Slant

Slant (pronounced slant or slahnt)

(1) A surface, structure, line etc at a slope or in an oblique direction.

(2) In (US) football, an offensive play in which the ball-carrier runs toward the line of scrimmage at an angle (known also as the “slant-in”, a pass pattern in which a receiver cuts diagonally across the middle of the field).

(3) In prosody, as “slant rhyme”, a synonym for the “half rhyme”, “near rhyme” & “quasi-rhyme” (a form of imperfect rhyme in which the final (coda) consonants of stressed syllables (and, in modern English poetry, any following syllables to the end of the words) are identical in sound, but the vowels of the stressed syllables are not.

(4) In typography, a synonym of slash ( / ⟩, particularly in its use to set off pronunciations from other text (not used in IT where the distinctions are between the forward-slash (/) and the back-slash (\) which nerds call respectively the slash and the slosh.

(5) In biology, a sloping surface in a culture medium.

(6) In hydro-carbon extraction, as “slant drilling”, a technique in which the drilling is undertaken at an oblique angle rather than the traditional vertical orientation.

(7) In extractive mining, as type of run in which a heading is driven diagonally between the dip and strike of a coal seam.

(8) In informal use, a glance or look.

(9) To veer or angle away from a given level or line, especially from a horizontal; slope (in to incline, to lean).

(10) Figuratively, to have or be influenced by a subjective point of view, bias, personal feeling or inclination etc (often as “slant towards”, “slanted view” etc); a mental leaning, bias, or distortion (“feminist slant”, “MAGA slant”, “liberal slant”, “business slant” et al).

(11) To cause to slope.

(12) Figuratively, to distort information by rendering it unfaithfully or incompletely, especially in order to reflect a particular viewpoint (more generously sometimes described as “spin” or “massaged”).  The concept is known also as “angle journalism” (the particular mood or vein in which something is written, edited, or published).  In Scots English, the meaning “to lie or exaggerate” captures the flavor.  When used to describe the composing, editing, or publishing of something to attract the interest of a specific sub-group (a “slanted” story), “slanted towards” is necessarily pejorative if used only to suggest something optimized to appeal to a certain market segment or demographic (ie it’s more like “aimed at” or “intended for”).

(13) In slang, as “slant eye” (a racial slur now listed as disparaging & offensive), a reference to people from the Far East (applied historically mostly to the Chinese & Japanese), based on the shape of the eyes.  The variants included “slit eye”, “slitty-eyed” & “slopehead”, all equally offensive and now proscribed.

(14) In painting (art) a pan with a sloped bottom used for holding paintbrushes; a depression on a palette with a sloping bottom for holding and mixing watercolors; a palette or similar container with slants or sloping depressions.

(15) In US regional slang, a sarcastic remark; shade, an indirect mocking insult (archaic).

(16) In US slang, an opportunity, particularly to go somewhere (now rare).

(17) In historic Australian colonial slang, a crime committed for the purpose of being apprehended and transported to a major settlement.

Circa 1480s: From the Middle English –slonte or -slonte, both aphetic (in phonetics, linguistics & prosody, “of, relating to, or formed by aphesis” (the loss of the initial unstressed vowel of a word)) variants of aslant, thought to be of Scandinavian origin.  The other influence was probably the earlier dialectical slent, from the Old Norse or another North Germanic source and cognate with the Old Norse slent, the Swedish slinta (to slip) and the Norwegian slenta (to fall on the side), from the Proto-Germanic slintaną (which, in turn, was probably in some way linked with aslant.  Slant & slanting are nouns, verbs & adjectives, slanted is a verb & adjective, slantish is an adjective, slantwise is an adjective & adverb and slantingly & slantly are adverbs; the noun plural is slants.  The pleasing adjective slantendicular is non standard and presumably proscribed in geometry and mathematics because it's an oxymoron; it’s a portmanteau word, the construct being slant + (perp)endicular.  It may be useful however in commerce or engineering where it might be used to describe something like a tool with a shaft which at some point assumes an oblique or skewed angle.   So it’s there to be used and slantendicular should be applied to stuff which is neither wholly nor fully slanted and in architecture, such structures are numerous.  In commerce, it could be used as a noun.

