Blister

Blister (pronounced blis-tah or blis-ter)

(1) A thin vesicle on the skin, containing watery matter or serum and induced typically by caused by friction, pressure, burning, freezing, chemical irritation, disease or infection.

(2) In botany, a swelling on a plant.

(3) A swelling containing air or liquid, as on a painted surface.

(4) In medicine, something applied to the skin to raise a blister; a vesicatory (blister agent) or other applied medicine (mostly archaic).

(5) In glass-blowing, a relatively large bubble occurring during the process.

(5) In roofing, an enclosed pocket of air, which may be mixed with water or solvent vapor, trapped between impermeable layers of felt or between the membrane and substrate.

(7) In military jargon, a transparent bulge or dome on the fuselage of an airplane, usually for purposes of observation or mounting a gun but used sometimes as a housing for rearward air extraction.

(8) In photography, a bubble of air formed where the emulsion has separated from the base of a film, usually as a result of defective processing.

(9) In metallurgy, a form of smelted copper with a blistered surface.

(10) A dome or skylight on a building.

(11) The moving bubble in a spirit level.

(12) The small blister-like covering of plastic, usually affixed to a piece of cardboard or other flat sheet, and containing a small item (pens, hardware items etc).

(13) As “blister pack” or “blister card”, the packaging used for therapeutic or medicinal tablets in which the pills sit under small blister-like coverings, often labeled sequentially (1,2,3 or Mon, Tue, Wed etc) to aid patients.

(14) As “blister packaging” a type of pre-formed packaging made from plastic that contains cavities; a variant of bubble-wrap.

(15) In slang, an annoying person; an irritant.

(16) The rhyming slang for “sister”, thus the derived forms “little blister”, “big blister”, “evil blister” et al).

(17) In slang, a “B-lister” (ie a celebrity used for some purpose or invited to an event when it’s not possible to secure the services of an “A-Lister”.  In industry slang, the less successful celebrity managers are “blister agencies”.

(18) To raise a blister; to form or rise as a blister or blisters; to become blistered.

(19) To criticize or severely to rebuke (often as “blistering attack”).

(20) To beat or thrash; severely to punish.

(21) In cooking, to sear after blanching

1250–1300: From the Middle English blister & blester (thin vesicle on the skin containing watery matter), possibly from the Old French blestre (blister, lump, bump), probably from the Middle Dutch blyster & bluyster (swelling; blister), from the Old Norse blǣstri (a blowing), dative of blāstr (swelling).  All the European forms are from the primitive Indo-European bhlei- (to blow, swell), an extension of the root bhel- (to blow, swell).  The verb emerged late in the fifteenth century in the sense of “to become covered in blisters” and the medical use (of vesicatories) meaning “to raise blisters on” is in the literature from the 1540s.  The noun & adjective vesicatory dates from the early eighteenth century was from the Modern Latin vesicularis, from vesicula (little blister), diminutive of vesica (bladder).  In historic medicine, a vesicant (plural vesicants) or vesicatory (plural vesicatories) is used as an agent which induces blistering.  Typically a chemical compound, the primary purpose was intentionally to create a blister to draw blood or other bodily fluids to the surface, often in an attempt to relieve inflammation, improve circulation in a specific area, or treat various conditions indirectly by this counter-irritation technique.  Historically, vesicatories were commonly used with substances like cantharidin (from blister beetles) being applied to the skin to achieve this effect but in modern medicine the practice is (mostly) obsolete because more effective and less invasive treatments now exist.  Blister & blistering are nouns, verbs & adjectives, blistered is a verb & adjective, and blisterlike, blisterless & blistery are adjectives; the noun plural is blisters.

1968 MGC Roadster with bulge, blister and the bulge's curious stainless steel trim.

The MGC (1967-1969) was created by replacing the MGB’s (1962-1980) 1.8 litre four cylinder engine with a 2.9 litre (178 cubic inch) straight-six, something which necessitated a number of changes, one of which was the bonnet (hood) which gained a bulge to accommodate the revised placement of the radiator and, on the left-hand side, a small blister because the forward of the two carburettors sat just a little too high to fit even with the bulge.  Because to raise the whole bulge would have the bonnet look absurd, the decision was taken just to add a blister.  A blister (in this context) is of course a type of bulge and where a blister ends a bulge begins is just a convention of use, blisters informally defined as being smaller and of a “blister-like shape”, something recalling one appearing on one’s foot after a day in tight, new shoes.  A blister (which some seem to insist on calling a “teardrop” in they happen to assume that shape) also differs from a scoop in that it’s a enclosed structure whereas a scoop has an aperture to permit airflow.  There are however some creations in the shape of a typical blister which are used for air-extraction (the aperture to the rear) but these tend to be called “air ducts” rather than blisters.  MGC’s bulged and blistered bonnet has always been admired (especially by students of asymmetry) and both the originals (in aluminium which is an attraction in itself) and reproduction items are often used by MGB owners, either just for the visual appeal or to provide greater space for those who have installed a V8.  The apparently superfluous stainless steel trim piece in the bulge (there's no seam to conceal) is believed to be a motif recalling the small grill which was in a similar place on BMC’s (British Motor Corporation) old Austin-Healey 3000 (1959-1967), the MGC created because the 3000 couldn’t easily be modified to comply with the increasingly onerous US regulations.  Because there were doubts the cost of developing a replacement would ever be recovered, the decision was taken to build what was, in effect, a six-cylinder MGB.  The considerable additional weight of the bigger engine spoiled the MGB’s almost perfect balance and although a genuine 120 mph (195 km/h) machine, the MGC was never a critical or commercial success with only 8,999 (4,542 roadsters & 4,457 coupés) produced during its brief, two season life.

Republic P-47C Thunderbolt with the original colonnaded canopy (top) and the later P-47D with blister canopy (bottom).

