Boss

Boss (pronounced bos or baws)

(1) A person who employs or supervisors workers; a manager; a person in charge of a business or company.

(2) A politician who controls the party organization, as in a particular district (historically most associated with the Democrat & Republican party “machines” in US cities from the mid-nineteenth to the late twentieth centuries and notorious for devious, corrupt or illegal practices and still used in many countries where the US influence was strong, notably the Philippines.

(3) To be master of or over; manage; direct; control; to be a boss.

(4) To order about (used especially if conducted in an officious manner.

(5) To be too domineering and authoritative (often as “bossy”).

(6) To ornament with bosses; to emboss.

(7) On slang, first-rate.

(8) In botany & zoology, a protuberance or roundish excrescence on the body or some internal organ of an animal or on a plant.

(9) In geology, a knob-like mass of rock, especially an outcrop of igneous or metamorphic rock, applied particularly to the uppermost part of an underlying batholith.

(10) An ornamental protuberance of metal, ivory, etc; a stud.

(11) In architecture, an ornamental, knob-like projection, as a carved keystone at the intersection of ogives.

(12) A stone roughly formed and set in place for later carving.

(13) In bookbinding, one of several pieces of brass or other metal inset into the cover of a book to protect the corners or edges or for decoration.

(14) In engineering, a small projection on a casting or forging appearing on a machine or fitting; an area of increased thickness, usually cylindrical, that strengthens or provides room for a locating device on a shaft, hub of a wheel etc

(15) In nautical use, a projecting part in a ship's hull or in one frame of a hull, fitting around a propeller shaft.

(16) In plumbing, to hammer (sheet metal, as lead) to conform to an irregular surface.

(17) In dialectal (northern English) use, a familiar name for a calf or cow.

(18) In dialectal (Scots) use, hollow.

(19) As the abbreviation BOSS, the Bureau of State Security; an apartheid-era branch of the South African security police which existed 1969-1980.

(20) In informal use (particularly in India and in Multicultural London English (MLE)), a term of address to a man, not of necessity related to employment, status or other relationships but also as an alternative of “guv” or “guvnor”.

(21) In video gaming, an enemy, often at the end of a level, that is particularly challenging and must be beaten in order to progress (from the Far East), from the Japanese ボス (bosu).  In Swedish, the related form is slutboss (the construct being slut (end) +‎ boss (boss) and synonymous with sista bossen).

(22) In (allegedly) humorous use, one’s wife.

(23) In archery, a target block (now constructed usually of hard foam but historically made of hay bales), to which a target face is attached.

(24) In building, a wooden vessel for the mortar used in tiling or masonry, hung by a hook from the laths, or from the rounds of a ladder.

(25) In hydrology, a head or reservoir of water.

(26) A hassock or small seat, especially made from a bundle of straw (obsolete).

1250–1300: From the Middle English bos, bose & boce, from the Anglo-French boce (lump, growth, boil), from the Old French boce (lump, bulge, protuberance, knot), from either the Frankish bottja or the (unattested) Vulgar Latin bottia, both of uncertain origin but probably related to the Italian bozza (metal knob, swelling) and the Proto-Germanic bautaną (to hit, strike, beat).  By the turn of the fifteenth century, it was used in the sense of “to swell out; to beat or press into a raised ornament” and by the 1620s as “to furnish with bosses”.  The word survives as the Modern French bosse.

The (highly nuanced) use to mean “a supervisor” dates from the 1640s and was a creation of US English, from the Dutch baas (master, foreman).  The Dutch baas was from the Middle Dutch baes (master of a household, friend), from the Old Dutch baso (uncle, kinsman), from the Proto-West Germanic baswō, from the Proto-Germanic baswô (uncle) which may have been from the Proto-Germanic ba- or bō- (father, older male relative), the source also of the English terms babe, boy, bub & bully. It was cognate with the Middle Low German bās (supervisor, foreman), the Old Frisian bas (master), hence the Saterland Frisian Boas (boss) and the Old High German basa (father's sister, cousin) from which German gained Base (aunt, cousin) (although not all etymologists are convinced there’s a link with the Old High German basa).  The etymology seems to suggest the word originally was a term of respect used to address an older male relative (usually an uncle but also even others considered “honorary uncles”).  Later, in New Amsterdam (the old name for New York), it came to mean “a person in charge who is not a master (in the legal sense of ownership) and the representation of the Dutch -aa- by the English -o- is attributed to the older, unrounded pronunciation of this letter, which remains prevalent in North America and parts of Ireland, but in the colonial era existed also in some British accents.  The Dutch form baas is in English from the 1620s as the standard title of a Dutch ship's captain and the rapid adoption in the US may have reflected the popularity of a word which avoided the slavery implications of “master”, something never necessary in England where the terms master & servant were included in legislation into the twentieth century.

Lindsay Lohan released the track Bossy in May 2008.  It was classified as electropop & dance-pop and was about a bolshie woman; it’s thus considered autobiographical.

