Blip

Blip (pronounced blip)

(1) A spot of light on a radar screen indicating the position of a plane, submarine, or other object (also as pip); any similar use on other electronic equipment such as an oscilloscope.

(2) By adoption from the use in radar (and applied very loosely), any small spot of light on a display screen.

(3) In any tracked metric (typically revenue, sales etc), a brief and usually unexpected.

(4) In general use, an aberration, something unexpected and (usually) fleeting (often in the expression “blip on the radar”).

(5) In electronic transmissions (audible signals), a pip or bleep (also both onomatopoeic of short, single-pitch sounds).

(6) By extension, any low level, repetitive sound (rare).

(7) In the slang of software developers, a minor bug or glitch (retrospectively dubbed blips if promptly fixed (or re-labeled as “a feature”)).

(8) A specific data object (individual message or document) in the now defunct Google Wave software framework.

(9) In informal use, to move or proceed in short, irregular movements.

(10) In automotive use, briefly to apply the throttle when downshifting, to permit smoother gear-changing (the origin in the days of pre-synchromesh gearboxes, especially when straight-cut gears were used) and still used in competition to optimize performance but most instances by drivers of road cars are mere affectations (used as noun & verb).

(11) In informal use, abruptly to change a state (light to dark; on to off etc), sometimes implying motion.

(12) In broadcast media (and sometimes used on-line), to replace offensive or controversial words with a tone which renders them inaudible (a synonym of “bleep”, both words used in this contexts as nouns (a bleep) and verbs (to bleep out).  In live radio & TV, a junior producer or assistant was usually the designated “blipper” or “bleeper”.

1894: An onomatopoeic creation of sound symbolism, the speculation being it may have been based on the notion of “blink” (suggesting brevity) with the -p added to bli- as symbolic of an abrupt end, the original idea to capture the experience of a “popping sound”.  The use describing the sight and sound generated by radar equipment was first documented in 1945 but may have been in use earlier, the public dissemination of information about the technology restricted until the end of World War II (1939-1945).  The verbs (blipped & blipping) came into use in 1924 & 1925 respectively while the first documented use of the noun blipper dates from 1966 although “bleeper” appeared some fifteen year earlier and the role was acknowledge as early as the 1930s.  Blip is a noun & verb, blipped & blipping are verbs and blippy, blippier & blippiest are adjectives; the noun plural is blips.

The blipster

One unrelated modern portmanteau noun was blipster, the construct a blend of b(lack) + (h)ipster, used to refer to African-Americans (and presumably certain other peoples of color (PoC)) who have adopted the visual clues of hipster culture.  Whether the numbers of blipsters represent the sort of critical mass usually associated with the recognition of sub-cultures isn’t clear but as in medicine where a novel condition does not need to be widely distributed (something suffered even by a single patient can be defined and named as a syndrome), the coining of blipster could have been inspired by seeing just one individual who conformed to being (1) African American and (2) appearing in some ways to conform to the accepted parameters of hipsterism.  Labeling theory contains reservations about this approach but for etymologists it’s fine although there is always the risk of a gaboso (generalized observation based on single observation).  Predictably, there is debate about what constitutes authentic blipsterism because there are objections by some activists to PoCs either emulating sub-cultures identified as “white” or taking self-defining interest in aspects of that culture (such as those associated with hipsterism).  What seems to be acceptable is a stylistic fusion as long as the fashions are uniquely identifiable as linkable with traditional (ie modern, urban) African-American culture and the cultural content includes only black poets, hip-hop artists etc.

The Blipvert

The construct of blipvert (also historically blip-vert) was blip + vert.  Vert in this context was a clipping of advertisement (from the Middle French advertissement (statement calling attention)), the construct being advertise +‎ -ment.  The -ment suffix was from the Middle English -ment, from the Late Latin -amentum, from -mentum which came via Old French -ment.  It was used to form nouns from verbs, the nouns having the sense of "the action or result of what is denoted by the verb".  The suffix is most often attached to the stem without change, except when the stem ends in -dge, where the -e is sometimes dropped (abridgment, acknowledgment, judgment, lodgment et al), with the forms without -e preferred in American English.  The most widely known example of the spelling variation is probably judgment vs judgement.  In modern use, judgement is said to be a "free variation" word where either spelling is considered acceptable as long as use is consistent.  Like enquiry vs inquiry, this can be a handy where a convention of use can be structured to impart great clarity: judgment used when referring to judicial rulings and judgement for all other purposes although the approach is not without disadvantage given one might write of the judgement a judge exercised before delivering their judgment.  To those not aware of the convention, it could look just like a typo.

As both word and abbreviation “vert” has a number of historic meanings.  One form was from the Middle English vert, from Old French vert, from Vulgar Latin virdis (green; young, fresh, lively, youthful) (syncopated from Classical Latin viridis)  In now archaic use it meant (1) green undergrowth or other vegetation growing in a forest, as a potential cover for deer and (2) in feudal law a right granted to fell trees or cut shrubs in a forest.  The surviving use is in heraldry where it describes a shade of green, represented in engraving by diagonal parallel lines 45 degrees counter-clockwise.  As an abbreviation, it's used of vertebrate, vertex & vertical and as a clipping of convertible, used almost exclusively by members of the Chevrolet Corvette cult in the alliterative phrase "Vette vert", a double clipping from (Cor)vette (con)vert(ible).