When the Republic P-47 Thunderbolt (1941-1945) entered service with the USAAF (United States Army Air Force) in 1942, it was the largest, heaviest, single seat, piston-engined fighter ever produced, a distinction it enjoys to this day.  However, one thing it did share with some of its contemporaries was the replacement in later versions of the colonnaded canopy over the cockpit by an all-enveloping single panoramic structure which afforded the pilot unparalleled visibility, something made possible by advances in injection molding to fabricate shapes in Perspex, then still a quite novel material.  These canopies were adopted also for later versions of the The Supermarine Spitfire (1938-1948) and the North American P-51 Mustang (1941-1946) but the historians of aviation seem never to have settled on a description, opinion divided between “bubble-top” and “blister top”.

In military aviation, “blister” is more familiar as a use to describe the transparent bulge (or dome) on the fuselage of an airplane, usually for purposes of observation or mounting a gun but used sometimes to house a rearward air extraction device.  However, because of other linguistic traditions in military design, the “blisters” used as gun mounting position were also described with other words, the use sometimes a little “loose”.  One term was barbette (plural barbettes), a borrowing from the French and used historically to mean (1) a mound of earth or a platform in a fortification, on which guns are mounted to fire over the parapet and (2) (in naval use), the inside fixed trunk of a warship's gun-mounting, on which the turret revolves and used to contain the hoists for shells and cordite from the shell-room and magazine.

Also used was turret, from the Middle English touret, from the Old French torete (which endures in Modern French as tourette), a diminutive of tour (tower), from the Latin turris.  In architecture (and later adoptions like electronic circuitry and railcar design), turrets tended to be variations of or analogous with “towers” but in military use there was a specific evolution.  The early military turrets were “siege towers”, effectively a “proto-tank” or APC (armoured personnel carrier) in the form of what was essentially a “building on wheels”, used to carry ladders, casting bridges, weapons and soldiers equipped with the tools and devices need to storm so fortified structure such as a fort or castle.  From this evolved the still current idea notion of an armoured, rotating gun installation on a fort or warship and as powered land vehicles and later flying machines (aircraft) were developed, the term was adopted for their various forms of specialized gun mountings.  In aircraft, the term blister came later, and allusion to the blister-like shape increasingly used to optimize aerodynamic efficiency, something of little concern to admiralties.

Mar-a-Lago, Ocean Boulevard, Palm Beach, Florida.

Another military blister was the cupola (plural cupolas or cupolae), from the Italian cupola, from the Late Latin cūpula (a small cask; a little tub), from the Classical Latin cuppella, from cuppa & cūpa (tub), from the Ancient Greek κύπελλον (kúpellon) (small cup), the construct being cūp(a) + -ula, from the primitive Indo-European -dlom (the instrumental suffix) and used as a noun suffix denoting an instrument.  The origin in Latin was based on the resemblance to an upturned cup, hence the use to describe the rounded top of just about any structure where no specific descriptor existed.  In military use, a cupola is basically a helmet fixed in place and that may be on a building, a ship or an armored vehicle, the function being to protect the head while offering a field of view.  Sometimes, especially in tanks or armored cars, guns or flame-throwers were integrated into cupolas and in naval gunnery, there was the special use to describe the dome-like structures protecting a (usually single) gun mounting, something which distinguished them from the larger, flatter constructions which fulfilled the same purpose for multi-gun batteries.  Turrets and cupolas are among the architectural features of Mar-a-Lago, Donald Trump’s (b 1946; US president 2017-2021) winter palace on Ocean Boulevard, Palm Beach, Florida.

Northrop P-61 Black Widow:  A prototype with the troublesome dorsal blister turret (left), the early production P-61A with the blister removed (upper right) and the later P-61B with the blister restored (lower right).

The attractive aerodynamic properties of the classic blister shape was an obvious choice for use in aircraft but even then, they weren’t a complete solution.  The Northrop P-61 Black Widow was the first aircraft designed from a clean sheet of paper as a night-fighter, cognizant of the experience of the RAF (Royal Air Force) which during the Luftwaffe’s (the German air force) Blitz of London (1940-1941) had pressed into service day-fighter interceptors.  Designed to accommodate on-board radar, the Black Widow was heavily gunned and incorporated notable US innovations such as remote control firing mechanisms.  Part of the original was a remotely-controlled blister turret on the dorsal section which proved the shape’s aerodynamic properties worked only when pointed in the appropriate direction; when pointed at right-angles to the aircraft’s centre-line, the tail section between the twin-booms suffered severe buffeting.  Accordingly, the blister turret was deleted from the early production versions but the early experience of the military confirmed the need for additional firepower and after a re-design, it was restored to the slightly lengthened P-61B.  The integration of so many novel aspects of design meant the P-61 didn’t enter service until 1944 and, as the first of its breed, it was never a wholly satisfactory night-fighter but it was robust, had good handling characteristics and offered the advantage of being able to carry a heavy payload which meant it could operate as a nocturnal intruder with a lethal disposable load.  It was however in some ways a demanding airframe to operate, the manufacturer recommending that when fully-loaded in its heaviest configuration, a take-off run-up of 3 miles (4.8 km) was required.  Although its service in World War II (1939-1945) was limited, remarkably, like the de Havilland Mosquito (DH.98), the Black Widow was also a Cold War fighter, both in service until 1951-1952 because of a technology deficit which meant it wasn’t until then jet-powered night-fighters came into service.  The Black Widow was in 1949 (by then designated F-51), the first aircraft in service in the embryonic USADC (US Air Defense Command), formed to defend the country from any Soviet intrusion or attack.

Xanax (Alprazolam), a fast-acting benzodiazepine.  It is marketed as anti-anxiety medication and supplied in blister packs.

Lindsay Lohan released the track Xanax in 2019.  With a contribution from Finnish pop star Alma (Alma-Sofia Miettinen; b 1996), the accompanying music video was said to be “a compilation of vignettes of life”, Xanax reported as being inspired by Ms Lohan’s “personal life, including an ex-boyfriend and toxic friends”.  Structurally, Xanax was quoted as being based around "an interpolation of" Better Off Alone, by Dutch Eurodance-pop collective Alice Deejay, slowed to a Xanax-appropriate tempo.

