Dogdish

Dogdish (pronounced dog-dish or dawg-dish)

(1) The dish in which a pet dog’s meals are served (probably a rare use because “dog bowl” is the more common (an accurate) descriptor.

(2) In US use, the style of simple hubcap used in the 1960s & 1970s for low-cost vehicles (especially for fleet operators such as police forces) or certain high-performance cars (including those ordered for competition use).

1940s or 1950s (in the automotive context): The word dog pre-dates the eleventh century and was from the Middle English dogge (akin to the Scots dug), from the Old English dogga & docga, of uncertain origin.  The documentary evidence from a thousand years ago is unsurprisingly scant but does suggest “dog” was used to mean something like the modern “cur” or “mutt” (ie a common or stray dog as opposed to one of good breeding), later refined to be applied to “large or stocky canines”.  The Old English dogga & docga may have been a pet-form diminutive of dog, the appended suffix -ga also used of pet frogs (frocga) and pigs (picga).  The ultimate source of dog (and the meaning) is uncertain but there may be some link with the Old English dox (dark, swarthy) or the Proto-West Germanic dugan (to be suitable), the latter the origin of the Old English dugan (to be good, worthy, useful), the English dow, the Dutch deugen and the German taugen.  It’s all speculative but the most supported theory appears to be it was likely a children’s epithet for dogs meaning something like “good creature”.  Less supported is the notion of a relationship with docce (stock, muscle), from the Proto-West Germanic dokkā (round mass, ball, muscle, doll), from which English gained dock (stumpy tail) and ultimately (in that context) docking (the removal of a tail.  In England, as late as the early fifteenth century, the common words used of domestic canines was hound, from the Old English hund while dog tended to be restricted to a sub-type resembling the modern mastiff and bulldog.  In the way English tends towards shorter forms, by the sixteenth century dog had become the general word with hound increasingly a specialist word used of hunt dogs (accounting for all those English pubs called “The fox & hounds”.  At the same time, the word dog was adopted by several continental European languages as their word for mastiff although this use didn’t persist as “dog” became more generalized.  Etymologists note that despite the overlaps in form and meaning, the English word was not related to the Mbabaram dog.  Dish predated the tenth century and was from the Middle English dish & disch, from the Old English disċ (plate; bowl; dish), from the Proto-West Germanic disk (table; dish), from the Latin discus, from the Ancient Greek δίσκος (dískos) (quoit, disc, discus, dish, trencher, round mirror, reliquary, marigold).  For centuries the orthodox etymology of dískos was that it was from δίκ-σκος (dík-skos), from δικεῖν (dikeîn) (to cast) but more recent scholarship have cast doubts on this on the grounds the suffix -σκο- was rare in nominal derivation.  The alternative suggestion was δισκ- (disk-) was a variant of δικεῖν (dikeîn) (of pre-Greek origin) rather than a direct formation.  Dogdish is a noun; the noun plural is dogdishes.

The dogdish hubcap

Dogdishes (also as dog dish or dog-dish and there’s even a faction which calls them “pie pans”, the collective being “poverty caps”) are a basic, unadorned style of hubcap used with steel wheels (“steelies” to the tappet-heads).  Although some steel wheels could be stylish (notably those offered by the US manufacturers in the 1960s & 1970s and those used on the later Jaguar E-Types (XKE) and some Daimler & Jaguar XJs, in passenger vehicles, lighter aluminium wheels have in recent decades become the standard fitting for all but the cheapest models in a range.  However, the steel wheel possesses a number of virtues as well as being cheaper than aluminium units, notably their resistance to impact injuries and ease of repair, the latter the reason they’re still the choice for many police vehicles and rental fleets.  The steel wheel is inherently heavier so not the ideal choice for high performance use but the strength is attractive for off-road users who appreciate being able to effect repairs in remote places with little more equipment than a hammer.

1929 Mercedes-Benz 460 Nürburg (W08, 1928-1933); a Nürburg was the first "Popemobile" (sopplied by the factory to Pius XI (1857–1939; pope 1922-1939) and the official car of Eugenio Pacelli (1876-1958, the future Pope Pius XII (1939-1958)) while Apostolic Nuncio to Germany (1920–1930).  The wheels were fashioned in timber and the hubcaps were of stainless steel.  Wooden wheels were by 1929 already archaic although some were still being produced as late as 1939.  Typically, hickory was favored because of its strength, flexibility and shock resistance which made it able to cope with the stresses imposed by the often rough roads of the era.

1957 Cadillac Eldorado Brougham.  During the 1930s, for various reasons (dirt protection, aerodynamics and, increasingly, aesthetics), hubcaps grew to become "wheel covers" and in the hands of US stylists in the 1950s they became an integral component of the whole design, used for product differentiation and the establishment of a model's place in the hierarchy.  Compared with the excesses which would be seen in the 1960s & 1970s, those on the 1957 Cadillac Eldorado Brougham were almost restrained.      

The origin of the hubcap was, fairly obviously, “a cap for hub”, something which dates from the age of horse-drawn carts.  Although they would later become something decorative, hubcaps began as a purely function fitting designed to ensure the hub mechanism was protected from dirt and moisture because removing a wheel when the hub was caked in mud with bolts “rusted on” could be a challenge.  In the twentieth century the practice was carried over to the automobile, initially without much change but as wheels evolved from the wooden-spoked to solid steel (and even in the 1920s some experimented with aluminium), the hubcaps became larger because the securing bolts were more widely spaced.  This meant they became a place to advertise so manufacturers added their name and before long, especially in the US, the humble hubcap evolved into the “wheel-cover”, enveloping the whole circle and they became a styling feature, designs ranging from the elegant to the garishly ornate and some were expensive: in 1984 a set of replacement “wire” wheel covers for a second generation Cadillac Seville (the so-called “bustle-back”, 1980-1985) listed at US$995.00 if ordered as a Cadillac part-number and then that was a lot of money.