The slang adjective meaning “excellent; first rate” was in use at least by the 1880s although it faded from use before being revived (perhaps independently) in the 1950s, in the slang of US youth and jazz musicians.  The adjective bossy was developed from the noun and in the 1540s meant “a swelling, projecting and rounded, decorated with bosses” The meaning “domineering, fond of ordering people about” was first noted in 1882.  The use as the Scots adjective meaning “hollow; empty” dates from the early sixteenth century and is of obscure origin.  The northern English dialectal form which was a familiar name for a cow or calf was first documented in 1844 and was from the earlier dialectal form buss (calf) which is of uncertain origin but is thought almost certainly from the Latin bōs cow (ox), from the primitive Indo-European root gwou- (ox, bull, cow).  The verb emboss (to ornament with raised work) dated from the late fourteenth century and was from the Old French embocer (and thus a similar form to embocieure (boss, stud, buckle), from an assimilated form of the construct en- (in, into) + boce (knoblike mass).  The synonyms, depending on context includes administrator, chief, chieftain, director, employer, executive, leader, owner, supervisor, capital, champion, fine, fly, top, controller (or comptroller), executive, foreman, foreperson, head, honcho, head honcho, overseer & superintendent.  Boss is a noun, verb & adjective, bosser & bossiness are nouns, bossed is a verb, bossing is a verb & adjective, bossily is an adverb and bossy is an adjective; the noun plural is bosses.

The Boss Mustangs

During the initial development phase in 1968-1969, the project code for Ford’s Boss Mustang programme was the bland “SKO” (Special Mustang, Kansas City Operation).  According to industry legend, secrecy was maintained by instructing the staff working to the prototype to respond to any questions about the vehicle by saying “it’s the boss’s car”.  Whether or not that’s true, it was the project's boss (the chief engineer) who suggested the “BOSS” name formerly be adopted as the official model designation and although the management team initially responded with restrained enthusiasm, the production cars emerged as 1969 models as the “Boss Mustang” and the response was so good it was continued for three seasons and the corporation has over the decades revived the name, both in the US and Australia.

1969 Ford Mustang Boss 302.

The first of the line was the Boss 302, introduced in 1969.  The Boss 302 existed solely to ensure Ford would have a competitive entry for the SCCA’s (Sports Car Club of America) Trans-Am series which was conducted in two classes, one for cars with engines up to 2.0 litres (122 cubic inch) and one with a five litre (305 cubic inch) limit, the Mustangs campaigned in the latter.  Ford had enjoyed early success in the series but Chevrolet’s Camaro had prevailed in 1968, its Z/28 package optimized for the road circuits on which the events were conducted and Ford’s initial response had been the “Tunnel Port” engine, developed with cylinder heads cleverly designed for top end power at the expense of just about everything else.  The tunnel ports certainly delivered the power but the high-revving engines proved chronically unreliable although the debate about whether this was a fundamental flaw in the design or some laxness in the preparation has never been resolved and their performance in competition over the decades since does suggest that if assembled and maintained with the appropriate care, they’re a robust unit.

1970 Ford Mustang Boss 302.

However, noting the care with which the Z/28 had been configured, Ford decided to follow their example and conceived the Boss 302 Mustang with a bucket of money in one hand and plans of the Trans-Am’s circuits in the other.  Added to the robust 302 cubic inch (4.9 litre) Windsor block were more modern cylinder heads with canted valves, emulating the approach adopted for the new Cleveland (335) series V8.  Unlike the highly strung tunnel ports, the Boss 302 had a wider power band and more low-speed torque, characteristics more suited to the race tracks.  To ensure success, 1000 identical examples had to be sold but such was the demand 1628 were built, all fitted with the modifications to the brakes and suspension required to provide the basis of a successful race car.  Despite it all, the Camaro again won the series in 1969 but the Boss 302 returned to take the title in 1970 and that year's model proved even more popular with 7013 sold.

1969 Ford Mustang Boss 429.

The homologation of the Boss 302 for competition was a simple matter in that it was a complete package, as required under SCCA rules.  The Boss 429 Mustang was different in that it was only the engine which was required to be built is sufficient numbers, 500 required for them to be used on the NASCAR (National Association of Stock Car Auto Racing) ovals & circuits and with 857 built in 1969 (a further 499 1970 models were also produced), the threshold was reached.  The Mustang was not used in NASCAR but such was the symbiotic relationship between the sanctioning body and the manufacturers that Ford was granted permission separately to homologate the platform and the powerplant, the intermediate Torino Talladegas (actually to be used) with their aerodynamic enhancements produced in their run of 500 (which may or may not have been produced in time) but fitted with ordinary engines.  So cooperative was NASCAR that they even nudged their capacity limit to 430 cubic inches to accommodate Ford’s new engine which was just slightly larger than the previous 7 litre mark.  That’s sounds needlessly complicated and was (as well as being expensive) but the market research suggested that while demand would exist for at least 500 Boss 429 Mustangs, 500 Ford Torinos & Mercury Cyclones (the models actually used in competition) with the big engine might be hard to shift.

Boss 429 in 1969 Mercury Cyclone, 1971 Daytona 500.

The decision was thus taken to put the Boss 429 in the pony car but it was not a simple task and one certainly not appropriate for Ford’s high volume, mass-production lines so the job was out-sourced to a third party which received a series of deliveries in two parts, (1) batches of complete cars and (2) crates containing engines.  The task was to remove the existing engine (to be returned to the factory), make the necessary modifications to the body and suspension, fit the Boss 429 and attend to all the small details which made the cars into regular production models.  The concept was simple but the wide engine wouldn’t fit without significant changes and although Ford never revealed how much of a loss it made on each Boss 429, few estimates have figured it was less than a four figure sum per unit.  Still, they must have been pleased with the investment because the engine did the job in NASCAR and the aura surrounding the Boss 429 Mustang has grown over the years.  That however took a while because it wasn’t wholly suited to life on the street or the drag-strip and was at its happiest only when on a racetrack at full throttle, breathing in through a very big carburetor and out through free-flowing tubular headers.  The professionals however learned quickly, the pioneers of the then still novel business of turbo-charging finding the Boss 429 took to forced aspiration like few others.