Vette vert: 1967 Chevrolet Corvette L88 convertible which sold at auction in 2013 at Mecum Dallas for US$3,424,000, a bit short of the L88 coupé which the next year realized US$3,850,000 at Barrett-Jackson Scottsdale; that remains the record price paid for a Corvette at auction.  The L88 used a 427 cubic inch (7.0 litre) V8 with a single four barrel carburetor, tuned to produce between 540-560 (gross) horsepower although for official purposes it was rated at 430, slightly less than the advertised output of the L71 427 which, with three two barrel carburettors was the most powerful version recommended for “street” use.  The L88 was essentially a race-ready power-plant, civilized only to the extent cars which used it could be registered for road use but, demanding high-octane fuel available only in a limited number of locations and not offered with creature comforts like air-conditioning, it really was meant only for race tracks or drag strips.  For technical reasons, L71 buyers couldn’t order air-conditioning either but were at least allowed to have a radio, something the noise generated by the L88 would anyway have rendered mostly redundant.

When humans emulated CGI: Max Headroom, 1986, background by Amiga 1000.

A blipvert is a very brief advertisement (a duration of one second or less now the accepted definition although originally they could three times as long).  The concept first attracted widespread attention in the 1980s when it was an element in the popular television show Max Headroom, a production interesting for a number of reasons as well as introducing “blipvert” to a wide audience.  In Max Headroom, blipverts were understood as high-intensity television commercials which differed from the familiar form in that instead of being 20, 30 or 60 seconds long, they lasted but three, the line being they were a cynical device to discourage viewers from switching channels (“channel surfing” not then a term in general use).  The character Max Headroom (actually an actor made up to emulate something rendered with CGI (computer generated imagery)) was said to be pure software which had attained (or retained from the downloaded “copy” of the mind taken from a man killed after running into a “Max Headroom” warning sign in a car park) some form of consciousness and had decided to remain active within the television station’s computer network.  In this, the TV show followed a popular trope from science fiction, one which now underpins many of the warnings (not all by conspiracy theorists) about the implications of AI (artificial intelligence).  Although a creation of prosthetics rather than anything digital, the technique was made convincing by using a background generated on an Amiga 1000 (1985), a modest machine by today’s standards but a revelation at the time because not only was the graphics handling much better than on many more expensive workstations but even by 1990, despite what IBM and Microsoft were telling us, running multi-tasking software was a better experience on any Amiga than trying it on a PS/2 running OS/2.

On television, the stand-alone blipvert never became a mainstream advertising form because (1) it was difficult, (2) as devices to stimulate demand in most cases they appeared not to work and (3) the networks anyway discouraged it but the idea was immensely influential as an element in longer advertisements and found another home in the emerging genre of the music video, the technique perfected by the early 1990s; it was these uses which saw the accepted duration reduced from three seconds to one.  To the MTV generation (and their descendents on YouTube and TikTok), three seconds became a long time and prolonged exposure to the technique presumably improved the ability of those viewers to interpret such messages although that may have been as the cost of reducing the attention span.  Both those propositions are substantially unproven although it does seem clear the “video content generations” do have a greater ability to decode and interpret imagery which is separate for any explanatory text.  That is of course stating the obvious; someone who reads much tends to become better at interpreting words than those who read little.  Still, the blipvert has survived, the advertising industry finding them especially effective if used as a “trigger” to reference a memory created by something earlier presented in some form and those who find them distasteful because they’re so often loud and brash just don’t get it; that’s the best way they’re effective.

Alex (Malcolm McDowell (b 1943)) being re-sensitised (blipvert by blipvert) in Stanley Kubrick's (1928-1999) file adaptation of A Clockwork Orange (1971).

The concept of the blipvert is sometimes attributed to US science fiction (SF) writer Joe Haldeman (b 1943) who described something close to the technique in his novel Mindbridge (1976) and it’s clearly (albeit in longer form) used in the deprogramming sessions in Anthony Burgess’s A Clockwork Orange (1962) but use predates both books.  In 1948, encouraged by their success in countering the Partito Comunista d'Italia (PCd'I; the Communist Party of Italy) in elections in the new Italian republic (the success achieved with a mix of bribery, propaganda, disinformation and some of the other tricks of electoral interference to which US politicians now so object when aimed at US polls), the newly formed US Central Intelligence Agency (CIA) turned their attentions to France where the perception of threat was even greater because the infiltration of the press, trade unions, universities, the military and many other organs of state was rife.  The US was well-placed to run effective propaganda campaigns because, uniquely in devastated, impoverished Europe, it could distribute the cubic money required to buy advertising space & airtime, employ cooperative journalists, trade union leaders & professors and even supply scarce commodities like newsprint and ink.  To try to avoid accusations of anything nefarious (and such suggestions were loud, frequent and often not without foundation) much of the activity was conducted as part of Marshall Plan Aid, the post-war recovery scheme with which the US revived post-war European economies with an injection of (what would in 2024 US$ terms) be something like US$182 billion.  As well as extensively publicizing the benefits of non-communist life compared with the lot of those behind the iron curtain, the CIA published books and other pieces by defectors from the Soviet Union.  One novelty of what quickly became an Anglo-American psychological operation (the British Political Warfare Executive (PWE) having honed successful techniques during wartime) was the use of 2-3 second blipverts spliced into film material supplied under the Marshall Plan.  The British were well aware the French were especially protective of what appeared in cinemas and would react unfavourably to blatant propaganda while they might treat something similar in print with little more than a superior, cynical smile.

Lindsay Lohan and her lawyer in court, Los Angeles, December 2011.