The noun slant by the 1650s was used to mean “an oblique direction or plane” and began in geography & civil engineering (of landforms, notably ski-slopes), developed from the verb or its adjective.  The now familiar (in the Fox News sense) meaning “way of regarding something, a mental bias” dates from 1905 while the derogatory slang sense of “a person of Asian appearance” came into use some time in the 1940s, a direct descendent from the earlier "slant-eyes", documented since 1929.  The verb slant is documented since the 1520s in the sense of “obliquely to strike (against something)”, an alteration the late thirteenth century slenten (slip sideways), the origin of which is murky but etymologists have concluded it came (via a Scandinavian source (noting the Swedish slinta (to slip)) and the Norwegian slenta (to fall on one side), from the Proto-Germanic slintanan.  The intransitive sense of “to slope, to lie obliquely” was in use by the 1690s, while the transitive sense of “to give a sloping direction to” had emerged by the early nineteenth century.  As early as the late fifteenth century forms were in use as an adverb, the adjectival use attested from the 1610s.  The technical use in literary theory as “poetic slant rhyme” was first used in the mid 1920s (assonance or consonance) although such lines had appeared for centuries, used sometimes deliberately as a device, sometimes not.  In the following stanza by English poet Peter Redgrove (The Archaeologist, published in Dr Faust's Sea-Spiral Spirit (1972)), the second and third lines contain a form of slant rhyme while the first and fourth have pure rhymes:

So I take one of those thin plates
And fit it to a knuckled other,
Carefully, for it trembles on the edge of powder,
Restore the jaw and find the fangs their mates.

You are watching Fox.

While it’s unlikely volumes of the poetry of Emily Dickinson (1830–1886) sit upon the bookshelves of those members of the Fox News audience who have bookshelves, they likely would concur with her words: “Tell the truth but tell it slant.”  “Slanted reporting” has become something which in recent years has attracted much attention (and much hand-wringing by the usual suspects) as an increasingly polarization of positions has been alleged to be a feature of political discourse in the West.  There is little doubt the effect (as reported) is obvious but there’s some debate about both the mechanics and the implications of the phenomenon.  As long ago as 2018, a study found that although the tenor and volume of things on X (formerly known as Twitter) was found to be increasingly toxic and surging, the number of active users engaged in these political polemics was found to be tiny and their effect was distorted by (1) the huge number of tweets they tended to post, (2) the propensity of their fellow-travelers to re-tweet and (3) the use of bots which were more prolific still.  If anything, recent voting patterns suggest it would seem the views of the general population appear to be trending away from the extremes towards the more centralist positions offered by independents or small-parties, something most obvious in Australia where compulsory voting exists.  Outfits like Fox News offer a slanted take on just about everything (and promote country & western music which truly is inexcusable) but this is something which has been identifiable in the news media as long as it’s existed and their blatant bias is hardly subversive or threatening, simply because it is so blatant.  What was most interesting in what emerged from the recent defamation suit filed by Dominion Voting Systems against Fox News suggested the network’s stance on things was motivated more by the financial imperative than ideological purity.  Intriguingly, what some analysts concluded was that if the universe shifted and the Fox News audience transformed into a bunch of seed-eating hippies, there would follow Fox’s editorial position, the slant being towards the advertising revenue rather than a particular world view.  Of course, there are some slants which are unalterable and dictated by ideological purity but with commercial media, it’s likely sometimes cause is confused with effect.

The Leaning Tower of Pisa (left) and Lindsay Lohan in The Parent Trap (1998) in front of London’s perpendicular Big Ben (1859) (right).  The architect’s original name for the latter was a typically succinct “Clock Tower”, chosen because it housed the “Great Bell of the Great Clock of Westminster” but it was in 2012 renamed “Elizabeth Tower”, marking the Diamond Jubilee of Elizabeth II (1926-2022; Queen of the UK and other places, 1952-2022), something little noted by Londoners or those beyond who continue to prefer the nickname “Big Ben” although strictly speaking that’s a reference only to the “Great Bell” a 13.5 ton (13.7 tonne) casting in bell metal (a bronze which is an alloy of about 77% copper & 23% tin).  The origin of the nickname is contested but there are no romantic tales, all the possible inspirations being worthy white men as was the Victorian way.

Although in Italy alone there are seven leaning towers (three of which stand (ie lean) in Venice), it’s the torre di Pisa (Tower of Pisa) which is by far the best-known and a frequent Instagram prop.  Built between 1173-1372, the structure in the Piazza del Duomo (Pisa’s Cathedral Square) is the campanile (the freestanding bell tower) of the adjacent Pisa Cathedral and the famous lean of some 4^o (actually somewhat less than its greatest extent after more than a century of compensating engineering works) was apparent even during construction, the cause the softness of the sub-surface.  That geological feature has however contributed to the tower’s survival, the “rubber-like” sponginess below acting to absorb movement and despite a number of severe earthquakes in the region over the centuries, the tower remains.  It is of course known as the leaning tower than a sloping, oblique or slanted tower, probably because of the conventions of use which evolved in English.