1971 Ford Mustang Boss 351.

Times had changed by 1971.  It was obvious to all the crazy era of the muscle cars was in its last days and both the Boss 302 and 429 were retired, the tasks of homologation done.  There was however a Boss 351 Mustang, a machine with no pretensions to any real link with competition although it was dressed up to look the part.  A development of Fords 335 (Cleveland) series, it's an engine at which the purists have sometimes looked askance because it lacked the extensive lubrication enjoyed by the Windsor which underlay the Boss 302s but for street use it's certainly more than adequate.  The lack of pedigree has meant the Boss 351 has never enjoyed the stellar reputation of its predecessors and its lines doubtlessly contributed to that, the new body bigger and heavier, lacking the litheness of the earlier years.  Even when standing still however the thing undeniably had a presence although the dramatic roofline (said to be highly aerodynamic) did restrict rearward visibility, the glass close to horizontal.

1971 Ford Mustang Boss 351.

It may not have enjoyed the racing history of the Boss 302 or possessed the thoroughbred lineage of the Boss 429 but lurking behind all the thunder, it ranks with the best of the Chrysler 340s as one of the most under-estimated engines of the era and contemporary reports were impressed with the performance, noting it could run with machines fitted with engines sometimes 100 cubic inches (1.6 litres) larger while at the same time delivering a better driving experience, the smaller, lighter weight over the front wheels making it rather more nimble although that was a relative phrase; the Boss 351 was no Lotus Elan.  The engine technically was Ford’s short-lived 351 HO which would soon fall victim to the increasingly restrictive emission regulations but demand was anyway falling; having sold over 7000 Boss 302s in 1970, only 1806 Boss 351s were made.

Lindsay Lohan, Bossy (2008)

Demi, Hemi & Semi

Demi- (pronounced dem-ee or dem-ahy)

Of less than full size, status, or rank.

Circa 1350s: From the Middle English demi (half, half-sized, partial), from the twelfth century Anglo-Norman demi (half), from the Vulgar Latin dimedius, from the Classical Latin dīmidius, the construct being dis- (apart; in two) + medius (middle).  The French demi which English borrowed was a combining form which existed as noun, adjective, and adverb.  It appears in loanwords from French meaning “half” (demilune), “lesser” (demitasse), or sometimes used with a pejorative sense (demimonde) and, on that model, is also prefixed to words of English origin (eg demigod).

Hemi- (pronounced hem-ee)

A combining form meaning “half,” used in the formation of compound words (eg hemispherical, hemimorphic, hemicardia et al).

Pre 900: From the Middle English hemi from the Ancient Greek prefix ἡμι- (hēmi-) (half), from ἥμισυς (hḗmisus) (half).  It was cognate with the Classical Latin sēmi- and, as a word -forming element meaning "half", was a Middle English borrowing from the Latin hemi- which was taken directly from the Greek hēmi- (half) from the primitive Indo-European semi-, source also of the Sanskrit सामि (sāmí), the Old High German sami- (half) the Old English sam- and others, all soon denoting a partial or imperfect condition as well as the classically correct “half”.

Semi- (pronounced sem-ee)

(1) Half (strictly speaking) as in “semicircle”.

(2) In informal use, a proportion of something less than the whole.

(3) In English, a combining form or prefix (sometimes hyphenated) appended to words of any origin, usually with the senses of “partially,” “incompletely” or “somewhat” (eg semi-final, semi-trailer, semiautomatic, semi-articulated, semi-detached et al).

1400s: From the Middle English semi, from the Latin sēmi- (half).  It was connected with the Old English sōm- & sām- (half) (and related to the modern dialectical sam-), the Old High German sāmi-, the Sanskrit सामि (sāmí) and the Ancient Greek hemi-.  Ultimate root was the primitive Indo-European sēmi.

The word-forming prefixes semi-, hemi-, and demi- all began life meaning “half” but have evolved to mean other things too and exist also not just as prefixes but as stand-alone forms.  As a prefix, there appears to be 951 words with a “semi-” prefix, around 215 with a “hemi-” while a “demi” is appended only to 172, and, although it’s never been a rule, because of the origins, “demi-” is probably best paired with words of French origin, whereas “semi-” is a more natural fit with words with a Latin root.

Semi- may refer to something happening more than once (usually twice) within a certain time and is probably most familiar as “semi-final” to describe the matches of a competition which will determine the finalists.  In English it was used first to mean “half but became soon attached to concepts impossible to quantify (eg semi-abstract; semi-permanent) and thus came to mean also “virtually” or “somewhat.”

Hemi- is often employed in the hard-sciences.  It’s less commonly used than semi-, the association with the technical language of fields such as physics, chemistry, mathematics, biology and anatomy tending to mean it’s applied with more exactitude but even here, practices of use have produced anomalies.  In general use, it’s perhaps best known as a descriptor of the shape of the combustion chamber of certain internal combustion chambers to the extent of “Hemi” the noun being a Stellantis (the holding company of which Chrysler is now a part) trademark, even though many of the engines the company now market as such use a different shape.

Lindsay Lohan in demi-cup bra, photoshoot by Terry Richardson (b 1965) for Love Magazine, 2012.