1969 COPO Chevrolet Camaro ZL1.  Only 69 units in this configuration were built for not only was the all-aluminium ZL1 a highly-strung engine not suited to street use, it added US$4160.15 to a V8 Camaro's base price of US$2727.00 restricting demand to those who really did want to run on drag strips.  The basic interior fittings and dogdish hubcaps saved buyers a few dollars. 

But the dogdishes persisted because police forces and other fleet operators ordered cars with them in large volumes and many thrifty private buyers opted for them too.  As the cult they are today however, the origin lies in their appearance on muscle cars during the 1960s.  Sometimes their inclusion was as a cost-cutting measure (such as the 1968 Plymouth Road Runner) or because the vehicle was being produced for competition (such as the Chevrolet Camaros fitted with 427 cubic inch (7.0 litre) engines via General Motors’ (GM) COPO (Central Office Production Order) scheme used usually for volume runs of things like vans for utility companies or police interceptors with the high-performance but not the "dress-up" options).  The apparent anomaly of the high-performance Cameros running the dogdishes (then sometimes referred to as “poverty caps”) was that the buyer would anyway be fitting their own wheel/tyre combination so the vehicle was supplied ex-factory with the cheapest option.  The photographic record suggests that in truth, when new, relatively few muscle cars prowled the street with dogdishes still attached, something more stylish usually fitted at some point during ownership but they’ve become so emblematic of the era that reproductions are now available for those undertaking restorations or creating their own clone (tribute/faux/fake/replica etc); authenticity can be emulated.

Dogdish owner: Lindsay Lohan leaving a Lincoln Town Car with Chloe the Maltese (which lived to the reasonable age of 15), May 2008, New York City.  He first dog, also a Maltese, she called Gucci, the name explained by the puppy arriving simultaneously with her “first pair of Gucci boots”.  The dog promptly chewed up the boots.

Usually, in the collector market, what commands the highest price is a vehicle which left the factory fitted with the most options, the “fully-optioned” machine the most desirable (although the odd extra-cost item like an automatic transmission or a vinyl roof can detract), the dogdishes don’t deter buyers, most of who would probably admit the various styled steel wheels of the era were better looking.  In August 2024, the most highly optioned 1969 Dodge Daytona in the most desirable mechanical configuration (the 426 cubic inch (7.0 litre) Street Hemi V8 & four-speed manual transmission combination) achieved US$3.36 million at Mecum’s auction at Monterey, California.  The price was impressive but what attracted the interest of the amateur sociologists was the same Daytona in May 2022 sold for US$1.3 million when offered by Mecum at their auction held at the Indiana State Fairgrounds.  The US$1.3 million was at the time the highest price then paid for a Hemi Daytona (of the 503 Daytonas built, only 70 were fitted with the Hemi and of those, only 22 had the four-speed manual) and the increase in value by some 250% was obviously the result of something other than the inflation rate.

The US$3.36 million 1969 Dodge Daytona.  When new, the Daytona (and the more numerous companion "winged warrior" Plymouth Superbird) was sometimes difficult for dealers to sell, the wild body modifications not appealing to all.  Consequently, so resorted to returning them to the same visual appearance as standard Dodge Chargers.  Now, the process is reversed and a number of Chargers have been transformed into "clone" Daytonas.   

The consensus was that although the internet had made just about all markets inherently global, local factors can still influence both the buyer profile and their behaviour, especially in the hothouse environment of a live auction.  Those who frequent California’s central coast between Los Angeles and San Francisco include a demographic not typically found in the mid-west and among other distinguishing characteristics there are more rich folk, able to spend US$3.36 million on a half-century old car they’ll probably never drive.  That’s how the collector market now works.

1971 Plymouth Hemi 'Cuda: US$410,000 in 1999; US$3.36 million in 2014, the appreciation due to (1) the supply & demand curve and (2) the largess of the US Federal Reserve.  For those wanting "the look", reproduction stainless steel dogdishes are available for US$258.00 (set of four). 

Despite the result, the green Daytona’s result wasn’t even the highest price a Chrysler product had achieved at auction, that mark set in Seattle in 2014 when one of the five four-speed manual 1971 Plymouth Hemi ‘Cuda convertibles (there were another seven automatics) sold US$3.78 million.  While the outcome of such a rarity was not indicative of broader market trends (although there have been stellar performances for classic Mercedes-Benz and pre-1973 Ferraris), it did illustrate the effect of the increase in the global money supply in the wake of the GFC (Global Financial Crisis, 2008-2012) when central banks essentially not only “replaced” much of money the rich had lost gambling but gave them a healthy bonus as well.  The Hemi ‘Cuda in December 1999 had (albeit in its original, un-restored state sold at auction for US$410,000 so the successful US$3.36 million bid 14 years on was an increase of more than 800%, the sort of RoI (return on investment) which would once have impressed even Richard "Dick" Fuld (b 1946), chairman & CEO of Lehman Brothers (1850-2008).  Time however will tell if the money spent in 2014 was a good investment because when another four-speed 1971 Hemi ‘Cuda convertible was offered for auction in 2021, despite predictions it would go for as much as US$6.5 million, it was passed-in at US$4.8 million without reaching the reserve.  The car was fitted with Chrysler’s “Rallye” wheels rather than the steelie/dogdish combo but this was not thought to be of any significance.

Mecum Auctions catalogue image of 1971 four-speed Plymouth Hemi 'Cuda convertible with 15" Rallye wheels.  Passed in on a high-bid of US$4.8 million, it'll be interesting to see if, when next offered, steelies & dogdishes are fitted.

Frisbee

Frisbee (pronounced friz-bee)

(1) A brand of plastic concave disk, used for various games by sailing it through the air, thrown by making it spin as it's released with a flick of the wrist.

(2) By extension & genericization (without an initial capital), a disk-shaped gliding toy of any brand.

(3) The sport or pass-time involving flying disks.

