “slotted” or “beanhole”.