The demi-cup style is most associated with the “push-up” bra of which Playtex's Wonderbra is the best known.  As the name implies, a demi-cup bra is one where the fabric covers rather less than the mainstream “full cup” bra although not necessarily half, some more revealing than others and the demi-cup is designed better to display the cleavage but need not do so in the exaggerated manner of the push-up bra, almost all of which use a kind of demi-cup.   Many demi-cup bras don't use the push-up engineering though they typically include most of the familiar components (padding, underwires etc).  A variation of the demi style is also inherent to the “plunge bra”, designed to accommodate garments with a low cut but why the industry settled on demi-cup rather than semi-cup isn't known and the term isn't universal, some manufacturers preferring "half cup".  Still, it's definitely all about the cup and to be regarded as a demi bra, it should be constructed with partial cups which cover between 50-75% of the breast and coverage should be the same all across the bra (similar to a balconette bra) as opposed to Plunge or T-Shirt bras where there's a slight dip in the middle.  Additionally, most demis use an underwire in a slightly wider than usual U-shape, evenly arched.

Demi- is used suggest something of less than full-size or status although it doesn’t of necessity imply something inferior.  In English, it’s the rarest of the three forms and, in English, was first used in heraldry, where things like demi-angels, demi-lions, demi-horses were applied to escutcheons.  It also held sway in certain niches such as the military (demi-brigade) and fashion (demi-cap; demi-lustre; demi-worsted) and coach-building (demi-limousine).  Of late, it has absorbed the sense of “virtual” as well as “lesser” and is quirky too: A demigod, while certainly not quite the real thing can be applied with either negative or positive connotations.

1969 Ford Torino Talladega.

Although modest by comparison with Chrysler’s radial Daytona and Superbird, Ford’s aerodynamic enhancements to the Torino proved surprisingly effective.  Actually, so good was the Talladega that when the sleek-looking replacement was released, the racers found it was slower and kept their Talladegas in service as long as they were eligible.  Ford had produced enough of their Fairlane-based Torino Talladegas to run them on the NASCAR circuits but needed to sell five-hundred cars with their new BOSS 429 V8 engine to reach the homologation threshold.

A helpfully inserted quirk in the NASCAR rules allowed them to put the engine in the Mustang rather than the larger Torino which would actually be used for competition.  That was good because the BOSS 429 Mustang attracted great interest and Ford sold more than enough to comply, something few were confident of doing with the Torino.  Additionally, and again helpfully, any doubts about the eligibility of the new engine had been resolved when NASCAR nudged the displacement limit by a couple of cubes.  The capacity limit of 428 cubic inches (7014 cm³) had been imposed in 1963 after Ford, caught cheating using a specialized aerodynamic part called a Starlift roof, sent one of the now-banned cars, fitted with a 483 cubic inch (7.9 litre) engine, to the Bonneville salt flats and set a number of international speed records.  NASCAR was watching what had started out as a "stock car" racing series in which essentially amateur teams could on a good day compete with the professionals, turn into a place where to be competitive, what was required was a big-budget operation, supported by the factories making available exotic and expensive components which had no purpose except on a race track.  Knowing where that 483 would be heading, NASCAR cracked down.  There would be plenty of other squabbles about engines during the 1960s but by the time the BOSS 429 came along, all was forgiven, NASCAR raising the limit to  430 cubic inches (7046 cm³).

1969 Ford Mustang Boss 429.

That was also bad because the Boss 429 was a big lump designed to fit in the wide-bodied intermediates and such was the task to shoehorn it into the narrower Mustang that the job had to be out-sourced to a specialist contractor because inserting the labour-intensive programme into the highly-structured Ford production-lines would have been too disruptive.  Thus, cars were delivered to the contractor which also received the 429 engines in crates.  Destined originally to be fitted with the physically smaller 428 SCJ engines, it was no small task to make the 429 fit, the shock towers being moved outwards along with the upper and lower control arms and stiffer springs were fitted and, surprisingly, it actually worked out quite well.  Although the bulky heads made the 429 a wide piece of machinery, they were made of aluminum and the total package was barely heavier than the all-iron 428 and some even included a few magnesium components which were lighter still.  The changes made had the effect of moving the front wheels further apart and increasing their negative camber and this gave the Boss 429 the best handling and road manners of any big-block Mustang although, it was still a front-heavy thing and clumsy to drive at low speed.  Re-locating the battery to the boot helped weight-distribution a little but none of the changes were ever going to make it behave like a Lotus Elan.

1969 Ford Mustang Boss 429.

However, one implication of things being such a tight fit was that there wasn’t the space to fit a free-flowing exhaust system so in the Mustang it was never possible for the engine to breathe as deeply as it did in the big NASCAR stockers and knowing this, Ford made no attempt to configure the it for maximum output, the carburetor smaller than those used on the Boss 302 and Boss 351.  Nor were the internal components assembled in a specification consistently intended to maximize performance, some built (supposedly in error) with a valve train which limited engine speed and the project anyway was a homologation exercise designed to sell the requisite number of parts required to qualify them for competition although, despite the low production spread over only two years, there were three distinct variations.  The first few hundred (S-code) units used heavy connecting rods secured with ½ inch (13 mm) bolts whereas the rest of the 1969 run and most built in 1970 (T-code) were fitted with lighter pieces and ⅜ (9 mm) bolts and initially, the early T-code engines carried over the hydraulic lifters from the S-code but production soon switched to a solid lifters with a somewhat more lumpy camshaft, the magnesium valve covers at the same time replaced with units cast in aluminum.  Finally there was an edition (A-code) which appeared in the last few of those built in 1970 and it varied from the T-series specification only in in some changes to the plumbing associated with what was still a quite rudimentary anti-pollution system.  Whatever its variations, a Boss 429 Mustang was what it was.