1957: The brand name Frisbee was trademarked in 1959 and later acquired by Wham-O.  Frisbee was an alteration of Frisbie, the name applied to the disk game by students who tossed the pie plates which came with the “Mrs Frisbie’s Pies” from the Frisbie Pie Company which operated from the Frisbie Bakery in Bridgeport, Connecticut.  Frisbie supplied pies to Yale University and it was at Middlebury College in Vermont during the 1930s a campus craze started for tossing empty pie tins stamped with the company's logo, the aeronautical qualities apparently uniquely good (students at both Yale and Princeton claiming to have discovered the aerodynamic properties).  The spelling of the name was changed on legal advice and frisbee is a genericization of the trademark.  Frisbee is a noun & verb and frisbeeing & frisbeed are verbs; the noun plural is frisbees.  The adjectives frisbesque & frisbeeish are both non standard.

Lindsay Lohan carrying her frisbee in its protective case.

The family name Frisbie exists in English records from 1226, from a place name in Leicestershire (Frisby on the Wreak), attested from 1086, from the toponym attested 1086 in Frisby on the Wreak, Leicestershire, from the Old Danish Frisby (Frisian village; farmstead or village of the Frisians), from the Old Norse Frisa, genitive plural of Frisr.  Not unusually for the age, there were two hamlets in county Leicestershire called Frisby but genealogists seem certain the origin of the family name is associated with Frisby on the Wreak.  In the parish records of 1239 there is a priest named de Frysby who was vicar of the church at Welham, a village about 13 miles (21 km) south-east of the city of Leicester, England and he may be the same Roger de Frysbey who in 1246 was curate of the church at Barkestone, ten miles (16 km) north of Melson Mowbray.  As a geographical name, the now lost Frisbys were two of many in the British Isles which derived their names from the Old Norman frisir (someone from the area of Frisia or Friesland).  The names were illustrative of the vast movement of people from Europe after the Norman Conquest of England in 1066.  A multitude of spelling variations characterize Norman surnames, many because the Old and Middle English lacked definite spelling rules and in an age of limited mobility, regional evolutions were common and gave rise to many dialectical forms (the introduction of Norman French to England also had an effect, as did the court languages of Latin and French).  It was not unknown for one person’s name to be spelled several ways during their single lifetime and Frisbie was just one of many including Frisbie, Frisby, Frisbee, Frisebie, Frisebye & Friseby.  The Frisbie motto was Semper fidelis (Always faithful).

At much the same time students in the north-east US were tossing Mrs Frisbie’s pie tins to each other, a young couple were enjoying similar fun with a popcorn can lid but, unlike the students, they had an entrepreneurial streak and began selling the cardboard bases sold to cake makers for five times the cost, changing only the labeling.  World War II (1939-1945) interrupted business between 1942-1945 but, once hostilities ceased, the designer applied to the re-purposed disk some lessons learned from service with the US Army Air Force (USAAF), improving the aerodynamic properties.  The zeitgeist of the late 1940s was also influential.  In June 1947, a commercial pilot claimed to have seen nine "flying discs" zipping across Washington state at a speed he estimated at 1,200 mph (1931 km/h) and, without waiting for verification, the Associated Press (AP) wire service distributed the story.  The Hearst press ran the piece with a "flying saucers" headline and that phrase went viral about as quickly as things now spread on social media.  Saucer-mania had begun and soon there were hundreds of reported sightings, a trend which continued, spiking in response to events such as the launch of the USSR’s Sputnik satellite in 1957.  Taking advantage, the prototype Frisbee, by then mass-produced in plastic, was renamed from Whirlo-Way to Flyin' Saucer.

Effie Krokos, this time in black jacket.

In 2019, Effie Krokos (b 1999) and her fiancé were in the front yard of his house in Loveland (a wonderful name), 40 miles (64 km) north of Denver, enjoying some frisbee tossing.  Because it was a hot day, she removed her shirt and continued to play while topless.  Several hours later, a Loveland police officer (the mind boggles) arrived and issued an indecent-exposure citation, invoking a city ordinance prohibiting exposure in public places or places open to public view.  Ms Krokos told the officer of a recent circuit court ruling against the public nudity ordinance in the neighboring city of Fort Collins but the officer maintained the ruling didn’t apply in Loveland.

Loveland Police cruiser.

Denver civil rights attorney David Lane (b 1954) agreed to take the case as part of the #FreetheNipple movement, explaining the Circuit Court of Appeals had ruled in February 2019 that Fort Collins’ public nudity ordinance, which had no restrictions on male toplessness but prohibited women from baring their breasts, was in violation of the Equal Protection Clause of the 14th Amendment.  Free the Nipple v City of Fort Collins (17-1103 (10th Cir. 2019)) established that ordinances based on gender are unconstitutional.  “Anywhere it’s legal for a man to appear in public topless, it’s legal for a woman to do the same” Lane said.  Loveland accepted the offer of a US$50,000 settlement in Krokos’ case in to prevent a federal lawsuit.  The case was dismissed with prejudice (meaning that it cannot be reintroduced in another lawsuit) and the city suspended enforcement of the provision, pending a review.  Ms Krokos said she wants to show that "it isn’t fair for women to be treated differently than men by law enforcement" and hopes that the case will make more women aware of their rights.

Boston University's women’s "Ultimate Frisbee" team (the Lady Pilots), ran an "I Need Feminism Because..." campaign.  The campaign was an effort to draw attention to the need for gender equity, apparently prompted by crooked Hillary Clinton's (b 1947; US secretary of state 2009-2013) loss in that year’s presidential election to a man whose reported comments about women would have ended the political career of anyone else.  Each of the players wrote their own message on the underside of a frisbee.

By the mid 1950s, the design had been refined to the form which exists to this day and had the changes were judged sufficiently innovative to be granted a US Design Patent; this was the product released as the Pluto Platter and the final evolution of the name came in 1957 when the named Frisbee was applied.  Remarkably, it had taken until then for the knowledge of the casual student game of the 1930s to become known to the manufacturers after an article appeared in a newspaper which revealed students were calling the Pluto Platter the Frisbie.  It was clearing a catchier name and it caught on, persuading the manufacturers to change the name to Frisbee, the change in spelling on legal advice, lest the pie makers object though that would soon become moot, the Frisbie Pie Company ceasing operations in 1958, something apparently unrelated to flying disks and attributed to the sharp US recession of that year.