Xanax by Lindsay Lohan

I don't like the parties in LA, I go home

In a bad mood, pass out, wake up alone

Just to do it all over again, oh

Looking for you

Only one reason I came here

Too many people, I can't hear

Damn, I got here at ten

Now it's 4 AM

I can't be in this club

It's too crowded and I'm fucked

Ain't nobody here for love

Ain't nobody care about us

I got social anxiety, but you're like Xanax to me, yeah

Social anxiety, when you kiss me, I can't breathe

No, I can't be in this club

It's too crowded and I'm fucked

Ain't nobody here for love

Ain't nobody care 'bout us

 

I got social anxiety, but you're like Xanax to me, yeah

Social anxiety, when you kiss me, I can't breathe, yeah

 

But you're like Xanax to me

When you kiss me, I can't breathe

 

I try to stay away from you, but you get me high

Only person in this town that I like

Guess I can take one more trip for the night

Just for the night

 

Only one reason I came here

Too many people, I can't hear

Damn, I got here at ten

Now it's 4 AM

 

I can't be in this club

It's too crowded and I'm fucked

Ain't nobody here for love

Ain't nobody care about us

I got social anxiety, but you're like Xanax to me, yeah

Social anxiety, when you kiss me, I can't breathe

No, I can't be in this club

It's too crowded and I'm fucked

Ain't nobody here for love

Ain't nobody care 'bout us

 

I got social anxiety, but you're like Xanax to me, yeah

Social anxiety, when you kiss me, I can't breathe, yeah

 

But you're like Xanax to me

When you kiss me, I can't breathe

 

But you're like Xanax to me

When you kiss me, I can't breathe

Xanax lyrics Universal © Music Publishing Group

Gasoline

Gasoline (pronounced gas-uh-leen)

(1) A volatile, flammable liquid mixture of hydrocarbons, obtained from petroleum and used as fuel in internal-combustion engines or as a solvent.

(2) In the slang of drug users, marijuana, especially if notably potent (also as gas and there’s evidence both gas and gasoline have been used of other drugs).

(3) In slang, a cocktail made by mixing a spirit with an energy drink (the original believed to be a combination of vodka & Red Bull).

As used to describe the “light, volatile liquid obtained from distillation of petroleum”, gasoline dates from 1864 and was a variant of Gasolene which in the UK had been trade-marked the year before.  The word gasolene was from a trade-marked brand of petroleum-derived lighting oil, registered in 1862 which was based on the surname of English publisher and tea & coffee merchant John Cassell (1817–1865) who branched out into lighting fuel, marketed as both Cazeline & Cazzoline.  His publishing house Cassell & Co endures today as an imprint of the Octopus Publishing Group.  The surname Cassell was from the Anglo-Norman castel (a cognate of the English castle), from the Old French castel, from the Latin castellum, a diminutive of castrum.  The -eline suffix was from the Ancient Greek ἔλαιον (élaion) (oil, olive oil), from ἐλαία (elaía).  Etymologists speculate the spelling of gasolene (and thus gasoline) may have been influenced by Gazeline, an Irish product which was a clone of Cazzoline, either the promoters liked the assumed association with “gas” or simply they found it a more attractive word.  It’s though the general construct gas-o-line was built with the “o” representing the Latin oleum (oil) and the ending a borrowing from the chemical suffix -ine.  The alternative form gasolene is extinct in every market except Jamaica.  Gasoline is a noun & adjective and gasolinic is an adjective; the noun plural is gasolines.

Moderne BV-Aral Tankstelle (modern BV-Aral gas station), Bochum, FRG (Federal Republic of Germany (West Germany)), 1958.  The cars are an Opel Rekord (left), a Volkswagen Type 14 (Karmann Ghia) coupé (centre) and a Volkswagen Type 1 (Beetle) (right).  In the background stands the head office of the oil company BV-Aral AG.

In the US, the shortened form “gas” was in common use by at least 1897 but on the pattern of use typically found in other words, it’s likely it was around almost as soon as gasoline went on sale.  The “gas station” (place to fill up one’s automobile (“gassing up”) with gasoline by use of a “gas pump”) was recorded in California in 1916 and was in national use by the early 1920s.  The “gas pedal” (the accelerator) was first recorded in 1908 and is still used even in markets where the term petrol is preferred, as in the phrase “step on the gas” (depress the accelerator (ie go faster)) which is used generally to suggest increasing speed or effort and is not confined to automobiles.  The term gas-guzzler (a car with a high fuel consumption) was coined in 1973 after the first oil shock and in 1978 the US federal government imposed the first stage of its long-running “gas-guzzler tax”.  The noun gasohol (a gasoline with a small percentage of ethanol was coined in 1975; the mix was another reaction to the increase in the oil price and occasional shortages in the era.  To “pour gasoline on the fire” is a suggestion some action is making an already bad situation worse.  The term Avgas (the construct being av(iation) + gas) was coined during the First World War (1914-1918) when it was found the mix used in automobiles was unsuitable for aircraft which needed a mixture with higher specific energy (ie high octane).  The use in North America (and a handful of other places) of “gas” to refer to what is otherwise generally known as “petrol” sometimes mystifies because in many markets the usual distinction for road transport is between vehicles fueled by diesel, petrol & gas (usually liquid petroleum gas (LPG) or compressed natural gas (CNG).

Entertainment Tonight (ET) deconstructs Lindsay Lohan’s dance moves at a New Jersey gas station, October 2019.  According to ET, the routine was executed between gas pumps 3 & 4.