The shotgun ports.

It was also what it was not.  Expectations were high and, on paper, not unreasonable because the notion of putting a genuine seven litre racing engine in something as (relatively) small as the Mustang did hint at something special but, with the strangled engine, although quick, it wasn’t a cataclysm on wheels and the opposition was quicker still.  One of the issues was the fundamental design of those exotic heads.  Nick-named shotgun because the intake and exhaust ports reminded many of the double-barrels of a 12-gauge (although each was large enough almost to swallow a tennis ball), they worked admirably in the Talladegas at high-speed where they were matched with a big carburetor and free-flowing exhaust system.  On the street however, the big shotgun ports rarely saw sustained high-speed running and their sheer size meant the fuel at low speed didn’t achieve the flow-rate necessary for the low-end response needed on the street or strip.

1969 Boss 429 on stand with open exhaust headers.

Prior to release there was talk of quarter-mile runs somewhere in the twelve second range but in reality, no stock Boss 429 ever went quicker than low fourteens, enough to put it in the upper echelon of the muscle car era but there were those who expected more.  More did come, as initially disillusioned engine builders began to understand what it responded to, it became for decades one of the dominant forces in drag-racing, the shotgun ports meaning it took to forced aspiration like few engines, twin-turbocharged Boss engines able to generate thousands of horsepower.

1970 Ford Mustang Boss 429.

So it was quite a legacy and the surviving Mustangs now sell for as much as US$250,000.  Although Ford was compelled to build only 500, 857-odd were sold in 1969 and 499 in 1970 so it’s a bit of an oddity, quite a rarity yet almost mass-produced compared with some of the limited production machines of the muscle car era and such is the allure that there are companies now producing reproductions of the famous heads, modified slightly to fit regular production blocks.  It’s never been known how much money Ford lost on each Mustang it sold but, fitted with the famous Holley Dominator 1150 CFM carburetor and open exhaust headers suited to an engine happiest running at full throttle, the BOSS 429 did its job on the circuits and the company seemed happy with the investment although its life as a flag-bearer would be short, motorsport soon to be neglected as a changing world and a onrush of legislation demanding compliance needing the resources the circuits soaked up.

The semi-hemi combustion chamber.

As well as being nick-named the shotgun, it was also called the semi-hemi.  The BOSS 429’s combustion chambers weren’t actually hemispherical but they tended towards the shape (and the ones used in the race cars sometimes were).  Although Ford apparently would have preferred to have them known as a "blue crescent", it didn't catch on and, there being no obvious word in use to describe what they looked like, they came to be known as semi-hemi.  Musicologists had already gone one better than Ford.  Noting that English had contrived to borrow three words from Antiquity in order to have three prefixes meaning “half”, they invented hemidemisemiquaver to describe a sixty-fourth of a note (ie a half of a half of a half of an eighth note), a coining from that year of semi-revolutions: 1848.

Gestapo

Gestapo (pronounced guh-stah-poh or guh-shtah-poh (German))

(1) A branch of German police under the Nazi regime (1933-1945) comprising various sections.

(2) A critical descriptor of any organ (usually) of a state which to some degree resembles Nazi Gestapo, especially in the brutal suppression of opposition (often initial lower-case).

(3) By extension, any oppressive force, group or tactic.

1933: An abbreviated form of the German Geheime Staatspolizei (the construct being Ge(heime) Sta(ats)po(lizei)); literally “secret state police”.  Gestapo is a proper noun.

A typically German abbreviation

It’s an urban myth that Hugo Boss designed the uniforms of the Gestapo.  The field officers of force didn't wear uniforms and in that sense operated in the manner of police detectives while some administrative (district) staff wore much the same garb as their SS equivalents.  When operating in occupied territories under wartime conditions, Gestapo wore the same field grey as the SS with a few detail differences in the insignia.  Hugo Boss was one of a number of companies contracted to produce the uniforms of the SS (Schutzstaffel (literally "protection squadron" but translated variously as "protection squad", "security section" etc)).  The SS began (under different names) in 1923 as a party organization with fewer than a dozen members and was the Führer's personal bodyguard.  The SS name was adopted in 1925 and during the Third Reich evolved into a vast economic, industrial and military apparatus more than two million strong to the point where some historians (and contemporaries) regarded it as a kind of "state within a state".  Of the SS, that's a more accurate description than of many of the apparatuses of the party and state but it was a feature of the Nazi period (not well-understood until after the war) that the internal dynamic was one of a permanent state of institutional struggle for dominance, reflecting Hitler's world view.  Post-war analysis by economists revealed the extent to which this system created structural inefficiencies.

The meme-makers found Hugo Boss's corporate history hard to resist.

The investigative & operational arms of Gestapo comprised the Sicherheitspolizei (SiPo; Security Police) and the Kriminalpolizei (Kripo; Criminal Police), the final structural shape achieved in 1936 when Heinrich Himmler (1900–1945; Reichsführer SS 1929-1945) was granted control of all police forces in Germany, this having the general effect of formalizing the all forces branches of the Himmler’ apparatus.  It was a reward for Himmler’s role in the Nacht der langen Messer (Night of the Long Knives), also called Unternehmen Kolbri (Operation Hummingbird), the bloody purge between 30 June-2 July 1934, when the regime carried out a number of extrajudicial executions, ostensibly to crush what was referred to as "the Röhm Putsch".  The administrative change was notable for marking the point at which control and enforcement of internal security passed from the state to the party, something reinforced in 1943 when Himmler was appointed Interior Minister.