Paige Pierce about to execute a backhand drive.

Because Frisbee is a registered trademark, the name isn’t use in formal competition.  The World Flying Disc Federation (WFDF) applied for consideration by the Olympic Organizing Committee to be included in the Olympic Programme of the 2028 Summer Olympic Games in Los Angeles but didn’t make the short list which was restricted to baseball & softball, break dancing, cricket, flag football, karate, kickboxing, lacrosse, motorsport, and squash.  WFDF expressed disappointment, noting that “Flying Disc sports is actively practiced on a competitive level in 103 countries in the world and appeared to satisfy all of the objective criteria agreed between the IOC and LA28. These criteria included not adding cost and complexity to the games by utilizing full venue sharing on the beach or grass stadium, having total gender equality with our gender-balanced mixed format, having youth appeal, and ensuring that the top athletes were involved. There are few other sports that can boast an equivalent Californian DNA as frisbee and we felt our Ultimate 4s format requiring a total athletes’ quota of only 48 would fit well given the overall cap on the Games. We are also strongly convinced that our sport is unique in upholding integrity and fairness with our self-refereeing concept of Spirit of the Game.”  The WFDF have indicated they’ll make representations to be included in the 2032 Olympic Games in Brisbane, Australia.  The game is certainly growing and a tiny elite are already finding Flying Disk a lucrative pursuit, the top athletes attracting sponsorship deals from disk manufacturers.  Paul Mcbeth’s (b 1990) contract is worth a reported US$10 million over five years while the highest paid woman is Paige Pierce (b 1991), earning US$3 million over three years.  Both are under contract to Discraft.

Gullwing & Gull-wing

Gullwing & Gull-wing (pronounced guhl-wing)

(1) In aviation, an airplane wing that slants briefly upward from the fuselage and then extends horizontally outward (ie a short upward-sloping inner section and a longer horizontal outer section).

(2) Of doors, a door hinged at the top and opening upward (applied usually to cars but can be used in aviation, aerospace and architecture).

(3) Anything having or resembling (extended and partially extended) wings of a gull (and many other birds).

(4) In electronic hardware, a type of board connector for a small outline integrated circuit (SOIC).

(5) In historic admiralty jargon, a synonym of goose wing (a sail position).

Gull is from the Middle English gulle, from the Brythonic, from the Proto-Celtic wēlannā (seagull) and was cognate with the Cornish guilan, the Welsh gwylan, the Breton gouelan and the Old Irish faílenn.  The noun Gull was used (in a cook-book!) to describe the shore bird in the 1400s, probably from the Brythonic Celtic; it was related to the Welsh gwylan (gull), the Cornish guilan, the Breton goelann; all from Old Celtic voilenno-.  Gull replaced the Old English mæw.

The verb form meaning “to dupe, cheat, mislead by deception" dates from the 1540s, an adaptation by analogy from the earlier (1520) meaning "to swallow", ultimately from the sense of "throat, gullet" from the early 1400s.  The meaning was the idea of someone so gullible to “swallow whatever they’re told”.  As a cant term for "dupe, sucker, credulous person", it’s noted from the 1590s and is of uncertain origin but may be from the verb meaning "to dupe or cheat".  Another possibility is a link to the late fourteenth century Middle English gull & goll (newly hatched bird" which may have been influenced by the Old Norse golr (yellow), the link being the hue of the bird’s down.

Wing was from the late twelfth century Middle English winge & wenge (forelimb fitted for flight of a bird or bat), applied also to the part of certain insects which resembled a wing in form or function, from the Old Norse vængr (wing of a bird, aisle etc) from the Proto-Germanic wēinga & wēingan-.  It was cognate with the Danish vinge (“wing”), the Icelandic vængur (wing), the West Frisian wjuk (wing) and the Swedish vinge (“wing”), of unknown origin but possibly from the Proto-Germanic we-ingjaz ( a suffixed form of the primitive Indo-European root we- (blow), source of the Old English wawan (to blow).  It replaced the native Middle English fither, from the Old English fiþre & feðra (plural (and related to the modern feather)) from the Proto-Germanic fiþriją, which merged with fether, from the Old English feþer, from the Proto-Germanic feþrō).  The meaning "either of two divisions of a political party, army etc dates from circa 1400; the use in the architectures was first recorded in 1790 and applied figuratively almost immediately.  The slang sense of earn (one's) wings is 1940s, from the wing-shaped badges awarded to air cadets on graduation. To be under (someone's) wing "protected by (someone)" is recorded from the early thirteenth century; the phrase “on a wing and a prayer” is title of a 1943 song about landing a damaged aircraft.

A Gull in flight (left), inverted gull-wing on 1944 Voight Corsair (centre) & gull-wing on 1971 Piaggio P.136 (Royal Gull) (right).

In aviation, the design actually pre-dates powered flight (1903) by half a millennium, appearing in the speculative drawings of flying machines by Leonardo da Vinci (1452-1519) and others, an inevitable consequence of being influenced by the flapping wings of birds.  There were experiments, circa 1911, to apply the gull-wing principle to some of the early monoplanes in a quest to combine greater surface area with enhanced strength but it wasn’t until the 1920s it began widely to be used, firstly in gliders for some aerodynamic advantage and later, powered-aircraft.  In powered aircraft, the gull-wing offered little aerodynamically but had structural advantages in that it allowed designers more easily to ensure (1) increasingly larger propellers would have sufficient clearance, (2) undercarriage length could be reduced (and consequently strengthened) and (3) wing-spans could slightly be reduced, a thing of great significance when operations began on aircraft carriers, the gull-wing being especially suited to the folding-wing model.  Depending on the advantage(s) sought, designers used either a classic gull-wing or the inverted gull-wing.  The correct form is for all purposes except when applied to the the (1954-1957) Mercedes-Benz 300 SL coupé is the hyphenated gull-wing; only the 1950s Mercedes-Benz are called Gullwings.