The blipvert is sometimes grouped with subliminal advertising and that’s convenient but they’re different both in practice and definitionally and the rule of thumb can be expressed as (1) if it can (briefly) be seen it’s a blipvert and (2) if it can’t be seen it’s subliminal.  No doubt media studies academics (of which there seem now to be many) could punch holes in that and cite a dozen or more exceptions but as a definition it at least hints in the right direction.  What subliminal advertising involves is the presentation of understandable information (which can be images, sound or text) at a level below the conscious awareness of the viewer, the idea being (unlike the confrontational blipvert) to bypass conscious perception.  The extent to which subliminal messaging is an effective way to influence consumer behaviour is debated (as is the notion of whether it’s manipulative and unethical) but the continued use of the technique in political campaigns does suggest that in that specialized field of consumer behaviour, there must be many convinced of the efficacy.  Certainly it appears to work although the less subtle forms are quickly deconstructed and critiqued, such as the sudden adoption in sports, almost as soon as tobacco advertising was banned, of color schemes triggering memories of cigarette packets.

A Marlboro Man lights up.  The "Marlboro 100s" in the gold & white pack were so-named because each stick was 100 mm (4 inch) long.

After some years of prevarication, in 2005 the European Union (EU) banned tobacco advertising “in the print media, on radio and over the internet” at the same prohibiting “tobacco sponsorship of cross-border cultural and sporting events”.  Making unlawful the promotion of a known carcinogen responsible over a lifetime of use for shortening lifespan (on average) by just under a decade sounds now uncontroversial but at the time it had been bitterly contested by industry.  Of interest to some was that despite the introduction of the laws being known for some two years, only couple of months earlier, Ferrari had signed a fifteen year, billion dollar sponsorship deal with Philip Morris, best known for their Marlboro cigarette and “Marlboro Man” advertising campaign which featured a variety of men photographed in outdoor settings, five of whom ultimately died of smoking-related diseases.

Variations on a theme of red & white.  Ferrari Formula One cars: F2007 (2007) in Marlboro livery (left), F10 (2010) with "bar code" (centre) and F14 (2014) in post bar-code scheme.

Ferrari’s lawyers took their fine-toothed legal combs to the problem and came up with a way to outsmart the eurocrats.  The Formula One (F1) cars Scuderia Ferrari ran began to appear in what had become the traditional red & white livery (the same combination used on Marlboro’s signature packets) but in the space where once had been displayed the Marlboro logo, there was instead a stylized “bar code”.  In response to a number of accusations (including many by those in the medical community) that the team was guilty of “backdoor advertising” of cigarettes, in 2008 a statement on the company website said it was “baffled”:

"Today and in recent weeks, articles have been published relating to the partnership contract between Scuderia Ferrari and Philip Morris International, questioning its legality.  These reports are based on two suppositions: that part of the graphics featured on the Formula 1 cars are reminiscent of the Marlboro logo and even that the red colour which is a traditional feature of our cars is a form of tobacco publicity.  Neither of these arguments have any scientific basis, as they rely on some alleged studies which have never been published in academic journals. But more importantly, they do not correspond to the truth.  "The so-called barcode is an integral part of the livery of the car and of all images coordinated by the Scuderia, as can be seen from the fact it is modified every year and, occasionally even during the season. Furthermore, if it was a case of advertising branding, Philip Morris would have to own a legal copyright on it.  "The partnership between Ferrari and Philip Morris is now only exploited in certain initiatives, such as factory visits, meetings with the drivers, merchandising products, all carried out fully within the laws of the various countries where these activities take place. There has been no logo or branding on the race cars since 2007, even in countries where local laws would still have permitted it.  The premise that simply looking at a red Ferrari can be a more effective means of publicity than a cigarette advertisement seems incredible: how should one assess the choice made by other Formula 1 teams to race a car with a predominantly red livery or to link the image of a driver to a sports car of the same colour? Maybe these companies also want to advertise smoking!  It should be pointed out that red has been the recognised colour for Italian racing cars since the very beginning of motor sport, at the start of the twentieth century: if there is an immediate association to be made, it is with our company rather than with our partner.”

When red & white was just the way Scuderia Ferrari painted their race cars: The lovely, delicate lines of the 1961 Ferrari Typo 156 (“sharknose”), built for Formula One's “voiturette” (1.5 litre) era (1961-1965), Richie Ginther (1930–1989), XXIII Grosser Preis von Deutschland (German Grand Prix), Nürburgring Nordschleife, August 1961.

The suggestion was of course that this was subliminal marketing (actually unlawful in the EU since the late 1950s) the mechanics being that Ferrari knew this would attract controversy and the story was that at speed, when the bar code was blurred, it resembled the Marlboro logo; racing cars do go fast but no evidence was ever produced to demonstrate the phenomenon happened in real world conditions, either when viewed at the tracks or in televised coverage.  It was possible using software to create a blurred version of the shape and there was a vague resemblance to the logo but that wasn’t the point, as a piece of subliminal marketing it worked because viewers had been told the bar code would in certain circumstances transform into a logo and even though it never did, the job was done because Marlboro was on the mind of many and doubtlessly more often than ever during the years when the logo actually appeared.  So, job done and done well, midway in the 2010 season, Ferrari dropped the “bar code”, issuing a press release: “By this we want to put an end to this ridiculous story and concentrate on more important things than on such groundless allegations.”

Stiletto

Stiletto (pronounced sti-let-oh)

(1) A small, slender knife or dagger-like weapon intended for stabbing; usually thick in proportion to its width.

(2) An archaic name for the rapier.

(3) A pointed instrument for making eyelet holes in needlework; a sharply pointed tool used to make holes in leather; also called an awl.

(4) A very high heel on a woman's shoe, tapering to a very narrow tip, also called the spike heel or stiletto heel.

(5) A beard trimmed to a pointed form.

(6) A style used in the fashioning of decorative fingernails.