The Gestapo was in 1946 declared a “criminal organization” by the international Military Tribunal (IMT) conducting the first Nuremberg Trial (1945-1946) and although the idea of an organization being criminal seemed novel to many, there were precedents.  Under the Raj, the British India Act (1836) provided that if a man was proved to be a member of the Thuggee (the Thugs, a group of professional robbers and murderers who strangled their victims), regardless of whether his conduct disclosed any actual offence, he might receive a life sentence with hard labor and in laws were passed in the US declaring the KKK (Ku Klux Klan) criminal, a model used in 1919 by the state of California to outlaw “criminal syndication”.  Under Soviet law, someone could even be deemed a member of some organization, even if they didn’t actually belong to it, something of a Stalinist companion the crime of “unspecified offences”.  Germany too had “a bit of previous” in the approach, the Weimar Republic (1918-1933) making it a crime to belong to any “anti-government secret organization”, in 1923 gazetting the Communist Party, the National Socialist Party (the Nazis) and the German People’s Freedom Party among the proscribed.

Remarkably (commented upon even at the time), the Orpo (Ordnungspolizei (Order Police, the “policemen” in the usual sense of the word)) and the Kripo weren’t included in the indictment on the basis they remain “civilian organizations”.  In the trial, the defense raised a number of technical points about the state of German law operative at the time the events being judged transpired and the court accepted some of these but anyway on 30 September 1946 ruled the Gestapo a criminal organization, thus implicating all members (excluding only some clerical & ancillary staff and those who had ceased to be employed prior to 1 December 1939.  In legal theory, this meant all operational SiPo staff active after 1 December 1939 could individually have been indicted in accordance with the available evidence and the expectation was that at least those most senior or accused of the more serious crimes would have faced trial.  However, there was no follow-up “Gestapo” trial, “punishment” limited to those Gestapo staff held in Allied internment camps, almost all of who were released after three years.  Although the Allied Control Commission (ACC) which administered occupied Germany allowed local courts to conduct trials, the number of Gestapo officers tried was comparatively low and even when convicted, the period spent in detention prior to trial was deducted from their sentence, a convention not extended to the seven sent to Spandau Prison after the main trial.  Only in first the Russian Zone (and later as the German Democratic Republic (GDR)) were many Gestapo officers charged and sentenced, almost all released after 1957.

For the majority, like many Germans they were subject to the “denazification” process, the prize of which was to gain a “Certificate of Exoneration”, a piece of paper which appealed to the famously sardonic Berlin sense of humor, soon dubbed the Persilschein (Percil Certificate), an allusion to the popular washing detergent which promised to make clothes “whiter than white”.  Most Gestapo staff received a Persilschein and many either resumed their employment in the new German state and ultimately were credited for pension purposes with their service during the Nazi years.

Politicians often reference the Nazis when attaching their opponents and "Gestapo" is a popular slur. 

Even before World War II (1939-1945) began, the word "Gestapo" had entered the English language as a synecdoche for “police state tactics” and it was in this sense Winston Churchill (1875-1965; UK prime-minister 1940-1945 & 1951-1955) on 4 June 1945 used the word in a broadcast for the UK general election, warning a Labour government (“the socialists” as he called them) would inevitably create such an apparatus to enforce the myriad of regulations and controls they were proposing:

“….there can be no doubt that socialism is inseparably interwoven with totalitarianism and the abject worship of the state. …liberty, in all its forms is challenged by the fundamental conceptions of socialism. …there is to be one state to which all are to be obedient in every act of their lives. This state is to be the arch-employer, the arch-planner, the arch-administrator and ruler, and the arch-caucus boss.

A socialist state once thoroughly completed in all its details and aspects… could not afford opposition.  Socialism is, in its essence, an attack upon the right of the ordinary man or woman to breathe freely without having a harsh, clumsy tyrannical hand clapped across their mouths and nostrils.

But I will go farther.  I declare to you, from the bottom of my heart that no socialist system can be established without a political police.  Many of those who are advocating socialism or voting socialist today will be horrified at this idea. That is because they are short-sighted, that is because they do not see where their theories are leading them.

No socialist government conducting the entire life and industry of the country could afford to allow free, sharp, or violently-worded expressions of public discontent.  They would have to fall back on some form of Gestapo, no doubt very humanely directed in the first instance.  And this would nip opinion in the bud; it would stop criticism as it reared its head, and it would gather all the power to the supreme party and the party leaders, rising like stately pinnacles above their vast bureaucracies of civil servants, no longer servants and no longer civil.  And where would the ordinary simple folk — the common people, as they like to call them in America — where would they be, once this mighty organism had got them in its grip?”

Essex man: Clement Attlee at home, mowing the lawn, Stanmore, Essex 19 April 1945.