The words “sloping”, “oblique”, “slanted”, & “leaning” all describe something not vertical or horizontal there tend to be nuances which dictate the choice of which to use.  Sloping generally is used of something which inclines or declines at a gentle or continuous angle, the implication being of a gradual or smooth transition from elevation to another, such as the way a hillside rises gradually rises to its summit.  Oblique is mostly a matter of specific angles and is thus common is mathematics, geometry and engineering.  Again, it’s a reference to something neither parallel nor perpendicular to a baseline but it tends to be restricted to something which can be defined with an exact measurement; in geometric or technical use, an oblique line or angle is one neither 90^o nor perfectly horizontal.  Slanted describes something positioned at a diagonal, often used to imply a more noticeable or sharp angle but also is widely used figuratively, metaphorically and in idiomatic phrases.  Leaning refers to something tilted or positioned at an angle due to external pressure, the object in an unstable position and in need of support.  The implication carried is that something which “slants” is designed thus to do while something which “leans” does so because of some design flaw or unexpected external force being applied so it’s the leaning and not the sloping tower of Pisa, even though the structure has assumed quite a slope.

Slanting Engines

On a slant: Mercedes-Benz M196 engine schematic (left) and installed in a 1954 W196R "Streamliner" (right).  The two large donut-like objects at the front are the inboard brake drums; at the time, the engineers maintained disk brakes were "not yet ready for use". 

There are “slant” engines and they exist in three configurations.  The first is simply a conventional in-line engine (straight-six, straight-eight etc) which, when installed in a vehicle, is fitted with the block canted to the left or right, the objective being a lower hood line which means a better aerodynamic outcome.  A classic example was the Mercedes-Benz W196R Formula One racing car (1954-1955) in which the straight-eight was canted to the right at a 53^o angle, the technique carried over when the same structure was used to produce the W196S (1955) used to contest the World Sports Car Championship.  Rather opportunistically, the W196S was dubbed the 300 SLR (one of which in 2022 became the world's most expensive used car, selling at a private auction for US$142 million) as a form of cross promotion with the 300 SL (W198, 1954-1956) Gullwing then in production, even though the two types shared little more than nuts, bolts and a resemblance.  The 300 SL did however also have its straight-six engine sitting at a slant, this time canted at a 50^o angle and although the factory never published an estimate of the reduction in drag, it’s long been presumed to be “at least several percent”.  Another advantage of the configuration was it made possible the use of “long-tube” runners for the induction system, taking advantage of the properties of fluid dynamics to permit them to be tuned either for mid-range torque or top-end power.  The concept used math which had been worked out in the nineteenth century and had often been used in competition but it wasn’t until 1959 when Chrysler in the US released their picturesque induction castings that the system, imaginatively named the “Sonoramic”, reached a wider audience.

Chrysler Slant Six (170 cid, 1963) schematic.

The “true” slant engines were those with a slanted block atop an otherwise conventional arrangement of components, the best known of which was Chrysler’s long-serving “Slant Six”, produced in displacements of 170 cubic inch (2.8 litre, 1959-1969), 198 cubic inch (3.2 litre, 1970-1974) and 225 cubic inch (3.7 litre, 1987-2000).  The block of the Slant Six was canted to the right at a 30^o and like Mercedes-Benz, Chrysler took advantage of the space created to the left to produce some wide induction runners, the most extravagant those used by the special Hyper Pack option package which used a four barrel carburetor, enabling the engine to produce power which made it competitive with many V8 powered machines.  Although the name “Slant Six” became famous, it was only in the mid-sixties it caught on, Plymouth originally calling the thing a 30-D (a reference to the a 30^o slant), hardly very catchy and something to which only engineers would relate and Slant Six was soon preferred although the aficionados really like “tower of power” and the engine even today still has a devoted following.

Chrysler Slant Six with Hyper Pak in 1962 Plymouth Valiant V-200.

Chrysler didn’t restrict the Sonoramics to the big-block V8s, using it also on the short-lived (1960-1962) Hyper Pak performance option for the both 170 cubic inch (2.8 litre, 1959-1969) and 225 cubic inch (3.7 litre, 1987-2000) versions of the Slant Six, the engineers taking advantage of the space afforded by the canted block to permit the curvaceous intake runners nearly to fill the engine bay.  The Hyper Pak wasn't seen in showrooms but was available as an over-the-counter kit (literally a cardboard box containing all necessary parts) from Dodge & Plymouth spare parts departments and its life was limited because it became a victim of its own success.  Although less suitable for street use because it turned the mild-mannered straight-six into something at its best at full throttle, in the race events for which it was eligible it proved unbeatable, dominating the competition for two years, compelling the sanctioning body cancel the series.