In chemistry, gas is matter in an intermediate state between liquid and plasma that can be contained only if it is fully surrounded by a solid (or in a bubble of liquid, or held together by gravitational pull); it can condense into a liquid, or can (in care cases) become a solid directly by deposition. The common synonym is vapor (also as vapour).  The word was a borrowing from the Dutch gas which was coined by chemist Brussels-based chemist & physician Jan Baptist van Helmont (1580–1644), from the Ancient Greek χάος (kháos) (chasm, void, empty space) and there may also have been some influence from geest (breath, vapour, spirit).  More speculatively, there were also the writings of the Swiss physician, alchemist, lay theologian, and philosopher of the German Renaissance Theophrastus von Hohenheim (circa 1493-1541 and known usually as Paracelsus) who wrote of kháos in the occultist’s  sense of “proper elements of spirits”" or "ultra-rarified water”, both of which accorded with van Helmont's definition of gas which he introduced to the world in Ortus medicinae, vel opera et opuscula omnia (The Origin of Medicine, or Complete Works (1648)) with the words Hunc spiritum, incognitum hactenus, novo nomine gas voco (“This vapor, hitherto unknown, I call by a new name, ‘gas’”).

Lindsay Lohan gassing up her Porsche, Malibu, California, April 2020.

The use in science in the modern sense dates from 1779 and it was adopted for specific applications as technologies emerged or were commercialized: To describe a “combustible mix of vapors” the term “coal gas” was first used in 1794; the use in medicine for the anesthetic nitrous oxide was from 1794 (made famous in dentistry as “laughing gas” although the laughter was induced by impurities introduced in the early production processes rather than the inherent properties of N₂O); “Poison gas” was from 1900" (1900).  The meaning “intestinal vapors” emerged in 1882 while the not unrelated sense of “empty talk” was from 1847 (meaning something like “hot air”) although more positively, by 1953 “it’s a gas” meant “something exciting or excellent”, “a gasser” in 1944 meaning much the same.  James Joyce (1882–1941) in Dubliners (1914) used gas to mean “fun, a joke”, an Anglo-Irish form thought linked to the use of laughing gas in dentistry.  In drag racing “gassers” (so named because they were fueled by gasoline rather than methanol or nitromethane) were the most common of the highly modified road cars in the early days of the sport but the National Hot Rod Association (NHRA) retired the category in 1972 and split the participation of gasoline-powered units into a number of classes.

Art Deco gas station, Beverly Hills, Los Angeles, California, 1931.

The “gas-works” was first described in 1914 and was a little misleading because they were actually bulk-storage facilities from which gas was distributed either by fixed lines or cylinders delivered to the premises.  The kitchen appliance the “gas-oven” was mentioned first in 1851 although “gas-stove” by then had been in use for three years.  The notorious “gas chambers” used by the Nazis in their mass-murder programmes are most associated with the attempt to exterminate the Jews of Europe but the first were actually built in 1939, as part of Aktion T4 which involved the killing of those with physical and intellectual disabilities.  These early facilities used carbon monoxide and were built within Germany and served also to murder other prisoners and although by later standards inefficient, were adequate for the numbers involved.  As territories to the east were occupied, similar structures were built and there were ever experiments with “mobile chambers”, large air-tight van coachwork added to truck chassis into which the exhaust gasses were ducted.  Again, these worked but by 1941 the Nazis now wished to exterminate millions and the most efficient method was found to be scaled-up chambers (disguised as shower rooms) into which the hydrogen cyanide-based anti-vermin fumigant Zyklon B was introduced, permitting a throughput at the most productive death camps of some 5500 at day, sometimes for months at a time.  The term “gas chamber” was widely used during the post-war hearings conducted by the International Military Tribunal (IMT) at Nuremberg (1945-1946) but as a method of judicial execution, many nations had by then used them at various times and the US only recently abandoned use of the method.

Roadsters line up to gas up, Gasoline Alley, Indianapolis Motor Speedway, May 1960.  This was one of the official postcards sold in the speedway's shop.

Gasoline Alley is the name of the garage area at the Indianapolis Motor Speedway.  That wasn’t the original name but in the 1920s, “gasoline alley” was the drivers’ slang for the forecourt at the back of the garages where the cars were taken to refuel.  Whether linked or not, there was in the era a popular newspaper comic strip called Gasoline Alley and the use of the name soon extended to the strip dividing the two rows of garages.  It caught the public imagination and the facility managers in the early 1950s added signage which meant the whole garage area became associated with the term.  As a result of the reconstructions necessitated by fires, modernization & expansion, Gasoline Alley is not recognizable compared to its original appearance but the name remains, even thought actual gasoline is now rarely pumped, the open-wheel cars switching first to methanol (1965) and later (2006) ethanol and it’s only when other categories use the track that gasoline is in the tanks.  If the sport is compelled to convert to electric (or hopefully hydrogen) propulsion, the name is unlikely to change.

Rod Stewart (b 1945), Gasoline Alley (1970).

Ether

Ether (pronounced ee-ther)

(1) In chemistry, Pharmacology and (pre-modern) surgery, A colorless, highly volatile, flammable liquid (C₄H₁₀O), having an aromatic odor and sweet, burning taste, derived from ethyl alcohol by the action of sulfuric acid.  It was used as a powerful solvent and as an inhalant anesthetic (also called diethyl ether, diethyl oxide, ethyl ether, ethyl oxide, sulfuric ether.

(2) In pre-modern chemistry, one of a class of compounds in which two organic groups are attached directly to an oxygen atom (the general formula ROR), as in diethyl ether (C₂H₅OC₂H₅).

(3) In Greek mythology, the upper regions of the atmosphere; clear sky or heaven (and from this long a rarely used word for “air”).

(4) In physics, a hypothetical substance supposed to occupy all space, postulated to account for the propagation of electromagnetic radiation through space, an idea picked up in the early days of radio broadcasting, the signal said to be “in the ether”.

(5) In chemistry, a starting fluid.

(6) Figuratively, a particular quality created by or surrounding an object, person, or place; an atmosphere; an aura (probably most familiar in the form ethereal). 