It was a controversial statement and even many of Churchill’s Conservative Party colleagues distanced themselves from the sentiments.  The man being accused of planning this police state was Clement Attlee (1883–1967; UK prime-minister 1945-1951) who had served as Churchill’s deputy in the National Government (1940-1945) and was one of history’s more improbable figures to be painted an incipient totalitarian.  The electorate wasn’t persuaded and in the 1945 election Labour won a huge majority of seats in what is described as a “landslide” although the numbers are distorted by the UK’s “first-past-the-post” system; Labour gathered well under half the votes cast but that pattern has subsequently been typical of UK elections and in 1951 the Conservatives actually returned to office despite Labour out-polling them.  Attlee had responded to Churchill’s speech the next day:

“The Prime Minister made much play last night with the rights of the individual and the dangers of people being ordered about by officials.  I entirely agree that people should have the greatest freedom compatible with the freedom of others.  There was a time when employers were free to work little children for sixteen hours a day.  I remember when employers were free to employ sweated women workers on finishing trousers at a penny halfpenny a pair.  There was a time when people were free to neglect sanitation so that thousands died of preventable diseases.  For years every attempt to remedy these crying evils was blocked by the same plea of freedom for the individual.  It was in fact freedom for the rich and slavery for the poor.  Make no mistake, it has only been through the power of the state, given to it by Parliament, that the general public has been protected against the greed of ruthless profit-makers and property owners. The Conservative Party remains as always a class party.  In twenty-three years in the House of Commons, I cannot recall more than half a dozen from the ranks of the wage earners.  It represents today, as in the past, the forces of property and privilege.  The Labour Party is, in fact, the one party which most nearly reflects in its representation and composition all the main streams which flow into the great river of our national life.”

Mach

Mach (pronounced mak, mahk or moch)

A number indicating the ratio of the speed of an object to the speed of sound in the medium through which the object is moving.  Also known as the Mach number; standard abbreviation is M.

1937: Named after Austrian physicist and philosopher Dr Ernst Waldfried Josef Wenzel Mach (1838–1916) who devised the system of speed measurement based on the Mach number. He’s remembered also as the founder of logical positivism, asserting the validity of a scientific law is proved only after empirical testing.  The Mach number is important in the understanding of fluid dynamics and represents the ratio of flow velocity past a boundary to the local speed of sound (Mach 1.0).  It’s most applied to aircraft which are classified:

Subsonic      Mach <1.0
Transonic     Mach =1.0
Supersonic   Mach >1.0
Hypersonic   Mach >5.0

The speed of sound varies, reducing at higher altitudes and if aircraft exceed about 250 mph (400 km/h), air near the aircraft is disturbed, locally changing the density.  This compression, increasing with speed, alters the force on the aircraft and is of great importance to aerodynamicists and structural engineers.  The Mach number is within the science of fluid dynamics because air is fluid and, at hypersonic speeds, the energy of the airframe affects the chemical bonds which hold together the nitrogen and oxygen molecules of air, the heated atmosphere becoming an ionized plasma of gas.  That’s why spacecraft re-entering earth’s atmosphere need to be insulated from high temperatures.  Mach 1 was first exceeded by an aircraft in level flight in 1947 but man-made objects travelling at that speed had long-existed, even before modern ballistics.  The crack of a whip is actually the sonic boom caused by the tip exceeding Mach 1.

The 1969 Ford Mustang Mach 1

Unlike Ford’s later Boss 302 and Boss 429 Mustangs, both powered by genuine racing engines, 1969’s outwardly similar Mustang Mach 1 was a less ambitious machine for street and strip and available with a variety of engines, one of which, thanks to a little Dearborn mendacity, was very competitive in the then highly popular sport of pro-stock drag-racing.  A moniker like Mach 1 is known in contract law as mere puffery, the notion being that in advertising it's possible to assert things which (1) can be neither proven nor disproven or (2), are so absurd no reasonable person would take them seriously.  In 1969 nobody took literally the idea a Mustang could break the speed of sound which was just as well because, at ground level, Mach 1 is 767 mph (1235 km/h) while the top speed of the most powerful Mustang Mach 1 was about 130 mph (210 km/h) or Mach 0.171.  Actually, most were built for drag-racing and geared for acceleration rather than top-end speed so few were capable of more than 115 mph (185 km/h) or Mach 0.151.

1969 Ford Mustang Mach 1 with 428 (FE Series) CobraJet V8.

Hankering for a seven litre (427 cubic inch) version, Ford had added their 427 V8 (FE Series) to the Mustang’s option list for 1968 but none were built (although Shelby did one (or two depending on how such things are counted) and an uncertain number were fitted by dealers pursuant to customer request.  Probably now most remembered from service in the Ford GT40 and the AC Shelby Cobra, the 427 was a famously powerful and robust unit, a trophy winner on circuits from Daytona to Le Mans but was also cantankerous, noisy, an oil-burner and, perhaps most importantly for Ford, expensive to build because of its complex lubrication and cylinder width at the extreme limit of the block’s capacity.  It had also reached the end of its development so, until their new Boss 429 V8 (385 series) became available, Ford hotted-up the previously unremarkable 428 V8 (FE), used until then smoothly to propel big luxury cars like the Thunderbird and LTD.  Pleasingly for Ford, the 428 developed for the Mach 1 gained its increased output from bolt-on bits and pieces and was cheap to produce.

1969 Ford Mustang Mach 1 with 351 (Windsor Series) V8.

Belying its dramatic appearance, the nose-heavy 428 Mach 1 was actually pretty bad at just about everything except the straight-line, quarter-mile sprints at which it excelled though Ford cheated to achieve even these 400 metre-long successes.  Upon its debut in 1968, the National Hot Rod Association (drag-racing’s sanctioning body) allocated vehicles to competition classes on the basis of manufacturers’ declared power-outputs.  Ford claimed the new 428 CobraJet generated 335 horsepower which was quite an understatement, something which allowed it to dominate that year’s national championships.  After that, the authorities cracked down and used their own assessments but by then the 428 CobraJet had done its job and such was the glow of the reflected glory that Ford sold over 70,000 Mach 1 Mustangs in 1969.  Not all were equipped with the big block 428 (a 390 cubic inch (6.5 litre) FE was also available which was about as heavy as the 428 but less powerful) and as road cars, those fitted with the small block (Windsor) 351 cubic inch (5.8 litre) V8 were probably more suited to what most people did most of the time.  Ford produced the Mustang Mach 1 between 1969 and 1978 although the 1974-1978 models are not well regarded, the name revived in 2003-2004 for a small production run and in 2021 the Mach 1 returned to the Mustang range.