1945 Jamin-Bouffort JB.

Cars with gull-wing doors had been built before Mercedes-Benz started making them at scale and the principle was known in both aviation and marine architecture.  One was the 1945 Jamin-Bouffort JB, the creation of French aeronautical engineer Victor-Albert Bouffort (1912-1995) who had a long history of clever, practical (and sometimes unappreciated) designs.  The Jamin-Bouffort JB was a relatively small three-wheeler built using some of the techniques of construction used in light aircraft, the gull-wing doors the most obvious novelty.  Anticipating the 1950s boom in micro-cars, there was potential but with European industry recovering from the war, most effort was directed to resuming production of pre-war vehicles using surviving tooling and there was little interest in pursuing anything which required development time.  Monsieur Bouffort would go on to design other concepts ahead of their time, some of his ideas adopted by others decades after his prototypes appeared.

Bugatti Type 64 with gull-wing body fabricated using original conceptual sketches on 1939 Type 64 chassis.

In 1939, Jean Bugatti drew up plans for the Type 64, a vehicle with gull-wing doors, his sketches an example of the great interest being shown by European manufacturers in aerodynamics, then called usually streamlining.  Although two Type 64s were completed in 1939, neither used the gull-wing doors and it would be another eighty-odd years before Bugatti’s design was realised when collector & president of the American Bugatti Club, Peter Mullin (b 1941), arranged the fabrication of the coachwork, based on the original drawings.  Built in exactly the same way craftsmen would have accomplished the task in 1939, the body was mounted on the surviving Type 64 chassis (64002), united for the first time with what Jean Bugatti called papillon (butterfly) doors which all (except the French) now call gull-wings.

Mercedes-Benz and the gull-wing.

1952 Mercedes-Benz 300 SL prototype (W194).

By 1951, although the Wirtschaftswunder (the post-war German “economic miracle”) still lay ahead, structural changes (the most important being the retreat by the occupying forces in the western zones from the punitive model initially adopted and the subsequent creation in 1948 of the stable deutschmark), had already generated an economy of unexpected strength and Mercedes-Benz was ready to make a serious return to the circuits.  Because the rules then governing Formula One didn’t suit what it was at the time practical to achieve, the first foray was into sports car racing, the target the ambitious goal of winning the Le Mans 24 hour race, despite a tight budget which precluded the development of new engines or transmissions and dictated the use of as much already-in-production as possible.

1952 Mercedes-Benz 300 SL prototype (W194).

It was the use of a production car engine designed not for ultimate power but smoothness, reliability and a wide torque band which ultimately dictated the use of the gull-wing doors.  The engine was the 3.0 litre (183 cubic inch) M186 straight-six used in the big 300 limousines and its two door derivatives, of advanced design by the standards of the time but also big, tall and heavy, attributes not helpful to race-car designers who prefer components which are compact, light and able to be mounted low in a frame.  A new engine not being possible, the factory instead created a variation, the M194, which used the triple-carburetor induction of the 300S coupés in an improved cylinder head, the innovation being the iron-block now lying at a 50^o angle, thereby solving the problem of height by allowing it to be installed while canted to the side, permitting a lower bonnet line.  Using the existing gearbox, it was still a heavy engine-transmission combination, especially in relation to its modest power-output and such was the interest in lightness that, initially, the conventional wet-sump was retained so the additional weight of the more desirable dry-sump plumbing wouldn’t be added.  It was only later in the development-cycle that dry-sump lubrication was added.

1952 Mercedes-Benz 300 SL space-frame (W194).

The calculations made suggested that with the power available, the W194 would be competitive only if lightness and aerodynamics were optimized.  Although the relationship between low-drag and down-force were still not well-understood, despite the scientific brain-drain to the US and USSR (forced and otherwise) in the aftermath of the war, the Germans still had a considerable knowledge-base in aerodynamics and this was utilized to design a small, slippery shape into which the now slanted straight-six would be slotted.  There being neither the time nor the money to build the car as a monocoque, the engineers knew the frame had to be light.  A conventional chassis was out of the question because of the weight and they knew from the pre-war experience of the SSKL how expensive and difficult it was to reduce mass while retaining strength.  The solution was a space-frame, made from tubular aluminum it was light, weighing only between 50-70 kg (110-155 lb) in it’s various incarnations yet impressively stiff and the design offered the team to opportunity to use either closed or open bodies as race regulations required.

However, as with many forms of extreme engineering, there were compromises, the most obvious of which being that the strength and torsional rigidity was in part achieved by mounting the side tubes so high that the use of conventionally opening doors was precluded.  In a race car, that was of no concern and access to the cockpit in the early W194s was granted by what were essentially top-hinged windows which meant ingress and egress was not elegant and barely even possible for those of a certain girth but again, this was though hardly to matter in a race car.  In this form, the first prototypes were built, without even the truck-like access step low on the flanks which had been in the original plans.

1952 Mercedes-Benz 300 SL production coupé (W194).

Actually, it turned out having gull-wing windows instead of gull-wing doors did matter.  Although the rules of motorsport’s pettifogging regulatory body, the Fédération Internationale de l'Automobile (the FIA; the International Automobile Federation) were silent on the types and direction of opening doors and, in the pre-war era they had tolerated some essentially fake doors, their scrutineers still raised objections during inspection for the 1952 Mille Miglia.  The inspectors were forced to relent when unable to point to any rule actually being broken but it was clear they’d be out for revenge and the factory modified the frame to permit doors extending down the flanks, thereby assuming the final shape which would come to define the gull-wing door.  Relocating some of the aluminum tubing to preserve strength added a few kilograms but forestalled any retrospective FIA nit-picking.  To this day, the FIA's legions of bureaucrats seem not to realise why they’ve for so long been regarded as impediments to competition and innovation.

The W194 at Le Mans, 1952.