1605–1615: From the Italian stiletto, a doublet of stylet, the construct being stil(o) (dagger or needle (from the Latin stilus (stake, pens))) + -etto (-ette) and from the Latin stilus came also stelo, an inherited doublet.  The etto- suffix was used to forms nouns from nouns, denoting a diminutive.  It was from the Late Latin -ittum, accusative singular of –ittus, and was the alterative suffix used to form melioratives, diminutives, and hypocoristics and existed variously in English & French as -et, in Italian as Italian -etto and in Portuguese & Spanish as -ito.  With an animate noun, -etto references as male, the coordinate female suffix being -etta, which is also used with inanimate nouns ending in -a.  It should not be confused with the homophonous suffix -eto.  Stilus was from the primitive Indo-European (s)teyg- (related to instīgō & instigare) and was cognate with the Ancient Greek στίζω (stízō) (to mark with a pointed instrument) and the Proto-Germanic stikaną (to stick, to stab).  Despite the similarity, there’s no relationship with the Ancient Greek στῦλος (stûlos) (a pillar).

A quasi-technical adoption in law-enforcement and judicial reports were the verb-forms stilettoed & stilettoing, referring to a stabbing or killing with a stiletto-like blade.  It was a popular description used by police when documenting the stabbing by wives of husbands or boyfriends with scissors or kitchen knives; use faded in the mid-twentieth century.  The idea of a long, slender beard trimmed into a pointed form being "a stiletto" popular in the sixteenth & seventeenth centuries but all such forms seem now to be referred to either as "a goatee" or "a Van Dyke".  The adjectival use can also sometimes need to be understood in the context of the phrase or sentence: "a stilettoed foot" can be either "the foot of someone wearing a shoe with a stiletto heel" or "a foot which has been stabbed with a long, thin blade.  Stiletto & stilettoing are nouns & verbs, stilettoed is a verb & adjective and stilettolike (also stiletto-like) is an adjective; the noun plural is either stilettos or stilettoes.

Of blades and heels

The stiletto design for small bladed weapons pre-dates not only modern metallurgy but antiquity itself.  The essence, a short, relatively thick blade, was technologically deterministic rather than aesthetic, most metals of the time not being as sturdy as those which came later.  Daggers were for millennia an essential weapon for personal protection but, particularly after developments in ballistics; they tended to evolve more for formal or ceremonial purposes.

The Schutzstaffel (SS) dagger model M1933 (often abbreviated to M33).

The M1933 was the standard issue to all SS members, the hilt either silver or nickel-plate while the grip was black wood.  Produced in large numbers, collectors are most attracted to the low-volume variations such as those without the manufacturer’s trade-mark or RZM control markings.  Most prized are the rare handful with a complete "Ernst Röhm inscription" which read In herzlicher freundschaft, Ernst Röhm (In heartfelt friendship, Ernst Röhm).  Given his his habits, enjoying Röhm's "friendship" would for a few have proved a double-edged sword.   Some 136,000 of the engraved SA daggers were produced, a further 9900-odd distributed to the SS.  After Röhm (1887–1934; chief of the Nazi Sturmabteilung (the stormtroopers (the SA)) was executed during the Nacht der langen Messer (Night of the Long Knives), also called Unternehmen Kolbri (Operation Hummingbird) in 1934, all holders of the Röhm Honour Dagger were ordered to have the inscription removed and most complied, the unmodified survivors thus highly collectable although in some countries, the very idea of trading Nazi memorabilia is becoming controversial.  As ceremonial devices, bladed weapons were a feature of the uniforms worn during the Third Reich (1933-1945) and they were issued to all branches of the Wehrmacht (the German armed forces) the police, the various paramilitaries, the diplomatic service as well as organizations as diverse as the railways, the fire services, the forestry service and the postal office.  In this they were continuing a long German tradition but the Nazis vision of a homogenous, obedient population included the notion that uniforms should be worn wherever possible and there is something in the cliché that (at least at the time), no German was ever as happy as when they were in uniform.

Although the term is used widely, in the narrow technical sense, not all slim, high heels are stilettos.  The classic stilettos were the extremely slender Italian originals produced between the 1930s and 1960s, the heels of which were no more than 5 mm (0.2 inch) in diameter for much of their length, flaring at the top only to the extent structurally required successfully to attach to the sole; the construction of solid steel or an alloy.  Many modern, mass-produced shoes sold as "stilettos" are made with a heel cast in a rigid plastic with an internal metal tube for reinforcement, a design not having the structural integrity to sustain the true stiletto shape.  However, English is democratic and in the context of footwear, "stiletto" now describes the visual style, regardless of the materials.

The lines of the classic black stiletto (top left) were long ago made perfect and can't be improved upon; such is the allure that many women are prepared to endure inconvenience, instability, discomfort and actual pain just to wear them.  They appeal too to designers and the style, the quintessential feminine footwear, has been mashed-up with sneakers, Crocs, work-boots, sandals and even a scuba-diver's flippers (though they really were at home only on the catwalk).  Military camouflage is often seen, designers attracted by the ultimate juxtaposition of fashion and function.  The Giuseppe Zanotti Harmony Sandals (bottom row, second from right) were worn by Lindsay Lohan on The Masked Singer (2019).    

In the world of fingernail fashioning, there are stilettos and stilettos square.  A statement shape, something of a triumph of style over functionally, the stiletto gains its dramatic effect from long and slender lines and can be shaped with either fully-tapered or partially square sides.  They’re vulnerable to damage, breaking when subjected to even slight impacts and almost never possible with natural growth and realistically, pointed nails, certainly in their more extreme iterations (the stilettos, lipstick, mountain peaks, edges, arrow-heads, claws or talons), are more for short-term effect than anything permanent.  Best used with acrylics, the knife-like style can be a danger to the nail itself and any nearby skin or stockings.  Those contemplating intimacy with a women packing these should first ponder the implications.  True obsessives insist the stiletto styles should be worn only with matching heels and then only if the colors exactly match.