1350-1400: From the Middle English ether (the caelum aetherum of ancient cosmology in which the planets orbit; a shining, fluid substance described as a form of air or fire; air), from the Middle French & Anglo-Norman ether, from the Old French aether (highest and purest part of the atmosphere; the medium supposedly filling the upper regions of space), from the Ancient Greek αἰθήρ (aithḗr) (purer upper air of the atmosphere; heaven, sky; theoretical medium supposed to fill unoccupied space and transmit heat and light), (akin to aíthein (to glow, burn)) or directly from its etymon New Latin aethēr (highest and purest part of the atmosphere; air; heavens, sky; light of day; ethereal matter surrounding a deity).  The ultimate source of the Greek was αἴθω (aíthō) (to burn, ignite; to blaze, shine), from the primitive Indo-European heyd- (to burn; fire).  It was related to the Old English ād (funeral pyre) and the Latin aestus (heat).  As late as the nineteenth century, it was not uncommon in English for the Latin-derived spelling aether to be used, probably because so much of what was in the books of apothecaries remained for so long unchanged.  The German-born chemist August Sigmund Frobenius (circa 1690-1741) was the first to use the name for the volatile chemical, his bestowal based on its properties.  The name entered English science in 1757 although it wasn’t until 1842 the anaesthetic properties were fully documented.  The English word was cognate with the obsolete Italian etere (ether & ethera both obsolete), the Middle Dutch ether, the modern Dutch ether (aether obsolete), the German Äther, the Portuguese éter and the Spanish éter.

In ancient cosmology, ether was the element filling all space beyond the sphere of the moon, constituting the substance of the stars and planets; in the imagination of Antiquity it was held by one school of thought to be a purer form of fire or air, by another as a fifth element.  From the seventeenth to nineteenth centuries, ether was part of scientific orthodoxy and the technical word for an assumed framework within which the forces of the universe interacted, perhaps without material properties.  As the scientific method evolved increasingly to demand proof of theories, doubts were expressed about the validity of the traditional view and in 1887 an experiment by American physicists Albert Michelson (1852-1931) and Edward Morley (1838-1923) cast such doubts on the notion that among others, Albert Einstein (1879-1955) was moved to begin calculations and the view of the nature of ether from Antiquity was completely dismissed after conclusive proof of the theory of relativity in 1919.  Despite that, having first been so used in 1899, the word endured well into the twentieth century to describe the path of the then seemingly mysterious radio broadcasts.

Lindsay Lohan during her dabble with Ethereum fueled NFT drops.  

Although the volatility and churn rate make it a hard sector to track, there are apparently over 20,000 currently active (in the sense of being listed somewhere and thus able to be traded) cryptocurrencies.  There are obvious attractions to creating one's own virtual currency because in a sense one is creating one's own money (usually in the millions) and if one can convince others (and guides to market manipulation have been published) to exchange their convertible currency for one's tokens, it can be a good business model.  One thankless task associated with cryptocurrencies however is coming up with a suitable name, something not of great importance once the creation gains critical mass but possibly quite influential when first listed.  It must be something like thinking of names for racehorses but harder still because not only must it be unique but it should also not be too close to other financial products (not just other virtual currencies).  Ethereum (ETH) was coined by Russian-Canadian programmer Vitalik Buterin (b 1994) who has in interviews revealed he chose the name after browsing Wikipedia for a list of fictional elements on based on ether.  One can certainly see the link and it makes more sense than the earlier Ethernet, originally a trademark of the Xerox Corporation, the construct being ether +‎ net(work).  Ethernet was a collection of cabling and network connectivity protocols standards for bus topology computer networks and to use the word "ether" was a bit of a leap, everything originally connected by cable whereas at least part of the Ethereum traffic travels through the ether (as it was understood in Antiquity).  With Ethernet cabling, there was thick and thin Ethernet and the physical cabling literally was thick and thin, the choice dictated by things like the distance to be covered, the number of nodes to be connected and the available budget.  In the world of cryptocurrency, think & thin means "going through thick & thin", hodling (holding) one's coins no matter what the fluctuations.

Insoluble

Insoluble (pronounced in-sol-yuh-buhl)

(1) A substance which cannot be dissolved, broken down or dispersed.

(2) That which cannot be solved; unsolvable; insolvable.

(3) That which cannot be explained; mysterious or inexplicable.

(4) In chemistry, a substance incapable of dissolving in a solvent.

1350-1400: From the Middle English insoluble (indestructible, unable to be loosened), from the Old French insoluble or the Latin insolūbilis (that which cannot be loosened), the construct being in (not) + solubilis (soluble) which replaced the Middle English insolible; Middle French borrowed the word from the Latin as insoluble.  In the sciences, the noun insolubility in the sense of “incapability of dissolving in a liquid” dates from 1754 (insoluble having conveyed that since 1713), the Late Latin insolubilitas having previously been used and from 1791 it replaced the Latin insolubilis (that cannot be loosened) although in the early seventeenth century it’d been used of the marriage vow to mean "that cannot be dissolved".  The curious (and in many way annoying as such thing in English are) parallel meaning "that which cannot be solved" dates from 1722 and etymologists think it likely a separate formation from the earlier senses.  The related adjective irresolvable was from the 1650s and was from an assimilated form of in- (not, opposite of), the meaning "that which cannot be resolved into parts" emerging after 1785.  Insoluble is a noun & adjective, insolubility is a noun and insolubly is an adverb; the noun plural is insolubles.

In chemistry, insoluble has the precise technical meaning “incapable of dissolving in a solvent” and while it’s actually rare for absolutely no solute to dissolve at all, many substances are poorly soluble although a compound may be insoluble in one solvent yet fully miscible in another.  There’s also the influence of external factors, most notable temperature; increasing temperature frequently improves the solubility of a solute.  The figurative sense (that which cannot be solved; unsolvable; insolvable) is actually used less than other words or phrases which convey the idea, doubtlessly because of the parallel meaning.  Some claim that in Medieval scholarship, it was a tacit conviction among the learned that the insoluble question did not exist and that all that was ever required was to find the right man whose studies were so deep that he would eventually deduce the answer.  It’s a modern-sounding idea and recalls some of the optimistic phases the United States went through in the twentieth century; probably few think like that now.