First tested on the Nürburgring and Hockenheimring in late 1951, the W194, now dubbed 300 SL for promotional purposes, was in March 1952 presented to the press on the Stuttgart to Heilbronn autobahn.  In those happy days, there was nothing strange about demonstrating race cars on public highways.  The SL stood for Super Leicht (super light), reflecting the priority the engineers had pursued.  Ten W194s were built for the 1952 season and success was immediate, second in the Mille Miglia; a trademark 1-2-3 result in the annual sports car race in Bern and, the crowning achievement, a 1-2 finish in the twenty-four hour classic at Le Mans.  Neither usually the most powerful nor the fastest car in the races it contested, the 300 SL nevertheless so often prevailed because of a combination of virtues.  Despite the heavy drive-train, it was light enough not to impose undue stress on tyres, brakes or mechanical components, the limousine engine was tough and durable and the outstanding aerodynamics returned surprising good fuel economy; in endurance racing, reliability and economy compensate for a lot of absent horsepower.

As a footnote (one to be noted only by the subset of word nerds who delight in the details of nomenclature), for decades, it was said by many (even normally reliable sources) that SL stood for Sports Leicht (sports light) and the history of the Mercedes-Benz alphabet soup was such that it could have gone either way (the SSKL (1929) was the Super Sports Kurz (short) Leicht (light)) and from the 1950s on, for the SL, even the factory variously used Sports Leicht and Super Leicht.  It was only in 2017 it published a 1952 paper (unearthed from the corporate archive) confirming the correct abbreviation is Super Leicht.  Sports Leicht Rennsport (Sport Light Racing) seems to be used for the the SLRs because they were built as pure race cars, the W198 and later SLs being road cars but there are references also to Super Leicht Rennsport.  By implication, that would suggest the original 300SL (the 1951 W194) should have been a Sport Leicht because it was built only for competition but given the relevant document dates from 1952, it must have been a reference to the W194 which is thus also a Sport Leicht.  Further to muddy the waters, in 1957 the factory prepared two lightweight cars based on the new 300 SL Roadster (1957-1963) for use in US road racing and these were (at the time) designated 300 SLS (Sports Leicht Sport), the occasional reference (in translation) as "Sports Light Special" not supported by any evidence.  The best quirk of the SLS tale however is the machine which inspired the model was a one-off race-car built by Californian coachbuilder ("body-man" in the vernacular of the West Coast hot rod community) Chuck Porter (1915-1982).  Porter's SLS was built on the space-fame of a wrecked 300 SL gullwing (purchased for a reputed US$500) and followed the lines of the 300 SLR roadsters as closely as the W198 frame (taller than that of the W196S) allowed.  Although it was never an "official" designation, Porter referred to his creation as SL-S, the appended "S" standing for "scrap". 

W194 roadsters at Nürburgring, 1952.

After the triumph at Le Mans, the SL won at the Eifelrennen and was then entered into in a race on the Nürburgring and to shed some weight, engineers converted three of the coupés to roadsters, emulating the body of one of the original ten which had been open-topped from the start.  To avoid any unpleasantness with the FIA, the section of the doors extending into the side of the car was retained and a smaller windscreen was installed to improve aerodynamics and afford the driver some protection from the weather and bugs unfortunate enough to be caught in the path.  The roofectomy reduced weight by about 100 kg (220 lb) which presumably helped, the four finishing in the first four places.

Winning W194, 1952 Carrera Panamericana Mexico, the protective metal struts were an ad-hoc addition after a bird strike.

One final adventure for the year yielded a perhaps unexpected success.  In November 1952, the factory entered two coupés and two roadsters in the third Carrera Panamericana Mexico, a race of 3100 kilometres (1925 miles) over five days and eight stages, their engines now bored out to 3.1 litres (189 cubic inches) increasing power from 175 bhp (130kw) to 180 (135).  The cars finished 1-2-3 although the third was disqualified for a rule violation and the winning car endured the intrusion at speed of a vulture through the windscreen.  Unlike the 300 SL, the unlucky bird didn’t survive.  There was however one final outing for the W194.  In 1955 it won the Rally Stella Alpina, the last time the event would be run in competitive form, one of many cancelled in the wake of the disaster at Le Mans that year in which 84 died and almost two-hundred injured.  Coincidently, that accident involved the W194’s successor, the 300 SLR.

1953 300 SL Prototype.

The 300 SL was re-engineered for the 1953 season, the bodywork now made from magnesium, lighter even than aluminum, the design of which had seen the car return to the wind-tunnel after which it gained a revised front section which not only reduced drag but also improved cooling by optimizing airflow to the radiator and engine compartment.  Power rose too.  Again drawing from wartime experience with the DB60x V12 aero-engine used in many German warplanes, direct fuel-injection was introduced which boosted output from 180 bhp (135 kw) to 215 bhp (158 kW).  Nor were the underpinnings neglected, the rear suspension design improved (somewhat) with the addition of the low-pivot single-joint swing axle (which would later appear on some production 300 SLs) while the transmission was flanged on the rear axle, not quite a transaxle but much improving the weight distribution.  The wheelbase was shortened by 100 millimetres (4 inches) and 16-inch wheels were adopted.  Even disk brakes were considered but the factory judged them years from being ready and it wouldn’t be until 1961 that they appeared on a Mercedes-Benz, more than half a decade after others had proved the technology on road and track.  There was however one exception to that, a disc brake had been installed between propeller shaft and differential on the high-speed truck built in 1954 to carry the Grand Prix cars between the factory and circuits in Europe.

The revised 300 SL however was never raced, the factory’s attention now turning to the Formula One campaign which, with the W196, would so successfully be conducted in 1954-1955, an off-shoot of which would be the W194’s replacement, the W196S sports car which would be based on the Grand Prix machine and dubbed, a bit opportunistically, the 300 SLR (Sport Leicht Rennen (Sport Light-Racing)).  Such was the impression made by the futuristic W194 that it would inspire production of the road-going 300 SL Gullwing (W198), 1400 of which were built during 1954-1957 (including 29 with aluminium bodies).