1964 Hillman Imp.

The Hillman Imp was a small economy car introduced in 1964.  It was the product of the Rootes Group which needed an entry in a market segment which had been re-defined by the British Motor Corporation’s (BMC) Mini and although similar in size, the engineering was radically different: rather than the Mini's front-engine / front wheel drive (FWD) arrangement which became (and to this day remains) the template for the industry, the Imp was configured with a rear-engine and rear wheel drive (RWD), something which had for decades been a feature of small Europeans cars but was in the throes of being abandoned.  It never achieved the commercial success of the BMC product although it continued in production after 1967 when the Rootes group was absorbed by Chrysler and, perhaps remarkably, it remained on the books until 1976.  In that time, it sold in not even 10% of the volume achieved by the Mini between 1959-2000.

Hillman Imp V8, Oran Park, Sydney, Australia, 1971.

The Hillman Imp did enjoy some success in competition, winning three successive British Saloon Car Championships between 1970-1972 (competing in Class A (under 1000 cm³)) but years earlier, its light-weight and diminutive dimensions had appealed to Australian earth-moving contractor Harry Lefoe (1936-2000) who had a spare 302 cubic inch (4.9 litre) Ford (Windsor) V8 sitting in his workshop.  By then, the Imp was a Chrysler product but because the published guidelines of the Australian Sports Sedan Association (ASSA) restricted engines to those from cars built by the manufacturer of the body-shell, the small-block Ford V8 could be put in an Imp because it had been used in the earlier Sunbeam Tiger.  So the big lump of an iron V8 replaced the Imp's 875 cm³ (53 cubic inch) aluminium four and such was the difference in size that Lefoe insisted his Imp had become "mid-engined" although it seems not to have imparted the handling characteristics associated with the configuration, the stubby hybrid infamous for its tendency to travel sideways.  It was never especially successful but it was loud, fast, spectacular and always a crowd favourite.

1967 Sunbeam Stiletto.

Introduced in 1967, the Sunbeam Stiletto was a “badge-engineered” variant of the Imp (there were also Singers), the name an allusion to the larger Sunbeam Rapier (a stiletto a short blade, a rapier longer).  Badge engineering (a speciality of the British industry during the post-war years) was attractive for corporations because while it might increase unit production costs by 5-10%, the retail price could be up to 40% higher.  Very much a “parts-bin special” (although there was the odd unique touch such as the quad-headlamps and the much-admired dashboard), mostly it was a mash-up, the fastback bodywork already seen on the Imp Californian and some interior fittings and the more powerful twin carburettor engine shared with the Singer Chamois.  Curiously, some sites report the fastback lines proved less aerodynamically efficient than the Imp’s more upright original, the opposite of what was found by Ford in the US when the “formal roof” Galaxies proved too slow on the NASCAR ovals, a “semi-fastback” at essentially the same angle as the Stiletto proving the solution; the physics of aerodynamics can be counter-intuitive.  Stiletto production ceased in 1972 with the Sunbeam brand-name retired in 1976 although Chrysler used it as a model name until 1981.

Lindsay Lohan in Christian Louboutin Madame Butterfly black bow platform booties with six-inch (150 mm) stiletto heel.

Pavlova

Pavlova (pronounced pav-luh-vuh, pahv-loh-vuh, pav-luh-vuh or pah-vluh-vuh (Russian)).

A meringue cake, topped typically with whipped cream and fruit or confections.

Circa 1930: Named after Russian ballet ballerina Anna (pronounced ah-nuh) Pavlova (1885-1931).  Pavlova is a transliteration of the Russian surname Па́влова (Pávlova), the feminine variant of Па́влов (Pávlov).  Pavlova is a noun (pav the usual contraction); the noun plural is pavlovas.

Julia from Pampered Menial (1975) by Pavlov’s Dog.

Although coined at much the same time, the adjective Pavlovian is unrelated Ms Pavlova or meringue cakes.  It refers to the theories & experimental work of Russian physiologist Ivan Petrovich Pavlov (Ива́н Петро́вич Па́влов; 1849-1936), especially in connection with the conditioned salivary reflexes of dogs in response to the mental stimulus of the sound of a bell (in the West, his work was in 1911 originally referred to as the “Pavloff method” because of a misunderstanding by editors).  His work was a landmark in experimental behavioralism, inducing a dog associatively to link a biologically potent stimulus (food) with a previously neutral stimulus (a bell).  The phrase “Pavlov’s dog” entered English to describe a conditioned response (reacting to a situation on the basis of taught behavior rather than reflectively).  One interesting aspect of comrade Pavlov’s career is that he made no secret of his opposition to many aspects of communism in the Soviet state built by comrade Stalin (1878–1953; leader of the USSR 1922-1953), on occasions making his views plain even to the general secretary himself.  Despite that, no action appears ever to have been taken against him and after he died (at 86 of natural causes), he was granted a grand funeral.

Anna Pavlova with Jack.

Anna Pavlova was famous for her interpretation of The Dying Swan, a solo dance choreographed by Mikhail Fokine (1880-1942) to Camille Saint-Saëns's (1835-1921) Le Cygne (The Swan) from Le Carnaval des animaux (The Carnival of the Animals (1922)), commissioned as a pièce d'occasion (an artistic work produced for a special event) for the ballerina who performed it on some 4000 occasions.  It's a short, intense piece which follows the last moments of a swan.  Ms Pavlova for years kept a pet swan called Jack.