Dr Rowan Williams (b 1950; Archbishop of Canterbury, 2002-2012) and Benedict XVI (1927–2022; pope 2005-2013, pope emeritus 2013-2022), discussing insoluble problems during the papal visit to the UK, Lambeth Palace, London, September 2010

One who probably never felt quite like that but may at times have allowed himself the odd, brief moment of optimism was former Archbishop of Canterbury Dr Rowan Williams, a literary critic and one-time Professor of Divinity at Oxford although his decade in Lambeth Palace seems to have cured him of that.  In late 2008, Dr Williams took a two month summer sabbatical to finish a book about his literary hero, the Russian novelist Fyodor Dostoevsky (1821-1881) which was published as Dostoevsky: Language, Faith and Fiction.  Those few weeks may have been among the happiest of his life, later reflecting that “It was a wonderful experience actually, just being able to get up in the morning and write instead go to committees and answer letters and try to solve insoluble problems in the church.”  To the suggestion that prayer might provide answers to at least some of those insoluble problems he replied “I'll do just that.”  Ten years on, there little indication his prayers were answered.

Gunk

Gunk (pronounced guhngk) 

(1) Any sticky or greasy residue or accumulation.

(2) A sub-culture of twenty-first century US males, combining elements of the modern gothic culture with punk rock.

(3) In mereology, any whole, the parts of which have further proper parts.

1949:  An Americanism, used to describe (usually dirty or unwanted) viscous substances, derived from Gunk, the trademark for a degreasing solvent, a thick liquid soap patented in 1932 by the AF Curran Company of Malden, Massachusetts.  Origin of the name is wholly speculative, the most likely offerings being (grime + funk) or (grime + junk).  Disgusting gunk has many synonyms:  quagmire, goo, silt, slime, muck, sludge, gunk, waste, debris, trash, powder, mud, mucus, grease, sediment, residue, grit, smoke, ash, dirt, oily, filth.

Gunk in Mereology

Gunk Engine Degreasant.

In mathematical logic and philosophy, mereology is the study of parts and the wholes they form.  Unlike set theory, the basis of which is the relation between a set and its elements, mereology is about the meronomic (part-whole relationships).  In mereology, gunk is any whole, the parts of which have parts and because parts are intrinsically transitive, any part of gunk must also be gunk, the implication of which is that gunk cannot contain any (indivisible) single-point parts.  So, for it to operate as it does, the known universe depends on gunky stuff like time.  Immediately controversial because of its challenges to nihilism, the term was first applied by Princeton philosopher David Lewis (1941-2001) in his 1991 publication, Parts of Classes.  Lewis claimed traces of the ideas could be found in writings from antiquity, through René Descartes (1596–1650) to Bertrand Russell (1872-1970); others found this lineage “arguable”.  Lewis’ mind worked in abstract space.  His construct of realism was (1) possible worlds exist, (2) every possible world does exist, (3) any possible world is wholly separate from any other and (4), our world is one of the possible worlds.

Herbie gunking Lindsay Lohan in Herbie: Fully Loaded (2005).

Paste

Paste (pronounced peyst)

(1) A mixture of flour and water, often with starch or the like, used as a glue to cause paper or other material to adhere to something.

(2) Any soft, smooth material or preparation which has characteristics of plasticity.

(3) In cooking and baking, a transitional state of some doughs, especially when prepared with shortening, as used for making pie crust and other types of pastry.

(4) Any of various semisoft fruit confections of pliable consistency (almond paste; guava paste etc).

(5) In manufactured food, a preparation of fish, tomatoes, or other food reduced to a smooth, soft mass, as for a relish or for seasoning (eg fish-paste).

(6) In pasta making, a transitional phase during preparation.

(7) A mixture of clay, water etc, for making pottery or porcelain.

(8) In jewelry manufacture, a brilliant, heavy hard lead (glass), (as strass), used for making artificial gems; an artificial gem of this material.

(9) In slang, a hard smack, blow, or punch, especially on the face; used figuratively (usually as “a pasting”) to describe a decisive defeat by a large margin in political, commercial or sporting contexts.

(10) In narcotics production, a by-product of the cocaine refinement process, later sold as a product and the basis for other forms.

(11) To fasten or stick with paste or the like.

(12) To cover with something applied by means of paste.

(13) In computers, to insert something cut or copied (text, images, links etc) into a file.

(14) In physics, a substance which behaves as a solid until a sufficiently large load or stress is applied, at which point it assumes the characteristics of a fluid.

(15) In mineralogy, the mineral substance in which other minerals are embedded.

(16) An alternative name for both pasta and pastry (both long obsolete).

1350–1400: From the Middle English paste (dough for the making of bread or pastry), from the Middle French paste (dough, pastry (and source of the French pâte)), from the Late Latin pasta (dough, pastry cake, paste), from the Ancient Greek πάστα pastē, pásta & pastá (barley porridge), a noun use of the neuter plural of pastós, verbid of pássein (to strew, to sprinkle).  The sense of a "glue mixture, a dough used as a plaster seal" dates from circa 1400, the meaning extended by circa 1600 to "a composition just moist enough to be soft without liquefying".  The use to refer to the heavy glass (made from ground quartz etc) and used most often costume jewelry (imitation gem stones) began in the 1600s.  A pasta was originally a kind of gruel sprinkled with salt, gaining the name probably by association with baste.  Paste is a doublet of pasta and patty.  Paste had actually been in use as a surname since the mid-twelfth century.  The present participle pasting and the past participle pasted & pasted.  In the context of adhesive agents, the synonyms include cement, fix, gum, plaster, stickum & glue.