Thrust SST, Nevada, 1997.

Almost fifty years to the day after US Air Force (USAF) pilot Chuck Yeager (1923-2020), flying a rocket-powered Bell X-1 aircraft, broke the sound barrier in Earth's atmosphere, RAF Pilot Andy Green (b 1962) set the absolute land speed record (LSR) driving the Thrust SST to a speed of 763.035 mph (1,227.985 km/h) over the stipulated flying mile (1.6 km).  It was the first time a land vehicle officially broke the sound barrier.  Powered by two afterburning Rolls-Royce Spey turbofan engines (the same type used by the British version of the F-4 Phantom II jet fighter) developing a net thrust of some 50,000 lb/f (223 kN) which equates to something in excess of 100,000 bhp (76 MW), the Thrust SST's record still stands.  Weighing a impressive 10 tons, at full throttle the fuel burn-rate was some 4.0 gallons (4.8 US gallons; 18 litres) per second or a tiny fraction of a mile per gallon.  Under the LSR rules mandated by the World Motor Sport Council, for a record officially to be sanctioned, there must be two runs in opposite directions within a certain elapsed time and the council confirmed the speed of sound was exceeded on both runs on 15 October 1997 at Black Rock Desert, Nevada (USA).

The only known photograph of the Anglo-French Concorde flying at Mach 2 (at 25,000 feet (7600 m) Mach 2 is 1,356 mph; 2,186 km/h; 1,185 knots), taken from a Royal Air Force (RAF) Panavia Tornado fighter while over the Irish Sea, April 1985.

Machboos

Lindsay Lohan in an interview published in the November 2022 edition of Cosmopolitan magazine revealed her favorite Middle-Eastern dish to cook was machboos, part of Arab cuisine throughout the region and prepared almost always with chicken with rice and vegetables.  A kind of blend of biryani and risotto, the rice is cooked in the spiced broth of the meat or chicken, melding the spices and ingredients.  Rice is a core component of Arabic cooking and interestingly, in Arabic it’s known as ruz but in the Khaleeji dialect it is aish (life) while in Egyptian Arabic, aish refers to bread, an indication of its centrality to the diet.  Like hummus, between nations (and even families) in the Middle East, there’s often disagreement about how machboos should be prepared, most of the arguments revolving around the bzar (the spice mix) but it’s certainly adaptable, able to be served with achaar (mango or lime pickle), daqoos (a spicy tomato sauce), or yoghurt with chopped cucumber and mint.

Ingredients (for serving 4-6) (from Table Tales: Exploring Culinary Diversity in Abu Dhabi (Rizzoli)).

6 tablespoons plain yogurt, divided
2 tablespoons Emirati bzar spice mix, divided
1½ kg chicken, cut into pieces
500 g basmati rice
80 mls vegetable oil
5 cardamom pods, crushed
1 cinnamon stick
10 black peppercorns
2 whole lumi, cracked
450 grams onions, chopped
1 tablespoon ginger, crushed
1 tablespoon garlic, crushed
4 small green chilies, halved
1 teaspoon turmeric
1 teaspoon cumin
1 teaspoon coriander powder
285 grams canned tomatoes, chopped
1 teaspoon salt
Cooking oil as required
450 grams potatoes, peeled and cubed
Handful of fresh coriander, chopped

Garnish

3 tablespoons cooking oil
2 onions, thinly sliced
85 grams raw cashews
55 grams raisins
Fresh coriander, chopped

Instructions

(1) Combine 4 tablespoons of yoghurt with 1 tablespoon of the bzar in a large bowl.  Coat the chicken and then marinade for 1 hour or longer.  Rinse the rice and soak in enough water to cover for 1 hour; drain.

(2) Heat the oil in a Dutch oven over medium heat. Add the cardamom pods, cinnamon stick, peppercorns and lumi and stir for 2 minutes.  Add the onions and sauté until golden.  Add ginger, garlic, and green chilies and stir for 2 minutes.

(3) Add the chicken and marinade and then cook for a few minutes on each side.  Sprinkle in the turmeric, the remaining bzar, cumin, and the coriander powder.

(4) Add the tomatoes, salt, and 2 cups of water; bring to a boil.  Cover, lower the heat, and simmer for 30 to 45 minutes, until the chicken is done.  Transfer the chicken to a roasting pan.

(5) Remove the cinnamon stick and lumi from the stock and discard.  Add the potatoes and fresh coriander and boil until the potatoes are just tender.  Adjust the stock to get a one-to-one ratio with the rice.  Stir in the remaining yoghurt until dissolved and then add the rice.  Seal the Dutch oven with aluminum foil, cover, and cook over low heat for 30 minutes until the rice is done.

(6) Turn on the oven broiler.  Brush the chicken with some oil and broil until golden.  Serve the rice on a platter with the chicken pieces on top.  Garnish with sautéed onions, cashews, raisins, and fresh coriander.

Garnish Instructions

(7) Place a large skillet over medium-high heat and add the oil and onions; sauté until they are dark brown, but not burnt.  Remove the onions with a slotted spoon and drain on paper towels.  Sauté the cashews in the same oil until golden brown.  Finally, add the raisins during the last few minutes to complete.