New Zealand is a small country in the remote South Pacific which has over the years produced some notable figures such as (1) Lord Rutherford (1871–1937) who, although a physicist who regarded other branches of science as mere forms of engineering which worked within the laws of physics, was awarded the 1908 Nobel Prize in chemistry and is most remembered for his work which led to the atom being split in 1932, (2) Sir Edmund Hillary (1919–2008) who, with the Sherpa mountaineer Tenzing Norgay (1914–1986), was the first to ascend Mount Everest and (3) Sir David Low (1891–1963) who was among the most noted and prolific political cartoonists between the troubled 1930s and the early Cold War years.  The country has also for more than a century fielded what has been usually the world’s most successful rugby union side (the recent inconsistency of the All Blacks not withstanding) and memories are long, the try disallowed by a Scottish referee in a 1905 test against Wales at Cardiff Arms Park still a sore point.

Mango, passion fruit & limoncello pavlova.

Less bitter but no less contested than the matter of the disallowed try is the origin of the Pavlova, the invention of which is claimed by both Australia and New Zealand.  What all agree is the cake is a mixture of egg whites and sugar, topped usually with cream and fresh fruit, named after the Russian ballerina Anna Pavlova who toured both countries during the 1920s.  Researchers on both sides of the Tasman Sea (referred to by locals as “the ditch”) have long trawled cook books and newspapers to find the earliest entry but according to the Oxford English Dictionary (OED), New Zealand appears to hold the evidential advantage, a recipe from there having been verified as published in 1927 while the oldest claimed entry from Australia dates from 1935.  That however resolves only the use of Ms Pavlova’s name as the description, pastry chefs adding cream to meringue known even in the nineteenth century and the 1927 recipe in the book Davis Dainty Dishes, published by the Davis Gelatine company, was a multi-colored jelly concoction.  New Zealand’s historians of food concede the culinary point but cite recipes from 1928 & 1929 which are definitely of meringue, cream and fruit.  Strangely perhaps, the OED remained on the lexicographical fence, listing the origin as an ambiguous "Austral. and N.Z."

Espresso martini pavlova

Preparation: 1 hour

Cooking: 2 hours:

Serves: 10-12

Ingredients

8 egg whites
Pinch of cream of tartar
1 tablespoon ground coffee powder
430 gm (2 cups) caster sugar
2 tablespoons of corn-flour
1 teaspoon white vinegar
600 ml (l carton) thickened cream
125 ml (½ cup) coffee liqueur
2 teaspoons cocoa powder
Chocolate-coated coffee beans (to decorate)
Dark chocolate curls (to decorate)
Coffee vodka syrup
2 tablespoons vodka
2 teaspoons arrowroot
100 grams (½ cup, firmly packed) brown sugar
125 ml (½ cup) prepared espresso coffee

Instructions

(1) Preheat oven to 120^oC (100 ^oC fan forced) (250^oF (210 ^oF fan forced).  Draw a 200 mm (8 inch) circle on 2 sheets of baking paper.  Place each sheet, marked side down, on a baking tray.

(2) Use an electric beater with a whisk attachment to whisk the egg whites and cream of tartar in a clean dry bowl until firm peaks form.  Gradually whisk in the coffee powder.  Add the sugar, 1 tablespoon at a time, whisking constantly until the sugar dissolves and the mixture is thick and glossy.  Beat in the corn-flour and vinegar.

(3) Divide meringue mixture among the 2 marked circles on the prepared trays. Use a palette knife to spread mixture into 2 evenly shaped discs.  Bake for 2 hours or until meringues are dry and crisp.  Turn off oven. Leave meringues in the oven, with the door slightly ajar, until cooled completely.

(4) Meanwhile, to make the coffee vodka syrup, combine the vodka and arrowroot in a small bowl.  Combine the sugar and coffee in a small saucepan.  Bring to the boil over high heat, stirring, until the sugar dissolves. Reduce heat and simmer for 3 minutes or until the syrup has thickened slightly.  Stir in the vodka mixture and return to the boil, boiling for 1 minute or until thickened.  Remove from heat and transfer to a small bowl and set aside to cool.  Place in the fridge until required.

(5) Use electric beaters to beat the cream in a bowl until soft peaks form. Beat in the coffee liqueur and cocoa until firm peaks form.

(6) Place 1 pavlova disc on a serving plate. Top with half the cream mixture. Drizzle with a little coffee vodka syrup. Scatter with coffee beans and chocolate curls.  Repeat with the remaining disc, cream mixture, syrup, coffee beans and chocolate curls.  Serve.

Auckland Airport, New Zealand, December 2023.

Demi, Hemi & Semi

Demi- (pronounced dem-ee or dem-ahy)

Of less than full size, status, or rank.

Circa 1350s: From the Middle English demi (half, half-sized, partial), from the twelfth century Anglo-Norman demi (half), from the Vulgar Latin dimedius, from the Classical Latin dīmidius, the construct being dis- (apart; in two) + medius (middle).  The French demi which English borrowed was a combining form which existed as noun, adjective, and adverb.  It appears in loanwords from French meaning “half” (demilune), “lesser” (demitasse), or sometimes used with a pejorative sense (demimonde) and, on that model, is also prefixed to words of English origin (eg demigod).

Hemi- (pronounced hem-ee)

A combining form meaning “half,” used in the formation of compound words (eg hemispherical, hemimorphic, hemicardia et al).