The verb paste (to stick with paste or cement) dates from the 1560s and was derived from the noun, the meaning "apply paste to, cover by pasting over" emerging circa 1600.  The slang sense "hit hard" was first noted in 1846, probably an alteration of baste (in the sense of "beat" and thus related in meaning to lambaste) influenced by some sense of paste.  The form in the Middle English was pasten (to make a paste of; bake in a pastry).  The noun “paste-up” was first used in 1930 in the printing trades to refer to "a plan of a page with the position of text, illustrations etc indicated", a direct formalization of the oral phrase, the adoption of the “pasteboard” on which the positions were marked, a simultaneous development (since the 1540s, pasteboard had been a type of thick paper, gaining the name from the original method of construction being several single sheets pasted together).  The term pastiness (resembling paste in consistence or color) dates from the 1650s and was typically applied to someone looking slightly grey (a la the flour & water mix of paste) and thus ill, rather than someone with a pale complexion.

Based in Atlanta, Georgia, Paste Magazine is a monthly music and entertainment digital publication, the evolution of which is emblematic of the effect the internet has exerted on the industry.  Taking advantage of the low-cost entry to global distribution offered by the conjunction of weightless production and the roll-out of broadband, Paste began in 1998 as a website which, as revenue grew, was able, between 2002-2010, to expand to include glossy print editions.  However, the decline in subscriptions and the always low newsstand sales forced it, like many, to revert to an exclusively on-line presence.  Focused on its target demographic, the content is what some analysts describe as: “middlebrow pop-culture, beyond a fanzine, short of academic analysis.”

The pastry in the sense of “food made with or from paste or having it as a principal ingredient” was first described as such in the mid-fifteenth century although as a dish, it’s an ancient recipe.  It wasn’t originally limited to sweet & fruit-filled creations and the adoption by the Middle English paste is thought to have been influenced by the Old French pastoierie (pastry (source of the Modern French pâtisserie)), from pastoier (pastry cook) or else the Medieval Latin pasteria (pastry).  There had been pastry cooks and chefs since the 1650s but the now-familiar specific sense of "small confection made of pastry" didn’t become standardized until the years immediately before the First World War (1914-1918).  Toothpaste (also as tooth-paste) was first sold in 1832.  Earlier there had been tooth-powder (from the 1540s) and tooth-soap (circa 1600), both of which followed the tradition method used for centuries to make a paste for cleaning which was to mix powdered charcoal (or soot) with salt and water until the desired consistency was achieved.

The adjectival sense “cut-and-paste” (made or composed by piecing together existing parts) actually pre-dates computers, noted first in 1938 to refer to edited photographs (also known as ”trick photography”).  The phrase was borrowed in the mid-late 1950s to describe either outright plagiarism or work created variously in haste, carelessly, or without any sense of originally or inspiration and was applied especially to journalism.  The companion term “copy and paste” in the 1970s joined “cut and paste” as technology evolved; in the 1980s, the two processes were integrated into computer operating systems, the two steps usually mediated by the user.  To illustrate the practice, this blog makes great use of "copy and paste", reveals little which is original and seems not at all inspired.  

Rubber pasties on dagmars: 1957 Cadillac Eldorado Brougham.

Pasties were adhesive patches women wore over the nipples, the purpose either (1) to permit exotic dancers to perform while still conforming with local ordinances or (2) as a modesty device to prevent unwanted protrusions through clothing; the devices had been long available but were first recorded as being sold using the plural diminutive from the verb in 1957 and a rubber analogue was sometimes used on the dagmars which had been added to US automobiles since the 1940s.  Often supposed to have been inspired by the propeller hubs of twin-engined fighter aircraft, the designers were actually invoking the motif of a speeding artillery shell and it was only later they came to be associated with anything anatomical.  By the mid-1950s they'd developed to become increasingly large and prominent, the dagmar’s rubber pastie protecting both the device and whatever (or whomever) it might hit.

Packed as a tablet and approved by the US FDA (Federal Drug Administration) in April 2019, Gelesis’s (a biotech company) Plenity is an oral, non-systemic, superabsorbent hydrogel developed for the treatment of overweight and obesity.  It's listed by the FDA as a medical device rather than a medicine because it achieves its primary intended purpose through mechanical modes of action.  The content of the tablets is made with citric acid and cellulose to create a non-toxic paste.

Gelesis released Plenity into a buoyant market for tech stocks, underwritten by a SPAC (Special Purpose Acquisition Corporation).  Results however, dependent essentially on commission-based sales staff marketing the paste pills directly to family doctors (GPs), proved disappointing and in early 2022 the company announced layoffs.  In common with many tech stocks, valuations of the so-called "SPAC merger deals", sharply have plummeted.

Good things can be wrapped or covered in pastry.  Lindsay Lohan’s chicken pot pie with leeks and veal meatballs appears in Jamie’s Friday Night Feast Cookbook (Penguin Books, 2018).  It serves 8.

Ingredients

2 onions
2 carrots
2 small potatoes
2 medium leeks
Olive oil
300g free-range chicken thighs, skin off, bone out
300g skinless boneless free-range chicken breast
4 rashers of higher-welfare smoked streaky bacon
1 knob of unsalted butter
50g plain flour
700ml organic chicken stock
2 tablespoons English mustard
1 heaped tablespoon creme fraiche
A ½ bunch (15g) of fresh woody herbs
White pepper
3 sprigs of fresh sage
300g minced higher-welfare veal (20% fat)
1 large free-range egg
300g plain flour, plus extra for dusting (for pastry)
100g shredded suet (for pastry)
100g unsalted butter (cold) (for pastry)

Instructions

Preheat oven to 180C (350F).  Peel and roughly chop the onions and carrots, then peel the potatoes and chop into 2cm (¾ inch) chunks.  Trim, halve and wash the leeks, then finely slice.

Place a large pan on a medium heat with one tablespoon of oil.  Chop chicken into 3cm (1¼ inch) chunks, roughly chop bacon and add both to the pan.  Cook for a few minutes, or until lightly golden. A dd the onions, carrots, potatoes and leeks, then cook for a further 15 minutes or until softened.  Add the butter, then stir in the flour to coat.

Gradually pour in the stock, then add the mustard and creme fraiche.  Tie the woody herb sprigs together with string to make a bouquet garni and add to the pan. Cook for 10 more minutes, stirring regularly, then season with white pepper.