1955 Mercedes-Benz 300 SL (W194) (1954-1957).

Although the public found them glamorous, the engineers at Mercedes-Benz had never been enamoured by the 300 SL’s gull-wing doors, regarding them a necessary compromise imposed by the high side-structure of the space-frame which supported the body.  Never intended for use on road-cars, it was the guarantee of the US importer of Mercedes-Benz to underwrite the sale of a thousand gull-wing coupés that saw the 300 SL Gullwing enter production in 1954.  The sales predictions proved accurate and of the 1400 built, some eighty percent were delivered to North American buyers.  The W198 300SL was the model which became entrenched in the public imagination as “the Gullwing” and it’s the only instance where the word doesn’t need to be hyphenated.  Glamorous those doors may have been, they did impose compromises.  The side windows didn’t roll down, ventilation was marginal and air-conditioning didn’t exist; in a hot climate, one really had to want to drive a Gullwing.  There was also the safety issue, some drivers taking the precaution of carrying a hammer in case, in a roll-over, the inability to open the doors made the windscreen the only means of escape and roll-overs were perhaps more likely in a Gullwing than many other machines, the nature of the swing axles sometimes inducing unwanted behavior in what was one of the fastest cars on the road although, in fairness, on the tyres available in the 1950s that was less of an issue than it would become on later, stickier rubber.

Mercedes-Benz 300 SLR (W196S), Stirling Moss & Denis Jenkinson, Mille Miglia, Italy, 1955.

The 300 SLR (W196S) was a sports car, nine of which were built to contest the 1955 World Sportscar Championship.  Essentially the W196 Formula One car with the straight-eight engine enlarged from 2.5 to 3.0 litres (152 to 183 cubic inches), the roadster is most famous for the run in the 1955 Mille Miglia in Italy which was won over a distance of 992 miles (1597 km) with an average speed of almost 100 mph (160 km/h); nothing like that has since been achieved.  There's infamy too attached to the 300 SLR; one being involved in the catastrophic crash and fire at Le Mans in 1955.

1955 300 SLR (W196S “Uhlenhaut” coupé). 

Two of the 300 SLRs were built with coupé bodies, complete with gull-wing doors.  Intended to be used in the 1955 Carrera Panamericana Mexico, they were rendered instantly redundant when both race and the Mercedes-Benz racing programme was cancelled after the Le Mans disaster.  The head of the programme, Rudolf Uhlenhaut (1906-1989), added an external muffler to one of the coupés, registered it for road use (such things were once possible when the planet was a happier place) and used it for a while as his company car.  It was then the fastest road-car in the world, an English journalist recording a top speed of 183 mph (295 km/h) on a quiet stretch of autobahn but Herr Uhlenhaut paid a price for the only partially effective muffler, needing hearing aids later in life.  Two were built (rot (red) & blau (blue), the names based on their interior trim) and for decades they remained either in the factory museum or making an occasional ceremonial appearance at race meetings.  However, in a surprise announcement, in June 2022 it was revealed rot had been sold in a private auction in Stuttgart for a world-record US$142 million, the most expensive car ever sold.  The buyer's identity was not released but it's believed rot is destined for a collection in the Middle East.  It's rumoured also the same buyer has offered US$100 million should an authentic 1929 Mercedes-Benz SSKL ever be uncovered.  

1970 Mercedes-Benz C-111 (1968-1970 (Wankel versions)).

Although the C-111 would have a second career in the late 1970s in a series of 5-cylinder diesel and V8 petrol engined cars used to set long-distance endurance records, its best remembered in its original incarnation as the lurid-colored (safety-orange according to the factory) three and four-rotor Wankel-engined gullwing coupés, sixteen of which were built.  The original was a pure test-bed for the Wankel engine in which so many manufacturers once had so much hope.  The first built looked like a failed high-school project but the second and third versions were both finished to production-car standards with typically high-quality German workmanship.  Although from the school of functional brutalism rather than the lovely things they might have been had styling been out-sourced to the Italians, the gull-winged wedges attracted much attention and soon cheques were enclosed in letters mailed to Stuttgart asking for one.  The cheques were returned, apparently there had never been plans for production even had the Wankel experiment proved a success.  The C-111 was fast, the four-rotor version said to reach 300 km/h (188 mph), faster than any production vehicle then available.

1991 Mercedes-Benz C112.

The C112 was an experimental mid-engined concept car built in 1991.  Designed to be essentially a road-going version of the Sauber-built C11 Group C prototype race car developed for the 1990 World Sports-Prototype Championship, it was powered by the 6.0 litre (366 cubic-inch) M120 V12 used in the R129 SL and C140/W140 S-Class variously between 1991-2001.  The C112 does appear to have been what the factory always claimed it was: purely a test-bed for technologies such as the electronically-controlled spring & damper units (which would later be included on some models as ABC (active body control)), traction control, rear wheel steering, tyre-pressure monitoring and distance-sensing radar.  As an indication it wasn't any sort of prototype intended for production, it offered no luggage space but, like the C111 twenty years earlier, it’s said hundreds of orders were received.  It was 1991 however and with the world in the depths of a severe recession, not even that would have been enough for a flirtation with thoughts of a production model.  After the C112, thoughts of a gull-wing were put on ice for another two decades, the SLR-McLaren (2003-2009) using what were technically “butterfly” door, hinged from the A-pillars.

2011 Mercedes-Benz SLS-AMG (2101-2014).

The factory’s most recent outing of the gull-wing door, the SLS, which used the naturally aspirated 6.2 litre (379 cubic inch) M159 DOHC V8, was produced between (2010-2014), a roadster version also available.  To allay any doubt, it was announced at the time of release that SLS stands for Super Leicht Sport (Super Light Sport) although such things are relative, the SLS a hefty 1600-odd kg (3,500 lb) although, in fairness, the original Gullwing wasn’t that much lighter and the SLS does pack a lot more gear, including windows which can be opened and air-conditioning.  In the way of modern marketing, many special versions were made available during the SLS’s relatively short life, even an all-wheel-drive electric version with a motor for each wheel.  Such is the lure of the gull-wing motif for Mercedes-Benz, it’s unlikely the SLS will be the last and a high-priced revival is expected to become a feature of the marketing cycle every couple of decades but we're unlikely to see any more V8s or V12s unless perhaps as a swan-song, AMG indicating recently they expect their 4.0 litre (244 cubic inch) V8 to remain in production for another ten years, Greta Thunberg (b 2003) and her henchmen the humorless EU bureaucrats permitting.