Pre 900: From the Middle English hemi from the Ancient Greek prefix ἡμι- (hēmi-) (half), from ἥμισυς (hḗmisus) (half).  It was cognate with the Classical Latin sēmi- and, as a word -forming element meaning "half", was a Middle English borrowing from the Latin hemi- which was taken directly from the Greek hēmi- (half) from the primitive Indo-European semi-, source also of the Sanskrit सामि (sāmí), the Old High German sami- (half) the Old English sam- and others, all soon denoting a partial or imperfect condition as well as the classically correct “half”.

Semi- (pronounced sem-ee)

(1) Half (strictly speaking) as in “semicircle”.

(2) In informal use, a proportion of something less than the whole.

(3) In English, a combining form or prefix (sometimes hyphenated) appended to words of any origin, usually with the senses of “partially,” “incompletely” or “somewhat” (eg semi-final, semi-trailer, semiautomatic, semi-articulated, semi-detached et al).

1400s: From the Middle English semi, from the Latin sēmi- (half).  It was connected with the Old English sōm- & sām- (half) (and related to the modern dialectical sam-), the Old High German sāmi-, the Sanskrit सामि (sāmí) and the Ancient Greek hemi-.  Ultimate root was the primitive Indo-European sēmi.

The word-forming prefixes semi-, hemi-, and demi- all began life meaning “half” but have evolved to mean other things too and exist also not just as prefixes but as stand-alone forms.  As a prefix, there appears to be 951 words with a “semi-” prefix, around 215 with a “hemi-” while a “demi” is appended only to 172, and, although it’s never been a rule, because of the origins, “demi-” is probably best paired with words of French origin, whereas “semi-” is a more natural fit with words with a Latin root.

Semi- may refer to something happening more than once (usually twice) within a certain time and is probably most familiar as “semi-final” to describe the matches of a competition which will determine the finalists.  In English it was used first to mean “half but became soon attached to concepts impossible to quantify (eg semi-abstract; semi-permanent) and thus came to mean also “virtually” or “somewhat.”

Hemi- is often employed in the hard-sciences.  It’s less commonly used than semi-, the association with the technical language of fields such as physics, chemistry, mathematics, biology and anatomy tending to mean it’s applied with more exactitude but even here, practices of use have produced anomalies.  In general use, it’s perhaps best known as a descriptor of the shape of the combustion chamber of certain internal combustion chambers to the extent of “Hemi” the noun being a Stellantis (the holding company of which Chrysler is now a part) trademark, even though many of the engines the company now market as such use a different shape.

Lindsay Lohan in demi-cup bra, photoshoot by Terry Richardson (b 1965) for Love Magazine, 2012.

The demi-cup style is most associated with the “push-up” bra of which Playtex's Wonderbra is the best known.  As the name implies, a demi-cup bra is one where the fabric covers rather less than the mainstream “full cup” bra although not necessarily half, some more revealing than others and the demi-cup is designed better to display the cleavage but need not do so in the exaggerated manner of the push-up bra, almost all of which use a kind of demi-cup.   Many demi-cup bras don't use the push-up engineering though they typically include most of the familiar components (padding, underwires etc).  A variation of the demi style is also inherent to the “plunge bra”, designed to accommodate garments with a low cut but why the industry settled on demi-cup rather than semi-cup isn't known and the term isn't universal, some manufacturers preferring "half cup".  Still, it's definitely all about the cup and to be regarded as a demi bra, it should be constructed with partial cups which cover between 50-75% of the breast and coverage should be the same all across the bra (similar to a balconette bra) as opposed to Plunge or T-Shirt bras where there's a slight dip in the middle.  Additionally, most demis use an underwire in a slightly wider than usual U-shape, evenly arched.

Demi- is used suggest something of less than full-size or status although it doesn’t of necessity imply something inferior.  In English, it’s the rarest of the three forms and, in English, was first used in heraldry, where things like demi-angels, demi-lions, demi-horses were applied to escutcheons.  It also held sway in certain niches such as the military (demi-brigade) and fashion (demi-cap; demi-lustre; demi-worsted) and coach-building (demi-limousine).  Of late, it has absorbed the sense of “virtual” as well as “lesser” and is quirky too: A demigod, while certainly not quite the real thing can be applied with either negative or positive connotations.

1969 Ford Torino Talladega.

Although modest by comparison with Chrysler’s radial Daytona and Superbird, Ford’s aerodynamic enhancements to the Torino proved surprisingly effective.  Actually, so good was the Talladega that when the sleek-looking replacement was released, the racers found it was slower and kept their Talladegas in service as long as they were eligible.  Ford had produced enough of their Fairlane-based Torino Talladegas to run them on the NASCAR circuits but needed to sell five-hundred cars with their new BOSS 429 V8 engine to reach the homologation threshold.

A helpfully inserted quirk in the NASCAR rules allowed them to put the engine in the Mustang rather than the larger Torino which would actually be used for competition.  That was good because the BOSS 429 Mustang attracted great interest and Ford sold more than enough to comply, something few were confident of doing with the Torino.  Additionally, and again helpfully, any doubts about the eligibility of the new engine had been resolved when NASCAR nudged the displacement limit by a couple of cubes.  The capacity limit of 428 cubic inches (7014 cm³) had been imposed in 1963 after Ford, caught cheating using a specialized aerodynamic part called a Starlift roof, sent one of the now-banned cars, fitted with a 483 cubic inch (7.9 litre) engine, to the Bonneville salt flats and set a number of international speed records.  NASCAR was watching what had started out as a "stock car" racing series in which essentially amateur teams could on a good day compete with the professionals, turn into a place where to be competitive, what was required was a big-budget operation, supported by the factories making available exotic and expensive components which had no purpose except on a race track.  Knowing where that 483 would be heading, NASCAR cracked down.  There would be plenty of other squabbles about engines during the 1960s but by the time the BOSS 429 came along, all was forgiven, NASCAR raising the limit to  430 cubic inches (7046 cm³).