Manifold porn: The Slant Six's angle meant there was much space available to the left and a range of intake manifolds followed, some of which remain available to this day.  Using variations of the sonoramic tuning, manifolds were produced for single, two & four barrel carburetors and between 1965-1968, Chrysler's Argentine operation produced the Slant Six in a version with twin single barrel carburetors.  The use of the properties of fluid dynamics to gain power or torque as desired quickly was adopted by the industry as an engineering orthodoxy.

Although it was the longer lived 225 version which gained the Slant Six its stellar reputation for durability and the ease with which additional power could be extracted, there's always been a following for the short-stroke 170 because of its European-like willingness to rev, the characteristics of the over-square engine (unique among the slant-six's three displacements (170-198-225)) unusually lively for a US straight-six.  Despite some aspects of the specification being modest (there were only four main bearings although they were the beefy units used in the 426 cubic inch Street Hemi V8), for much of its life it used a tough forged steel crankshaft and high-speed tolerant solid valve lifters and was a famously robust engine and one remarkably tolerant of neglect.  Despite that, after the Hyper Pak affair, Chrysler in the US showed little interest in any performance potential, knowing the US preference for V8s, something which doomed also Pontiac's short-lived single overhead camshaft (SOHC) straight-six (1966-1969).  A version of the 225 with a two-barrel carburetor (rated at 160 horsepower, an increase of 15 over the standard unit) was offered in some non-North American markets where V8 sales were not dominant and it proved very popular in South Africa, Australia, New Zealand and Central & South America but only when tighter US emission regulations forced its adoption did a 225 with a two barrel carburetor appear in the home market though there it was installed to restore the power losses suffered after the emission control plumbing was added rather than seek gains.

Pontiac Trophy 4 cutaway.

Making a straight-eight or V8 by combining two in-line fours has been done a few times and many have been successful (although Triumph managed to create a truly horrid one for the otherwise lovely Stag).  Less common is making a four from an eight but that’s what Pontiac did when they conjured their 194.5 cubic inch (3.2 litre) four by using one bank of their 389 cubic inch (6.4 litre) Trophy V8 and it was (just about) literally cut in half, meaning the cylinders were canted to the right by 45^o (the V8 obviously in a conventional 90^o configuration.  To emphasize the family connection with the highly regarded Pontiac Trophy V8, the smaller offspring was called the Trophy 4 (although it was at time also dubbed the Indy 4 or Indianapolis 4 which even at the time sounded ambitious).  It did work and the economic advantages for the manufacturer (use of common components and the same assembly line) were compelling but the limitations inherent in a four-cylinder of such a large displacement were apparent in the rough-running and wear on critical parts and it was available only between 1961-1963, only in the compact Tempest.

Diagram showing balance shaft locations.

Large displacement four cylinder engines have been built.  Fiat in 1910 built two of their S76s to contest the world LSR (land speed record) and they were an hefty 28.4 litres (1730 cubic inch), the “Beast of Turin” using its then impressive 290 horsepower (216 kW) to attain a one-way speed of 132.27 mph (213 km/h) but, because it was not possible for the team to make the “return run” (ie in the opposite direction) within the stipulated one hour, the LSR remained with the Blitzen Benz which in 1909 had set a mark of 125.94 mph (202.65 km/h).  On land, never again would anyone build a four with the capacity of the Beast of Turin but units with a displacement approaching 5.0 litres (305 cubic inch) were not uncommon during the inter-war years.  However, the technology of the internal combustion engine (ICE) greatly advanced during World War II and one consequence of that was engine speeds rose and less displacement was required for a specific output, both factors which conspired to make the big fours unfashionable.  They did however make a comeback in the 1970s when the clever trick of “balance shafts” enabled the inherently chronic second order harmonic vibrations to be “dampened out” and Porsche between 991-1995 produced a 3.0 litre (183 cubic inch) range which used the technique.  The balance shaft was invented early in the twentieth century by English engineer Frederick Lanchester (1868–1946) but it was Mitsubishi which in the 1970s patented their “Silent Shaft” system and although Porsche developed their own version, they worked out the Japanese design was superior so used that instead, paying Mitsubishi a small royalty (under US$10) for each one installed.  A balance shaft uses two counterweights (looking something like small hockey pucks with the shaft running through them), set some 1½ inches (40 mm) apart and turns at twice the engine-speed.  With one shaft mounted high on one side of the engine and the other low on the opposite side, the pair counter-rotates, balancing the large reciprocating mass.