Meanwhile, for the pastry, put the flour and a good pinch of sea salt into a bowl with the suet; cube and add the butter. Using the thumb and forefingers, rub the fat into the flour until it resembles coarse breadcrumbs.

Slowly stir in 100ml of ice-cold water, then use the hands to bring it together into a ball without over-working.  Wrap in clingfilm and place in the fridge to chill for at least 30 minutes, during which, make the meatballs.

Pick and finely chop the sage, season with salt and pepper, then with the hands scrunch and mix with the veal.  Roll into 3cm (1¼ inch) balls, gently place in a large pan on a medium heat with half a tablespoon of oil and cook for 10 minutes or until golden all over, jiggling occasionally for even cooking.

Transfer the pie filling to a large (250 x 300mm (10-12 inch)) oval dish, discarding the bouquet garni.  Leave to cool, then dot the meatballs on top.

Roll out pastry on a clean, flour-dusted surface until it's slightly bigger than pie dish. Eggwash edges of dish, then place the pastry on top of the pie, trimming off any overhang, pinching the edges to seal and make a small incision in the centre. Use any spare pastry to decorate the pie if preferred.  Eggwash the top, bake for 50 minutes or until the pastry is golden and the pie is piping hot.  Leave to stand for 10 minutes before serving.

Solidifying coca paste.

As late as the mid-1970s, in the United States, the medical establishment and scientists working the field entertained few concerns about cocaine, essentially because (1) thousands of years of use in South & Central America suggested the base ingredient was not harmful, (2) there were any number of narcotics flooding the US market which were of greater concern, (3) cocaine was anyway so expensive that it was used only by a tiny number of people and (4) alcohol and tobacco use produced outcomes in society a thousand time worse (doctors emphasizing the last two points by pointing out that while clinicians would regularly see cirrhosis of the liver, most would spend their entire careers never seeing a case induced by vintage champagne).

Indeed, in the late 1970s, the only people concerned about cocaine use in the US seemed to be politicians who equated the drug’s widespread depiction in film and television as a glamorized thing associated with wealth, power and decadence, with an actual popularity of consumption.  Hence the origins of the moral panic around cocaine, something perhaps inevitable after the white power was “rediscovered” earlier in the decade after being barely noticed by law enforcement agencies since the 1940s.  Many US scientists even advocated legalization.  What changed both the concerns and the consequences in the US was paste.  Known in Peru and Bolivia as pasta basica de cocaina (or more commonly) basé or basuco, paste was a glutinous substance that oozed from the solvent-soaked coco leaves during the manufacture of the white powder ultimately sold in North America, Europe and other first-world markets.  Once discarded as a unwanted by-product, those with access to the paste had begun drying it to crumble in cigarettes.  Smoked, it was absorbed almost instantly through the air sacs of the lungs (which have the surface area the size of a tennis court) a vastly more efficient mechanism compared with the nasal membranes which are the passage for the traditional "snorting" of cocaine.  Reaching the brain within twenty seconds, the difference was extraordinary, users reporting a hit which offered an intensity of pleasure like no other.  Unfortunately, there was a price to pay, the rush lasting only minutes, replaced as it dissipated by a craving as intense as the initial experience had been, addiction instantaneous.

Paste however wasn’t suitable for distribution in rich markets because it truly was an industrial waste product with side-effects, containing residues of not only the toxic solvents used in the process such as kerosene and battery acid but stuff as diverse as lead and cement dust.  What was needed was a marketable, mass-produced form of paste because it had which had the two characteristics which cocaine lacked, an intense high and an irresistible addictiveness (like LSD, cocaine really isn’t addictive).  The solution emerged in the US in the early 1970s in a relatively straight-forward process which removed the hydrochloride salt from the refined powder, thereby freeing the cocaine base which could be heated and inhaled, hence the slang “freebasing”.  Chemically however, that was inefficient and made no economic sense so freebasing remained restricted to dealers, chemists (amateur & professional) or those with a lot of disposable income so inclined.

Rare though the economics of the early process made use, the consequences were noted and it was clear to researchers that if ever it became possible to produce an inhalable paste at scale and a lower price, there would be an epidemic of use.  A combination of circumstances, including the change by the Carter administration (1977-1981) of long-practiced US policies towards the helpful (if distasteful) administrations in Central America and the subsequent actions of the Reagan administration (1981-1989) in the region, meant that’s exactly what happened.  By the early 1980s, increases in volumes and improvements in distribution had seem the street price of cocaine in the US collapse, inducing producers to create a variation of paste, “crack” cocaine (named because of the sound it made while being consumed) which could be sold in tiny, conveniently packaged quantities to a vastly expanded market which, given the extraordinarily addictive properties, created its own inertia.  As a business model, it was good; cheap, transportable and enjoying a long shelf life, crack was highly profitable and the scourge of many US cities for more than a decade after the early 1980s.  Crack transformed the demographics of cocaine consumption in the US; what had been the preserve of an upper-middle class elite shifted to be the choice of the lowest-income communities and the effects were profound, including a reaction to the disparity in sentencing between the few cocaine users actually prosecuted and those imposed on huge numbers of crack users.

Still controversial are the allegations the Central Intelligence Agency (CIA) was involved with the distribution of crack in US cities as a by-product of the need to generate the funds needed to help effect regime change in Nicaragua, the money needed after the Congress shut off US assistance to the Contras, the rebel movement opposing the Sandinista government (which begat also the Iran-Contragate scandal).  An internal CIA investigation found that while there had been some involvement in trafficking narcotics to fund the Contras, there was nothing to link the agency with distribution in US cities.  Journalist Gary Webb's (1955-2004) 1998 book about the allegations (Dark Alliance) is an engaging but difficult read (a companion dramatis personae would help).  It covers so much that unless one is an expert in the history of the trade, it's hard to draw conclusions.  Relying on the reviews, one is inclined to be skeptical about many of the linkages he made.