Lindsay Lohan at the Nicholas Kirkwood catwalk show, London Fashion Week 2015 with a prop vehicle (one of the gull-wing DMC DeLoreans modified closely to resemble the one used in the popular film Back to the Future (1985)).

Tesla Model X with falcon-wing doors.

Such was the allure of the 300 SL’s gull-wing doors that in the shadow they’ve cast for seventy-odd years, literally dozens of cars have appeared with the features, some of questionable aesthetic quality, some well-executed and while most were one-offs or produced only in small runs, there’s been the occasional (usually brief) success and of late some Teslas have been so equipped and with the novelty of them being the back doors, the front units conventionally hinged.  Tesla calls them “falcon wings” because the design was influenced by the bird.  However, the biomimicry was (for obvious reasons) not an attempt to gain the aerodynamic advantages of the falcon’s wing shape which affords exceptional maneuverability in flight but simply an adoption of the specific bone structure.  Unlike the fixed structure of the classic gull-wing door, the Tesla’s falcon-wing is fitted with an additional central joint which permits them to be opened in cramped spaces, aiding passenger ingress and egress.  Some Tesla engineers have however admitted the attraction of them as way to generate publicity and (hopefully) attract sales may have been considered during the design process.

Bricklin SV-1 (1974-1975, left) and DMC DeLorean (1981-1983, right).

Two of the best known of the doomed gull-wing cars were the Bricklin SV1 and the DeLorean, both the creations of individuals with interesting histories.  Malcolm Bricklin’s (b 1939) first flirtation with the automotive business was his introduction into the US market of the Subarus, built by the Japanese conglomerate Fuji Heavy Industries.  Having successfully imported the company’s scooters for some years, the model Mr Bricklin in 1968 chose was the 360, a tiny, egg-shaped device which had been sold in Japan for a decade, the rationale underlying his selection being it was so small and light it was exempt from just about any regulations.  Although really unsuited to US motoring conditions it was (at US$1300) several hundred dollars cheaper than a Volkswagen Beetle and had a fuel consumption around a third that delivered by the even the more economical US-built cars so it found a niche and some ten-thousand were sold before that gap in the market was saturated.  Ever imaginative, Mr Bricklin then took his hundreds of unsold 360s and re-purposed them essentially as large dodgem-cars, renting unused shopping-mall car-parks as ad-hoc race tracks and offering “laps” for as little as $US1.00.  He advertised “no speed limits” to attract the youth market but given the little machines took a reported 56 seconds for the 0-60 mph (0-100 km/h) run, reaching the legal limit in a car-park would have been a challenge.  Mr Bricklin achieved further success with Subaru’s more conventional (in a front wheel drive (FWD) context) 1000 and the corporation would later buy out his US interests for was thought to be a most lucrative transaction for both parties.

1969 Subaru 360 Deluxe.

His eponymous gull-winged creation was the SV-1 which, although nominally positioned as a “sports car” was marketed also as a “safety-vehicle” (hence the SV).  It certainly contained all of the safety features of the time and in that vein was offered mostly in lurid “high visibility” colors although the prototypes for an up-market “Chairman” version were displayed in more restrained black or white.  It was ahead of its time in one way, being fitted with neither ash-trays nor cigarette lighters, Mr Bricklin not approving of smoking and regarding the distractions of lighting-up while at the wheel a safety hazard.  Whether in stable conditions the car could have succeeded is speculative but the timing was extraordinarily unlucky.  The V8-powered car arrived on the market in 1974 shortly after the first oil shock saw a spike in the price of gasoline and in the midst of the recession and inflation which followed in the wake of that.  Between its introduction and demise, the costs of the SV1 more than doubled and there were disruptions to the production process because supply problems (or unpaid bills depending on who was asked) meant the AMC engine had to be replaced with a Ford power-plant.  By the time production ended, some 3000 had been built, but, not discouraged, Mr Bricklin would go on to import Fiat sports cars and the infamous Yugo before being involved with a variety of co-ventures with Chinese partners.

1970 Pontiac GTO convertible.

John DeLorean (1925–2005) was a genuinely gifted engineer who emerged as one of the charismatic characters responsible for some of the memorable machines General Motors (GM) produced during its golden age of the 1950s & 1960s.  Under Mr DeLorean’s leadership, Pontiac in 1964 released the GTO which is considered (though contested by some) the first “muscle car” and the one responsible for the whole genre which would flourish for a crazy half-dozen years and in 1969 the Grand Prix which defined a whole market segment.  Apparently, the Grand Prix, produced at a low cost and sold at a high price was one of the most profitable lines of the era.  Given this, Mr DeLorean expected a smooth path to the top of GM but for a variety of reasons there were internal tensions and in 1973 he resigned to pursue his dream of making his own car.  It took years however to reach fruition because the 1970s were troubled times and like the Bricklin SV1, the DeLorean Motor Company’s (DMC) gull-winged DeLorean was released into a world less welcoming then had been anticipated.  By 1981, the world was again in recession and the complicated web of financing arrangements and agreements with the UK government to subsidize productions could have worked only if the design was good, demand was strong and the product was well-built, none of which was true.

1969 Pontiac Grand Prix 428 SJ.

As the inventory of unsold cars grew, so did the debt and desperate for cash, Mr DeLorean was persuaded (apparently without great difficulty) to become involved in the cocaine trafficking business which certainly offered fast money but his co-conspirator turned out to be an FBI informant who was a career criminal seeking a reduced sentence (on a unrelated matter) by providing the bureau with “a big scalp”.  At trial in 1984, Mr DeLorean was acquitted on all charges under the rule of "entrapment" but by then DMC was long bankrupt.  In the years since, the car has found a cult following, something due more to its part in the Back to the Future films than any dynamic qualities it possessed.  It was competent as a road car despite the rear-engine configuration and the use of an uninspiring power-plant but, apart from the stainless-steel bodywork and of course the doors, it had little to commend it although over the years there have been a number of (ultimately aborted) revivals and plans remain afoot for an electric gull-wing machine using the name to be released in 2024 or 2025.