1969 Ford Mustang Boss 429.

That was also bad because the Boss 429 was a big lump designed to fit in the wide-bodied intermediates and such was the task to shoehorn it into the narrower Mustang that the job had to be out-sourced to a specialist contractor because inserting the labour-intensive programme into the highly-structured Ford production-lines would have been too disruptive.  Thus, cars were delivered to the contractor which also received the 429 engines in crates.  Destined originally to be fitted with the physically smaller 428 SCJ engines, it was no small task to make the 429 fit, the shock towers being moved outwards along with the upper and lower control arms and stiffer springs were fitted and, surprisingly, it actually worked out quite well.  Although the bulky heads made the 429 a wide piece of machinery, they were made of aluminum and the total package was barely heavier than the all-iron 428 and some even included a few magnesium components which were lighter still.  The changes made had the effect of moving the front wheels further apart and increasing their negative camber and this gave the Boss 429 the best handling and road manners of any big-block Mustang although, it was still a front-heavy thing and clumsy to drive at low speed.  Re-locating the battery to the boot helped weight-distribution a little but none of the changes were ever going to make it behave like a Lotus Elan.

1969 Ford Mustang Boss 429.

However, one implication of things being such a tight fit was that there wasn’t the space to fit a free-flowing exhaust system so in the Mustang it was never possible for the engine to breathe as deeply as it did in the big NASCAR stockers and knowing this, Ford made no attempt to configure the it for maximum output, the carburetor smaller than those used on the Boss 302 and Boss 351.  Nor were the internal components assembled in a specification consistently intended to maximize performance, some built (supposedly in error) with a valve train which limited engine speed and the project anyway was a homologation exercise designed to sell the requisite number of parts required to qualify them for competition although, despite the low production spread over only two years, there were three distinct variations.  The first few hundred (S-code) units used heavy connecting rods secured with ½ inch (13 mm) bolts whereas the rest of the 1969 run and most built in 1970 (T-code) were fitted with lighter pieces and ⅜ (9 mm) bolts and initially, the early T-code engines carried over the hydraulic lifters from the S-code but production soon switched to a solid lifters with a somewhat more lumpy camshaft, the magnesium valve covers at the same time replaced with units cast in aluminum.  Finally there was an edition (A-code) which appeared in the last few of those built in 1970 and it varied from the T-series specification only in in some changes to the plumbing associated with what was still a quite rudimentary anti-pollution system.  Whatever its variations, a Boss 429 Mustang was what it was.

The shotgun ports.

It was also what it was not.  Expectations were high and, on paper, not unreasonable because the notion of putting a genuine seven litre racing engine in something as (relatively) small as the Mustang did hint at something special but, with the strangled engine, although quick, it wasn’t a cataclysm on wheels and the opposition was quicker still.  One of the issues was the fundamental design of those exotic heads.  Nick-named shotgun because the intake and exhaust ports reminded many of the double-barrels of a 12-gauge (although each was large enough almost to swallow a tennis ball), they worked admirably in the Talladegas at high-speed where they were matched with a big carburetor and free-flowing exhaust system.  On the street however, the big shotgun ports rarely saw sustained high-speed running and their sheer size meant the fuel at low speed didn’t achieve the flow-rate necessary for the low-end response needed on the street or strip.

1969 Boss 429 on stand with open exhaust headers.

Prior to release there was talk of quarter-mile runs somewhere in the twelve second range but in reality, no stock Boss 429 ever went quicker than low fourteens, enough to put it in the upper echelon of the muscle car era but there were those who expected more.  More did come, as initially disillusioned engine builders began to understand what it responded to, it became for decades one of the dominant forces in drag-racing, the shotgun ports meaning it took to forced aspiration like few engines, twin-turbocharged Boss engines able to generate thousands of horsepower.

1970 Ford Mustang Boss 429.

So it was quite a legacy and the surviving Mustangs now sell for as much as US$250,000.  Although Ford was compelled to build only 500, 857-odd were sold in 1969 and 499 in 1970 so it’s a bit of an oddity, quite a rarity yet almost mass-produced compared with some of the limited production machines of the muscle car era and such is the allure that there are companies now producing reproductions of the famous heads, modified slightly to fit regular production blocks.  It’s never been known how much money Ford lost on each Mustang it sold but, fitted with the famous Holley Dominator 1150 CFM carburetor and open exhaust headers suited to an engine happiest running at full throttle, the BOSS 429 did its job on the circuits and the company seemed happy with the investment although its life as a flag-bearer would be short, motorsport soon to be neglected as a changing world and a onrush of legislation demanding compliance needing the resources the circuits soaked up.

The semi-hemi combustion chamber.

As well as being nick-named the shotgun, it was also called the semi-hemi.  The BOSS 429’s combustion chambers weren’t actually hemispherical but they tended towards the shape (and the ones used in the race cars sometimes were).  Although Ford apparently would have preferred to have them known as a "blue crescent", it didn't catch on and, there being no obvious word in use to describe what they looked like, they came to be known as semi-hemi.  Musicologists had already gone one better than Ford.  Noting that English had contrived to borrow three words from Antiquity in order to have three prefixes meaning “half”, they invented hemidemisemiquaver to describe a sixty-fourth of a note (ie a half of a half of a half of an eighth note), a coining from that year of semi-revolutions: 1848.